journal article·2017-10

Novel form-stable phase change material composite for high-efficiency room temperature control

Andrey A. Chernousov, Ben Y.B. Chan

Publisher page

Abstract

Abstract Phase change material (PCM) driven thermal energy storage (TES) systems are showing promise for cooling energy saving in residential and office buildings. State-of-the-art TES for interior items such as tiles and furnishings require the material matrix to transfer heat rapidly between the adjacent PCM and the indoors. TES developers offer a large number of PCM composites, in which, however, the high thermal conductivity counterbalances the PCM volume capacity and material form-stability above the PCM melting point. Herein, we report a novel aluminium matrix with open ultrathin (mainly, below 150 nm) pores and the developed surface area (~7 m 2 g -1 ) that solves the dilemma. The porous (22–46 vol%) aluminium matrix results from the compacted aluminium nanoflakes reactively (1 min at 873K in N 2 ) sintered with the aid of oxidation of the nanoflake protector, stearic acid. The preparation method leads to partial transformation of the pores and an increase of the specific surface area. In the PCM fraction range, the prepared composite has the thermal conductivity in the range of 10–60 W m -1 K -1 . The effects of the PCM volume fraction on the thermal conductivity and specific heat capacity are described. As an example, we have considered an affordable organic PCM such as coconut oil that can readily cling to the Al 2 O 3 -filmed surface of the material pores through the hydroxyl functionalities. With the use of vacuum infiltration, heated (373 K) coconut oil deeply penetrates the matrix pores. The PCM composite has shown the excellent form stability in terms of the coconut oil mass loss (below 1.5 wt%) at an elevated temperature of 318 K for over 1000 h. Applied internally, this kind of TES composite can rapidly and efficiently transfer a considerable amount of heat energy within a large building area and regulate the indoor temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Fliescher Thermal · 2015
2. Cabeza · 2015
3. 2017
4. Thermal conductivity studies on ceramic floor tiles10.1016/j.ceramint.2010.09.023 ↗
5. Review of thermal energy storage technologies based on PCM application in buildings10.1016/j.enbuild.2013.08.006 ↗
6. Lightweight dense/porous PCM-ceramic tiles for indoor temperature control10.1016/j.enbuild.2015.09.019 ↗
7. Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material10.1016/j.apenergy.2016.05.050 ↗
8. High thermal conductivity phase change composite with a metal-stabilized carbon-fiber network10.1016/j.apenergy.2016.04.070 ↗
9. Preparation and performances of bulk porous Al foams impregnated with phase-change-materials for thermal storage10.1016/j.pnsc.2012.05.004 ↗
10. Commercial applications of metal foams: their properties and production10.3390/ma9020085 ↗
11. Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems-a review10.1016/j.applthermaleng.2010.02.018 ↗
12. Self‐assembly of stearic acid on aluminium: the importance of oxide surface chemistry10.1002/sia.1919 ↗
13. Adsorption and desorption of stearic acid self-assembled monolayers on aluminum oxide10.1021/la061914n ↗
14. Ordered nanostructures on a hydroxylated aluminum surface through the self-assembly of fatty acids10.1021/la2051542 ↗
15. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility10.1016/j.scriptamat.2011.05.022 ↗
16. Flake thickness effect of Al2O3/Al biomimetic nanolaminated composites fabricated by flake powder metallurgy10.1016/j.msea.2013.11.086 ↗
17. Sintering of Aluminium and its Alloys
18. SAP-like ultrafine-grained Al composites dispersion strengthened with nanometric AlN10.1016/j.msea.2013.09.027 ↗
19. Nanoscaled Al–AlN composites consolidated by equal channel angular pressing (ECAP) of partially in situ nitrided Al powder10.1016/j.msea.2012.11.040 ↗
20. The thermal decomposition behaviors of stearic acid, paraffin wax and polyvinyl butyral10.1016/S0040-6031(00)00680-8 ↗
21. Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings10.1016/j.solmat.2015.07.026 ↗
22. Preparation and characterization of a lauric-myristic-stearic acid/Al2O3- loaded expanded vermiculite composite phase change material with enhanced thermal conductivity10.1016/j.solmat.2017.03.003 ↗
23. Preparation, characterization and thermal properties of fatty acid eutectics/ bentonite/ expanded graphite composites as novel form–stable thermal energy storage materials10.1016/j.solmat.2017.03.026 ↗
24. Thermal properties of shape-stabilized phase change materials using fatty acid ester and exfoliated graphite nanoplatelets for saving energy in buildings10.1016/j.solmat.2015.06.040 ↗
25. Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity10.1016/j.solmat.2013.09.037 ↗
26. Clements, viscosities of vegetable oils and fatty acids10.1007/BF02637678 ↗
27. Wettability of mineral and metallic powders: applicability and limitations of sessile drop method and Washburn's technique10.1016/j.powtec.2012.04.016 ↗
28. Influence of particles size on thermal properties of aluminium powder10.1016/j.actamat.2006.12.017 ↗
29. Surface modification of alumina powder particles through stearic acid for the fabrication of translucent alumina ceramics by injection molding10.1016/j.ceramint.2016.07.164 ↗
30. Effect of polymorphic phase transformations in Al2O3 film on oxidation kinetics of aluminum powders10.1016/j.combustflame.2004.10.010 ↗
31. Effect of polymorphic phase transformation in alumina layer on ignition of aluminium particles10.1080/13647830600578506 ↗
32. An experimental study on the thermal conductivity of aluminium foams by using the transient plane source method10.1016/j.ijheatmasstransfer.2007.11.062 ↗
33. Highly heat conductive open-porous aluminium fibre based parts for advanced heat transfer applications10.1002/mawe.201200949 ↗
34. On the thermal conductivity of sintered metallic fibre structures10.1016/j.ijheatmasstransfer.2012.01.016 ↗
35. Synergistic enhancement of thermal conductivity for expanded graphite and carbon fiber in paraffin/EVA form-stable phase change materials10.1016/j.solener.2016.01.011 ↗
36. Yaws' handbook of Antoine coefficients for vapor pressure
37. Model-free kinetics applied to the vaporization of caprylic acid10.1007/s10973-009-0301-3 ↗
38. Hydration of γ-alumina in water and its effects on surface reactivity10.1021/la025651i ↗
39. Lide · 1998