journal article·2015-08

Well-ordered nanoporous materials for low-temperature water phase changes and solar evaporative cooling

D. Karamanis, E. Kyritsi, S. Krimpalis

Publisher page

Abstract

Abstract The interaction of solar radiation with nanoporous composites with a high water vapor adsorption capacity compared to materials used in external building surfaces was investigated in a wind tunnel with adjustable environmental parameters. Prior to the tunnel experiments, all of the materials were characterized using various techniques, and their thermal and optical properties were determined. In cyclic experiments inside the tunnel, the maximum temperature in the nanoporous materials under simulated solar radiation was considerably lower than the corresponding temperature inside marble dust or soil. In addition, the temperature differences between the humid and non-humid nanoporous samples under simultaneous irradiation increased with increasing solar absorbance, which was primarily due to evaporative cooling. In addition, solar reflectance and emittance increased upon water vapor adsorption. Energy balance analysis revealed that the absorbed solar radiation was primarily transformed to heat desorption energy to compensate for the electrostatic attraction of water vapor to the negatively charged particle surfaces. A decrease in the released heat in the environment indicates the need for more sun- and hydrophilic urban surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. The urban heat island effect in a small Mediterranean city of high summer temperatures and cooling energy demands10.1016/j.solener.2013.04.016 ↗
2. Review of passive solar heating and cooling technologies10.1016/j.rser.2009.10.030 ↗
3. The influence of street canyons on the cooling loads of buildings and the performance of air conditioning systems10.1016/S0378-7788(00)00123-7 ↗
4. Cooling the cities – a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments10.1016/j.solener.2012.07.003 ↗
5. Assessing practical measures to reduce urban heat: green and cool roofs10.1016/j.buildenv.2013.08.021 ↗
6. Modeling impacts of roof reflectivity, integrated photovoltaic panels and green roof systems on sensible heat flux into the urban environment10.1016/j.buildenv.2011.06.012 ↗
7. Long-term performance of high-albedo roof coatings10.1016/S0378-7788(96)01005-5 ↗
8. Effect of ageing on solar spectral reflectance of roofing membranes: natural exposure in Roma and Milano and the impact on the energy needs of commercial buildings10.1016/j.enbuild.2014.08.008 ↗
9. Cool roof technology in London: an experimental and modelling study10.1016/j.enbuild.2011.07.011 ↗
10. Comparative assessment of various heat island mitigation measures10.1016/j.buildenv.2013.12.013 ↗
11. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
12. Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability10.1016/j.buildenv.2009.07.002 ↗
13. Capillary rise properties of porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former10.1016/j.jeurceramsoc.2009.03.012 ↗
14. Capillary rise properties of porous geopolymers prepared by an extrusion method using polylactic acid (PLA) fibers as the pore formers10.1016/j.jeurceramsoc.2010.10.035 ↗
15. Solar cooling with aluminium pillared clays10.1016/j.solmat.2011.04.007 ↗
16. Application of zeolitic materials prepared from fly ash to water vapor adsorption for solar cooling10.1016/j.apenergy.2011.12.078 ↗
17. Thermoresponsive polymer induced sweating surfaces as an efficient way to passively cool buildings10.1002/adma.201202574 ↗
18. Surface solar cooling through water vapor desorption from photo-responsive sepiolite nanocomposites10.1016/j.enconman.2012.01.035 ↗
19. Phase separation in confined systems10.1088/0034-4885/62/12/201 ↗
20. On the physical state of molecules in microporous solids10.1016/j.micromeso.2007.01.003 ↗
21. The performance of small-pore microporous aluminophosphates in low-temperature solar energy storage: the structure–property relationship10.1002/adfm.201102734 ↗
22. Capillary condensation of adsorbates in porous materials10.1016/j.cis.2011.08.003 ↗
23. Water adsorption–desorption isotherms of two-dimensional hexagonal mesoporous silica around freezing point10.1016/j.jcis.2011.10.002 ↗
24. International tables of the surface tension of water10.1063/1.555688 ↗
25. Deposition nucleation viewed as homogeneous or immersion freezing in pores and cavities10.5194/acp-14-2071-2014 ↗
26. Synthesis and characterization of hybrid MCM-41 materials for heavy metal adsorption10.1016/j.micromeso.2009.05.021 ↗
27. Dilute solution routes to various controllable morphologies of MCM-41 silica with a basic medium10.1021/cm990661z ↗
28. Analysis of water in food by near infrared spectroscopy10.1016/S0308-8146(02)00583-6 ↗
29. Iqbal · 1983 · 107
30. Weathering of roofing materials – an overview10.1016/j.conbuildmat.2006.10.015 ↗
31. Influence of soil water content on the thermal infrared emissivity of bare soils: implication for land surface temperature determination10.1029/2007JF000749 ↗