journal article·2018-11

BBr3 diffusion with second deposition for laser-doped selective emitters from borosilicate glass

Elmar Lohmüller, Sabrina Lohmüller (née Werner), Nico Wöhrle, Udo Belledin, Andreas Wolf

Publisher page

Abstract

Abstract We study a boron tribromide (BBr3) diffusion process with second deposition realized by active nitrogen flow through the BBr3 bubbler at the end of the process with respect to laser doping. Compared to the reference BBr3 diffusion without second deposition, the new BBr3 diffusion provides a two times higher boron dose within the borosilicate glass (BSG)/silicon dioxide (SiO2) stack layer grown on the silicon surface. The second deposition leads to both thinning of the intermediate SiO2 layer and 11 nm-growth of the BSG layer, which results in an 8 nm thicker BSG/SiO2 stack layer with a total thickness of 42 nm. These altered properties of the BSG/SiO2 layer facilitate the formation of laser-doped selective boron emitters, while the second deposition hardly affects the as diffused charge carrier concentration profile. The obtained emitter properties, sheet resistance Rsh ≈ 100 Ω/sq and emitter dark saturation current density j0e ≈ 25 fA/cm2 (textured surface, Al2O3/SiNX passivation) for the photoactive part of the emitter are not affected by the introduced second deposition step. For the laser-doped part of the emitter, the charge carrier concentration after laser doping is higher for the BBr3 diffusion with second deposition resulting in stronger local doping with up to 10 Ω/sq lower Rsh. The application of an analytical model to calculate specific contact resistances ρC in dependence of e.g. dopant concentration of the laser-doped profiles and crystallite penetration depth dcryst reveals that ρC is expected to benefit largely from the altered profile shapes due to laser doping for the BBr3 diffusion with second deposition. A relative decrease in ρC of up to 90% and 50% is found for small dcryst (depth of several tens of nm) and large dcryst (depth of several hundreds of nm), respectively. Another potential advantage of the second deposition holds for emitter dark saturation current densities at the metal-silicon interface j0,met. A 3D simulation model that is based on metal crystallites penetrating into the emitter considering the different doping profiles after laser processing yields a j0,met ≈ 740 fA/cm2 for small dcryst that is 14% relatively lower for the BBr3 diffusion with second deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Etch-back of p+ structures for selective boron emitters in n-type c-Si solar cells10.1016/j.egypro.2014.08.086 ↗
2. F. Kiefer, R. Peibst, T. Ohrdes, J. Krügener, H.J. Osten, R. Brendel, Emitter recombination current densities of boron emitters with silver/aluminum pastes, in: Proceedings of the 40th IEEE Photovoltaic Specialists Conference, Denver, USA, 2014, pp. 2808–2812.10.1109/PVSC.2014.6925514 ↗
3. Y. Schiele, G. Hahn, B. Terheiden, Contacting and recombination analysis of boron emitters via etch-back for advanced n-type Si solar cells, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014, pp. 825-829.
4. S. Werner, E. Lohmüller, U. Belledin, A.H.G. Vlooswijk, R.C.G. Naber, S. Mack, A. Wolf, Optimization of BBr3 diffusion processes for n-type silicon solar cells, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 637–641.
5. N. Wöhrle, E. Lohmüller, S. Werner, J. Greulich, Development, characterization, and modelling of doping profile, contact resistance, and metal spiking in diffused and screen-printed boron emitters, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 495–501.
6. Extending the limits of screen-printed metallization of phosphorus- and boron-doped surfaces10.1016/j.solmat.2016.05.064 ↗
7. Numerical simulation of doping process by BBr3 tube diffusion for industrial n-type silicon wafer solar cells10.1109/JPHOTOV.2017.2679342 ↗
8. J. Libal, R. Petres, T. Buck, R. Kopecek, G. Hahn, R. Ferre, M. Vetter, I. Martin, K. Wambach, I. Roever, P. Fath, N-Type multicrystalline silicon solar cells: BBr3-diffusion and passivation of p+-diffused silicon surfaces, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference: 2005, Barcelona, Spain, 2005, pp. 793–796.
9. Oxidation enhanced diffusion of boron and phosphorus in (100) silicon10.1149/1.2129384 ↗
10. Redistribution of acceptor and donor impurities during thermal oxidation of silicon10.1063/1.1713825 ↗
11. T. Buck, J. Theobald, M. Nejati, D. Rudolph, A. Helfricht, G. Schubert, V.D. Mihailetchi, R. Harney, Engineering and characterization of metal contacts to p+-doped silicon, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014, pp. 401–405.
12. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
13. E. Lohmüller, S. Werner, B. Thaidigsmann, N. Wöhrle, S. Mack, F. Clement, D. Biro, The HIP–MWT+ solar cell concept on n-type silicon and metallization-induced voltage losses, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014, pp. 635–641.
14. Metallization-induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
15. Towards understanding the characteristics of Ag-Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
16. A. Edler, V.D. Mihailetchi, C. Comparotto, L.J. Koduvelikulathu, R. Kopecek, R. Harney, T. Böscke, J. Lossen, On the metallization losses of bifacial n-type silicon solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012, pp. 1429–1431.
17. Development towards 20% efficient Si MWT solar cells for low-cost industrial production10.1016/j.egypro.2011.06.094 ↗
18. Y.-.W. Ok, A. Upadhyaya, F. Zimbardi, Y. Tao, I.B. Cooper, A. Rohatgi, A.F. Carroll, T. Suess, Effect of Al content on the performance of Ag/Al screen printed n-type Si solar cells, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, Tampa, USA, 2013, pp. 2247–2249.10.1109/PVSC.2013.6744924 ↗
19. Impact of boron doping profiles on the specific contact resistance of screen printed Ag-Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
20. Screen printing metallization of boron emitters10.1002/pip.933 ↗
21. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
22. Contacting boron emitters on n-type silicon solar cells with aluminium-free silver screen-printing pastes10.1002/pssr.201510443 ↗
23. Reverse bias behavior of diffused and screen-printed n-type Cz-Si solar cells10.1109/JPHOTOV.2014.2355034 ↗
24. L. Ventura, A. Slaoui, J.C. Muller, Realization of selective emitters by rapid thermal and laser assisted techniques, in: Proceedings of the 13th European Photovoltaic Solar Energy Conference, Nice, France, 1995, pp. 1578–1581.
25. U. Jäger, M. Okanovic, M. Hörteis, A. Grohe, R. Preu, Selective emitter by laser doping from phosphosilicate glass, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2009, pp. 1740–1743.
26. Add-on laser tailored selective emitter solar cells10.1002/pip.1007 ↗
27. G. Hahn, Status of selective emitter technology, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010, pp. 1091–1096.
28. Benefit of selective emitters for p-type silicon solar cells with passivated surfaces10.1109/JPHOTOV.2012.2230685 ↗
29. S. Fernandez-Robledo, U. Jäger, E. Lohmüller, J. Nekarda, Laser doping from borosilicate glass for metallization of boron emitters, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 1126–1130.
30. S. Werner, E. Lohmüller, J. Weber, A. Wolf, Suitability of POCl3 diffusion processes with in-situ oxidation for forming laser-doped selective emitters with low carrier recombination, in: Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2017, pp. 631–636.
31. Loss analysis of 22% efficient industrial PERC solar cells10.1016/j.egypro.2017.09.322 ↗
32. Advanced BBr3 diffusion with second deposition step for selective emitter formation by laser doping10.1002/pssr.201700442 ↗
33. Structure and composition of phosphosilicate glass systems formed by POCl3 diffusion10.1016/j.egypro.2017.09.280 ↗
34. J.R. Köhler, P. Grabitz, S.J. Eisele, T.C. Röder, J.H. Werner, Laser doped selective emitters yield 0.5% efficiency gain, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2009, pp. 1847–1850.
35. G. Poulain, D. Blanc-Pélissier, A. Focsa, B. Bazer-Bachi, B. Semmache, Y. Pellegrin, M. Lemiti, Laser-induced boron diffusion for selective emitter n-type solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, Germany, 2012, pp. 2075–2078.10.1016/j.egypro.2012.07.093 ↗
36. Doping profile analysis in Si by electrochemical capacitance-voltage measurements10.1149/1.2044101 ↗
37. R. Bock, P.P. Altermatt, J. Schmidt, Accurate extraction of doping profiles from electrochemical capacitance voltage measurements, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2008, pp. 1510–1513.
38. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
39. Formation of phosphosilicate glass films on silicon dioxide
40. Ellipsometric investigations of boron-rich layers on silicon10.1149/1.2411139 ↗
41. Surface passivation of boron-diffused junctions by a borosilicate glass and in situ grown silicon dioxide interface layer10.1109/JPHOTOV.2018.2792422 ↗
42. Nölte · 2002
43. Challenges for lowly-doped phosphorus emitters in silicon solar cells with screen-printed silver contacts10.1016/j.egypro.2017.09.274 ↗
44. Field and thermionic-field emission in Schottky barriers10.1016/0038-1101(66)90097-9 ↗
45. Normalized thermionic-field (T-F) emission in metal-semiconductor (Schottky) barriers10.1016/0038-1101(69)90117-8 ↗
46. Electron tunneling and contact resistance of metal-silicon contact barriers10.1016/0038-1101(70)90056-0 ↗
47. A model for specific contact resistance applicable for titanium silicide-silicon contacts10.1016/0038-1101(96)00091-3 ↗
48. Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application10.1063/1.4927667 ↗
49. J. Engelhardt, A. Frey, S. Fritz, G. Micard, S. Riegel, G. Hahn, B. Terheiden, Contact formation on boron doped silicon substrates from passivating PECV-deposited dielectric doping layers with anti-reflective properties by screen-printing Ag pastes for high-efficiency n-type silicon solar cells, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 351–354.
50. J. Engelhardt, S. Fritz, E. Emre, G. Hahn, Contact formation on p-doped Si by screen-printing pure Ag pastes for bifacial n-type Si solar cells, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, Munich, Germany, 2016, pp. 647–650.
51. Low-ohmic contacting of laser-doped p-type silicon surfaces with pure Ag screen-printed and fired contacts10.1002/pssa.201700587 ↗
52. E. Lohmüller, S. Werner, M.H. Norouzi, S. Mack, M. Demant, S. Gutscher, P. Saint-Cast, S. Wasmer, N. Wöhrle, B. Bitnar, S. Steckemetz, P. Palinginis, H. Neuhaus, M. König, A. Wolf, Bifacial p-type silicon PERL solar cells with screen-printed pure silver metallization and 89% bifaciality, in: Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2017, pp. 418-423.
53. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
54. Simulating the interface morphology of silver thick film contacts on n-type Si-(100) and Si-(111)10.1063/1.4752228 ↗
55. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000, pp. 1152–1155.
56. Synopsys, Sentaurus Device User Guide H-.03, 2013.
57. The physics and modeling of heavily doped emitters10.1109/T-ED.1984.21805 ↗