Evaluation of vanadium substituted In2S3 as a material for intermediate band solar cells
Source abstract
Abstract
Abstract The potential of vanadium substituted In2S3 as the active material in intermediate band solar cells (IBSCs) is investigated. The study is performed with a detailed balance model developed by Cuadra et al. that takes into account the shape and overlap of the absorption coefficients. Despite having values of the band gaps that could in principle lead to highly efficient IBSCs, it is found that cells with a practical thickness made of V2In14S24 have a lower efficiency limit than conventional single band gap solar cell materials. It has previously been explained why overlapping absorption coefficients requires the cell thickness to be optimized. In this work it is shown that the thickness dependency of the cell efficiency can have two peaks. In this particular case the two peaks occur at cell thicknesses around 1 μ m and 1 m. The reason for this double peaked dependency is processes where photons are emitted over one band gap and reabsorbed over another. Some of these processes can happen at very low rates and thus not give a significant contribution before a very thick cell is considered. For cells with a reasonable thickness, maximum efficiencies of 20.8% and 26.4% are found for light intensities corresponding to 1 and 1000 suns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. P. Wahnón, C. Tablero, Ab initio electronic structure calculations for metallic intermediate band formation in photovoltaic materials, Physical Review B 65(16) (2002). doi: 10.1103/PhysRevB.65.165115.10.1103/PhysRevB.65.165115 ↗
2. K. Yu, W. Walukiewicz, J. Wu, W. Shan, J. Beeman, M. Scarpulla, O. Dubon, P. Becla, Diluted II–VI Oxide Semiconductors with Multiple Band Gaps, Physical Review Letters 91(24) (2003). doi: 10.1103/PhysRevLett.91.246403.10.1103/PhysRevLett.91.246403 ↗
3. Properties of intermediate band materials10.1016/j.solmat.2004.06.016 ↗
4. Energetics of formation of TiGa3As4 and TiGa3P4 intermediate band materials10.1063/1.2140695 ↗
5. First principles calculation of isolated intermediate bands formation in a transition metal-doped chalcopyrite-type semiconductor10.1002/pssa.200566179 ↗
6. Survey of intermediate band materials based on ZnS and ZnTe semiconductors10.1016/j.solmat.2005.04.036 ↗
7. Evaluation of the efficiency potential of intermediate band solar cells based on thin-film chalcopyrite materials10.1063/1.2901213 ↗
8. P. Palacios, I. Aguilera, K. Sánchez, J. Conesa, P. Wahnón, Transition-metal-substituted indium thiospinels as novel intermediate-band materials: prediction and understanding of their electronic properties, Physical Review Letters 101(4) (2008). doi: 10.1103/PhysRevLett.101.046403.10.1103/PhysRevLett.101.046403 ↗
9. Synthesis and spectral properties of nanocrystalline V-substituted In 2 S 3, a novel material for more efficient use of solar radiation10.1021/cm801128b ↗
10. Potential of Mn doped In1−xGaxN for implementing intermediate band solar cells10.1016/j.solmat.2008.12.031 ↗
11. Assessment through first-principles calculations of an intermediate-band photovoltaic material based on Ti-implanted silicon: interstitial versus substitutional origin10.1103/PhysRevB.79.165203 ↗
12. Formation of a reliable intermediate band in Si heavily coimplanted with chalcogens (S, Se, Te) and group III elements (B, Al)10.1103/PhysRevB.82.165201 ↗
13. Electronic and optical properties of the group IV doped copper gallium chalcopyrites10.1016/j.tsf.2010.09.039 ↗
14. Acceptor and donor ionization energy levels in O-doped ZnTe10.1016/j.commatsci.2010.05.023 ↗
15. Enhancement of optical absorption in Ga-chalcopyrite-based intermediate-band materials for high efficiency solar cells10.1016/j.solmat.2010.06.019 ↗
16. Theoretical optoelectronic analysis of MgIn2S4 and CdIn2S4 thiospinels: effect of transition-metal substitution in intermediate-band formation10.1103/PhysRevB.81.075206 ↗
17. Ab initio study of GaN periodically substituted by transition metal for intermediate band materials10.1002/pssb.201046474 ↗
18. Increasing the efficiency of ideal solar cells by photon induced transitions at intermediate levels10.1103/PhysRevLett.78.5014 ↗
19. N. López, L. Reichertz, K. Yu, K. Campman, W. Walukiewicz, Engineering the electronic band structure for multiband solar cells, Physical Review Letters 106(2). doi: 10.1103/PhysRevLett.106.028701.10.1103/PhysRevLett.106.028701 ↗
20. Thermodynamic consistency of sub-bandgap absorbing solar cell proposals10.1109/16.944204 ↗
21. Photovoltaics: towards the intermediate band10.1038/nphoton.2011.22 ↗
22. Limiting efficiency of an intermediate band solar cell under a terrestrial spectrum10.1063/1.2907493 ↗
23. Influence of the overlap between the absorption coefficients on the efficiency of the intermediate band solar cell10.1109/TED.2004.828161 ↗
24. R. Strandberg, T. Reenaas, Initial theoretical study of solar cells with an intermediate band of non-zero width and a thermalized electron population, Progress in Photovoltaics: Research and Applications, 2011, in press, doi: 10.1002/pip.1155.10.1002/pip.1155 ↗
25. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
26. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
27. Accurate and simple analytic representation of the electron-gas correlation energy10.1103/PhysRevB.45.13244 ↗
28. Ferromagnetic compounds for high efficiency photovoltaic conversion: the case of AlP:Cr10.1103/PhysRevLett.102.227204 ↗
29. First-principles investigation of the assumptions underlying model-Hamiltonian approaches to ferromagnetism of 3d impurities in III–V semiconductors10.1103/PhysRevB.69.115211 ↗
30. vasp code, 〈http://cms.mpi.univie.ac.at/vasp〉 (Visited August 2011).
31. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
32. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
33. Optimal filling of the intermediate band in idealized intermediate band solar cells10.1109/TED.2011.2155659 ↗
34. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗