Hybrid electrohydrodynamic atomization of nanostructured silver top contact for inverted organic solar cells
Source abstract
Abstract
Abstract The present study is demonstrating the deposition of solution based nanostructured silver top electrode for inverted organic solar cells. The deposition of silver nanoparticles through hybrid electrohydrodynamic atomization (Hybrid-EHDA) is discussed in detail. The film thicknesses were varied with respect to spray times. The interface between the metal electrode and organic film was investigated using a focused ion beam analyzer. The sheet resistance of nanostructured silver film was reduced by increasing the film thickness. The lowest sheet resistance of silver film is ~0.07 Ω/sq with a film thickness of 2.6 µm. The power conversion efficiency of fabricated devices was found to be influenced by the sheet resistance of silver film. The maximum power conversion efficiency (~2.44%) was observed at 0.07 Ω/sq. Our results demonstrate that the Hybrid-EHDA will play a promising role in the fabrication of inverted organic solar cells using a solution based top electrode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Organic Electronics and Photovoltaics · Electrowetting and Microfluidic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
2. Multicrystalline silicon for solar cells: process development by numerical simulation10.1002/1521-4095(200112)13:23<1815::AID-ADMA1815>3.0.CO;2-T ↗
3. Silicon filaments in silicon oxide for next-generation photovoltaics10.1002/adma.201104578 ↗
4. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
5. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
6. Stability of polymer solar cells10.1002/adma.201104187 ↗
7. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
8. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
9. Conjugated polymer surfaces and interfaces: a mini-review and some new results10.1016/S0379-6779(96)03692-2 ↗
10. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
11. Transparent anodes for polymer photovoltaics: oxygen permeability of PEDOT10.1016/j.solmat.2006.11.006 ↗
12. Fully spray-coated inverted organic solar cells10.1016/j.solmat.2012.04.027 ↗
13. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
14. Characterization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) thin film deposited through electrohydrodynamic atomization technique10.1016/j.matlet.2012.05.127 ↗
15. Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics10.1016/j.solmat.2010.04.057 ↗
16. Model for the J–V characteristics of degraded polymer solar cells10.1063/1.4794356 ↗
17. Influence of crystallizable solvent on the morphology and performance of P3HT:PCBM bulk-heterojunction solar cells10.1016/j.solmat.2009.11.018 ↗
18. Electrodeposition of CuInSe2 absorber layers from pH buffered and non-buffered sulfate-based solutions10.1016/j.tsf.2007.07.142 ↗
19. Thin-film CIS alloy PV materials fabricated using non-vacuum, particles-based techniques10.1016/S0040-6090(00)01729-6 ↗
20. Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells10.1016/j.orgel.2009.03.006 ↗
21. Facile synthesis of silver nanoparticles useful for fabrication of high-conductivity elements for printed electronics10.1021/ja043425k ↗
22. A desktop electrohydrodynamic jet printing system10.1016/j.mechatronics.2010.05.004 ↗
23. Functional protein microarrays by electrohydrodynamic jet printing10.1021/ac302463p ↗
24. Fabrication of TiO2 thin film memristor device using Electrohydrodynamic inkjet printing10.1016/j.tsf.2012.03.003 ↗
25. Inverted organic solar cells with ZnO thin films prepared by sol–gel method10.1166/jno.2010.1079 ↗
26. Investigation on switching behavior of ZrO2 thin film for memory device applications10.1016/j.mssp.2012.12.019 ↗
27. Solution-processed polymer–silver nanowire top electrodes for inverted semi-transparent solar cells10.1016/j.orgel.2012.10.039 ↗
28. Structural and electrical properties of P3HT:PCBM/PEDOT:PSS thin films deposited through electrohydrodynamic atomization technique10.1016/j.matlet.2012.10.104 ↗
29. Solution-processed bulk heterojunction organic solar cells based on an oligothiophene derivative10.1063/1.3460911 ↗
30. Zinc oxide nanowire as an electron-extraction layer for broadband polymer photodetectors with an inverted device structure10.1021/jp303016f ↗
31. Electron and hole transport layers: their use in inverted bulk heterojunction polymer solar cells10.3390/electronics3010132 ↗
32. Improving the efficiency of ITO/nc-TiO2/CdS/ P3HT:PCBM/PEDOT:PSS/Ag inverted solar cells by sensitizing TiO2 nanocrystalline film with chemical bath-deposited CdS quantum dots10.1186/1556-276X-8-453 ↗
33. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
34. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
35. High efficiency double heterojunction polymer photovoltaic cells using highly ordered TiO2 nanotube arrays10.1063/1.2799257 ↗
36. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
37. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
38. Oxidation of silver electrodes induces transition from conventional to inverted photovoltaic characteristics in polymer solar cells10.1063/1.3257361 ↗