Spectrophotometric measurements and ray tracing simulations of mirror light pipes to evaluate the color of the transmitted light
Source abstract
Abstract
Tubular daylighting systems are designed to guide light to the building׳s core using a highly reflective pipe. The intensity of the transmitted light is essential for the performance of the system. For the qualitative perception of the provided illumination, the color of the delivered light is also an important aspect. For highly reflective mirror light pipes, spectral variations are generally assumed not to affect the color of the transmitted light. Here, spectrophotometric measurements and ray tracing simulations of mirror light pipes are used to verify this commonly made assumption. The characterization methods employ spectral evaluations for both direct and diffuse incident light. The color properties are evaluated for mirror light pipes with a length to diameter aspect ratio of up to 16, using the CIE chromaticity diagram and CIELAB coordinates. For the xy chromaticity diagram, a larger color shift was noted for different illuminants than as a result of the optical properties of the reflective material. Using the CIELAB coordinates, a small color shift was noted for light incident at low solar altitudes. Overall, highly reflective films with spectral variations of a few percent do not markedly affect the color of the transmitted light.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Color Science and Applications · Impact of Light on Environment and Health · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Daylighting enhancement with light pipes coupled to laser-cut light-deflecting panels10.1177/14771535950270010101 ↗
2. V. Garcia Hansen, I. Edmonds, J. M. Bell, Improving daylighting performance of mirrored light pipes, in: Proceedings of PLEA2009—26th Conference on Passive and Low Energy Architecture, Quebec City, Canada, 2009.
3. Light piping performance enhancement using a deflecting sheet10.1191/1365782806li167oa ↗
4. Design of a nonimaging fresnel lens for solar concentrators10.1016/S0038-092X(98)00143-1 ↗
5. Hotspots in cylindrical mirror light pipes10.1191/1365782806li151oa ↗
6. Optimisation and design of ducted daylight systems10.1177/1477153509355500 ↗
7. Efficient tubular light guide with two-component glazing with lambertian diffuser and clear glass10.1016/j.apenergy.2008.10.003 ↗
8. New efficient light guide for interior illumination10.1364/AO.21.002755 ↗
9. Smith · 2011
10. L.C. Maxey, D.D. Earl, J. D. Muhs, Luminaire development for hybrid solar lighting applications, in: Proceedings of SPIE—the International Society for Optical Engineering, vol. 5185, 2004, pp. 49–55.
11. A. Zastrow, V. Wittwer, Daylighting with mirror light pipes and with fluorescent planar concentrators—first results from the demonstration project Stuttgart–Hohenheim, in: Proceedings of SPIE—The International Society for Optical Engineering, vol. 692, 1986, pp. 227–234.10.1117/12.936710 ↗
12. Cylindrical mirror light pipes10.1016/0927-0248(94)00172-3 ↗
13. Single-beam integrating sphere spectrophotometer for reflectance and transmittance measurements versus angle of incidence in the solar wavelength range on diffuse and specular samples10.1063/1.1149781 ↗
14. J. Callow, Daylighting using tubular light guide systems (Ph.D. thesis), University of Nottingham, 2003.
15. Method for more accurate transmittance measurements of low-angle scattering samples using an integrating sphere with an entry port beam diffuser10.1364/AO.50.000999 ↗
16. Evaluation of correction factors for transmittance measurements in single-beam integrating spheres10.1364/AO.33.006098 ↗
17. H. Goudey, C. Kohler, M. Rubin, Complex Product Visible Transmittance Research Tubular Daylighting Devices, NFRC Project Report, Project Number 05-105-DR4, 2010.
18. Lambda Research Corporation, Tracepro User׳s Manual, Release 6.0, 2009.
19. J. Klems, Angular Bases for Bidirectional Calculations, Technical Report, LBNL Report (unpublished), 2004.
20. A. McNeil, J.C. Jonsson, D. Appelfeld, G. Ward, E.S. Lee, A Validation of a Ray-tracing Tool Used to Generate Bi-directional Scattering Distribution Functions for Complex Fenestration Systems, LBNL, Technical Report, 2011.
21. E.R. Freniere, G.G. Gregory, R. Chase, Interactive software for optomechanical modeling, in: Proceedings of SPIE—The International Society For Optical Engineering, vol. 3130, 1997, pp. 128–133.
22. Light-scattering properties of a Venetian blind slat used for daylighting applications10.1016/j.solener.2010.09.005 ↗
23. Boyce · 2003
24. Commission Internationale de l׳Eclairage (CIE), Colorimetry 15:2004, 3rd ed., CIE Technical Report, 2004.
25. Wyszecki · 1982
26. Solatube International, Inc., 〈www.solatube.com/common/_technical_resources/asset_upload_file283_115035.pdf〉 (accessed 20.9.2012).