journal article·2011-08

Study of the Mo/CuInS2/ZnS system by TEM

J. Sandino, E. Romero, J.S. Oyola, G. Gordillo, H. Lichte

Publisher page

Abstract

Abstract This work presents results from a study carried out on the Mo/CuInS2/ZnS stacked layers, using high-resolution transmission electron microscopy (HRTEM). This system will be used later for the fabrication of solar cells with Mo/CuInS2/ZnS/TCO structure, where the layers conforming it will perform as an electrical contact, absorber layer and buffer layer, respectively. The layers of the Mo/CuInS2/ZnS system were deposited sequentially on soda lime glass substrates. The Mo film was deposited by DC magnetron sputtering, the CuInS2 (CIS) layer was grown by co-evaporation of precursors in a two-stage process and the ZnS was deposited by co-evaporation and by CBD (chemical bath deposition) using a solution containing zinc acetate, sodium citrate, ammonia and thiourea.The performed study provided significant information regarding crystalline structure, grain boundaries and defects visualization of each one of the layers as well as of the Mo/CuInS2 and CuInS2/ZnS interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. 19.9% efficient ZnO/CdS/CuInGaSe solar cells with 81.2% fill factor10.1002/pip.822 ↗
2. Efficient CuInS2 solar cells from a rapid thermal process (RTP)10.1016/S0927-0248(00)00276-2 ↗
3. L.L. Kazmerski, in: Technical Digest Proceedings of the 12th International Photovoltaic Science and Engineering Conference (PVSEC-12), Cheju, South-Korea, 2001, pp. 11–14.
4. A. Ennaoui, M. Bär, M. Rusu, R. Klenk, J. Klaer, T. kropp, R. Saez-Araos, H.W. Schock, M.C. Lux-Steiner, Highly efficient CuInS2 based solar cell devices with optimized Cd-free window structure, in: 21st European Photovoltaic Solar Energy Conference, Dresden, 2006, pp. 1835–1838.
5. Electrical and morphological properties of low resistivity Mo thin films prepared by magnetron sputtering10.1590/S0103-97332006000600049 ↗
6. J. Clavijo, E. Romero, J.S. Oyola, G. Gordillo, Effect of preparation conditions on the optoelectrical and structural properties of CuInS2 thin films grown by a two-step process, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition, Milano, Italy, 2007, pp. 2279–2282.
7. E. Romero, W. Vallejo, G. Gordillo, Comparative study of ZnS thin films deposited by CBD and coevaporation, in: Proceedings of the 33rd IEEE Photovoltaic Specialist Conference, San Diego, USA, 2008, paper no. 66–70.10.1109/PVSC.2008.4922880 ↗
8. Crystalline ZnS thin films by chemical bath deposition method and its characterization10.1016/j.tsf.2006.07.035 ↗
9. Formation and characterization of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗