Environmental durability of electrochromic switchable mirror glass at sub-zero temperature
Source abstract
Abstract
Abstract Electrochromic switchable mirrors are expected to be used in energy-saving windows because their optical properties can be changed by application of a voltage. For practical use, the negative impact of environmental conditions on the optical switching properties of the device should be minimized. In this work, the durability of an electrochromic device was investigated in a thermostat/humidistat chamber at −5 °C. After devices were stored at sub-zero temperatures, the switching speed and maximum transmittance decreased only slightly with increasing exposure time. In other words, degradation of the device did not significantly occur at sub-zero temperatures. In comparison, the optical switching properties of a device stored at 40 °C and 60% relative humidity severely deteriorated. This deterioration was attributed to the degradation of the surface of the Mg 4 Ni optical switching layer. This layer was affected by the environmental conditions, and in particular changed from the metallic magnesium state to a non-metallic state. In future work, we will investigate suitable measures for preventing environmental damage to the device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Advanced Memory and Neural Computing · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Optical switching of Mg-rich Mg–Ni alloy thin films10.1063/1.1530378 ↗
2. Toward solid-state switchable mirror mirrors using magnesium-rich magnesium–nickel alloy thin films10.1143/JJAP.46.5168 ↗
3. Yttrium and lanthanum hydride films with switchable optical properties10.1038/380231a0 ↗
4. Switchable mirrors based on nickel–magnesium films10.1063/1.1371959 ↗
5. Mixed metal films with switchable optical properties10.1063/1.1454218 ↗
6. Metal hydride switchable mirrors: factors influencing dynamic range and stability10.1016/j.solmat.2005.02.015 ↗
7. Aluminum buffer layer for high durability of all-solid-state switchable mirror based on magnesium–nickel thin film10.1063/1.2761842 ↗
8. Accelerated degradation studies on electrochromic switchable mirror glass based on magnesium–nickel thin film in simulated environment10.1016/j.solmat.2010.05.034 ↗
9. Surface analysis of electrochromic switchable mirror glass based on magnesium–nickel thin film in accelerated degradation test10.2320/matertrans.MBW201010 ↗
10. Tantalum oxide thin film prepared by reactive dc magnetron sputtering using hydrogen-containing gas to fabricate all-solid-state switchable mirror glass10.1149/1.3281168 ↗
11. X-ray excited Auger and photoelectron spectra of magnesium, some alloys of magnesium and its oxide10.1088/0305-4608/5/2/020 ↗
12. Hydrogen in magnesium alloys and magnesium interfaces: preparation, electronic properties and interdiffusion10.1016/0022-5088(91)90207-K ↗
13. XPS depth profile analysis of non-stoichiometric NiO films10.1002/sia.1640 ↗
14. Use of an Auger parameter for characterizing the Mg chemical state in different materials,10.1016/j.surfcoat.2003.10.062 ↗