Design and characterization of solar absorbing multilayer stack based on Al/ Cr-N-O / SiO2 layers
Source abstract
Abstract
Abstract Design, preparation and characterization of a solar selective absorbing coating based on chromium oxynitride are reported in this contribution. All the layers were deposited by reactive magnetron sputtering in a horizontal in-line sputtering system. The optical constants of individual layers were obtained by spectroscopic ellipsometry measurement and fitting. The absorbing multilayer stack including, from substrate to air interface, Al infrared reflective layer/ (Cr/CrNx//CrNxOy) composite absorbing layer/ SiO2 antireflective layer were then designed and fabricated based on their optical properties and thickness optimization. This absorbing coating is characterized by the simple and stable reactive magnetron sputter coating process with no need for precise control of single layer thickness and reactive gas partial pressure. A solar absorptance more than 95% and thermal emissivity less than 4% for operation temperature of 100 °C were obtained by analyzing the measured spectra data. After aging test in air at 250 °C for 200 h, the performance criterion (PC) was below 1%, and the deterioration mechanism was further analyzed combined with XPS depth profile.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. TiNOX energy 〈http://www.almecogroup.com/en/pagina/53-tinox-energy-cu〉 (Accessed 4 June 2018).
3. The optical properties of sputtered composite of Al-AlN10.1016/j.solmat.2005.11.006 ↗
4. Development of large area sputtered solar absorber coatings10.1016/S0022-3093(97)00283-4 ↗
5. Industrial sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
6. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(NxN1-x). Part 1: advanced microstructural characterization and optical simulation10.1016/j.solmat.2017.10.015 ↗
7. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3-Based nanostructured multilayer absorber coating through graded optical constants10.1016/j.solmat.2017.11.013 ↗
8. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modeling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
9. Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiOy layers10.1016/j.apsusc.2015.07.193 ↗
10. Materials for photothermal solar energy conversion10.1007/BF00700767 ↗
11. Characterization of spectral selectivity of tin-doped In2O3 thin films using spectroscopic ellipsometry10.1016/j.surfcoat.2014.09.055 ↗
12. Optical simulation and fabrication of HfMoN/HfON/Al2O3 spectrally selective coating10.1016/j.solmat.2015.04.031 ↗
13. Characterization of plasmonic effects in thin films and metamaterials using spectroscopic ellipsometry10.1016/j.progsurf.2011.08.004 ↗
14. J.A. Woollam Co, Inc., Guide to Using WVASE32 Spectroscopic Ellipsometry Data Acquisition and Analysis Software, 2008.
15. More · 1978 · 630 · 105
16. Comparison of three methods for ellipsometry characterization of thin absorbing films10.1016/j.tsf.2017.06.060 ↗
17. Palik · 1985
18. Optical properties of higher and lower refractive index composites in solar selective coatings10.1016/S0927-0248(01)00045-9 ↗
19. Structure and optical properties of pulsed sputter deposited CrxOy Cr Cr2O3 solar selective coatings10.1063/1.2831364 ↗