Highly near-infrared transparent GeO2-doped In2O3 electrodes for bulk heterojunction organic solar cells
Source abstract
Abstract
Abstract We report on the characteristics of GeO2-doped In2O3 (IGO) films for use as transparent electrodes in organic solar cells (OSCs). The electrical, optical, and structural properties of IGO electrodes were investigated as a function of RF power and post-annealing conditions. At optimized conditions, the IGO electrode exhibited a low sheet resistance of 14.0 Ω/square, a high optical transmittance of 86.9%, a root mean square roughness of 1.27 nm and a work function of 5.2 eV. In particular, the IGO film showed higher optical transmittance in the near-infrared region due to a lower free carrier concentration and higher mobility than conventional ITO electrodes. The higher Lewis acid strength of the Ge4+ (3.06) dopant, compared to that of a Sn4+ (1.62) dopant, led to higher mobility of the IGO films. In addition, we observed that the strongly oriented (222) grains in the IGO films enhanced carrier mobility and relaxation time. Furthermore, a bulk heterojunction OSC with the optimized IGO anode exhibited a good cell performance with a fill factor of 67.38%, a short circuit current of 8.438 mA/cm2, an open circuit voltage of 0.606 V, and a power conversion efficiency of 3.443%, which are comparable to OSCs with ITO anodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Advanced materials and processes for polymer solar cells devices10.1039/B913168J ↗
2. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
3. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
4. Stability of polymer solar cells10.1002/adma.201104187 ↗
5. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
6. Brabec · 2008
7. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
8. Organic tandem solar cells: a review10.1039/b817952b ↗
9. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
10. Near-infrared response photovoltaics devices based on novel narrow band gap small molecule and PCBM fabricated by solution processing10.1016/j.solmat.2007.05.023 ↗
11. Large-area organic solar cells with metal sub electrode on indium tin oxide anode10.1063/1.3419925 ↗
12. Dependence of electrical, optical, and structural properties on the thickness of IZTO thin films grown by linear facing target sputtering for organic solar cells10.1016/j.solmat.2010.05.056 ↗
13. Reduction of series resistance in organic photovoltaic using low sheet resistance of ITO electrode10.1149/1.3055339 ↗
14. Low resistance and high transparent amorphous IZTO electrode cosputtered by linear facing target sputtering for organic photovoltaics10.1149/1.3158052 ↗
15. Antonio Luque · 2003
16. Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer10.1063/1.3453445 ↗
17. Multilayer graphene films as transparent electrodes for organic photovoltaic devices10.1016/j.solmat.2011.09.031 ↗
18. Semitransparent organic photovoltaic cells with laminated top electrode10.1021/nl903892x ↗
19. Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells10.1016/j.solmat.2011.07.009 ↗
20. Efficiency enhancement of organic solar cells using transparent plasmonic Ag nanowire electrodes10.1002/adma.201001395 ↗
21. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
22. Ginley · 2010
23. Electronegativities of elements in valence states and their applications. 2. A scale for strengths of Lewis acids10.1021/ic00141a006 ↗
24. Correlations between the electronic properties of doped indium oxide ceramics and the nature of the doping element10.1016/0921-5107(92)90339-B ↗
25. Germanium and silicon‐doped indium‐oxide thin films prepared by radio‐frequency magnetron sputtering10.1063/1.111894 ↗
26. Properties of germanium-doped indium oxide thin films prepared by DC magnetron sputtering10.1143/JJAP.39.1849 ↗
27. Electronic properties of Sn- or Ge-doped In2O3 semiconductors10.1155/1993/82760 ↗
28. Streetment · 2006
29. Tin doped indium oxide thin films: electrical properties10.1063/1.367025 ↗
30. Effect of introducing H2O vapor on properties of RF sputter-grown ITO anode layer for OLEDs10.1149/1.2906134 ↗
31. Microstructural evolution during film growth10.1116/1.1601610 ↗
32. Room-temperature indium free Ga:ZnO/Ag/Ga:ZnO multilayer electrodes for organic solar cell application10.1149/1.3149537 ↗
33. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗