Influence of cell edges on the performance of silicon heterojunction solar cells
Source abstract
Abstract
Full size silicon heterojunction solar cells reach conversion efficiencies above 25%. However, photoluminescence pictures of such cells (full or cut) reveal a significant recombination activity at the cell edges. Therefore, mitigating recombination at the edges can in principle represent an interesting path to unlock higher cell efficiencies. This challenge is all the more important for cells with a high perimeter/area ratio, as achieved through the cutting of full size cells. For such technologies, the edges resulting from cutting are cleaved while the remaining edges typically feature a gap where TCO is missing to avoid front to back short-circuit. In this paper, we specify the physical mechanisms involved in the edge-induced performance losses for SHJ cells. In light of these results, we provide guidelines for the mitigation of such losses at the full-size and cut cells scale for M6 to M12 sizes such as the reduction of the TCO-free region and the c-Si bulk resistivity. Having a closer look at cut cells, we calculate the cell performance as a function of its size (from half-to sixth-cell), the size of its mother cell (from M6 to M12) and the passivation quality of the cut-edges. Our results emphasize on the interest to develop suitable repassivation schemes for cut cells to improve or even surpass the efficiency of the mother cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. 24% silicon heterojunction solar cells on meyer burger's on mass production tools and how wafer material impacts cell parameters
2. Insights on cell edge defects impact and post-process repassivation for heterojunction
3. Challenges for efficient integration of SHJ based solar cells in shingle module configuration
4. Perimeter recombination in 25%-efficient IBC solar cells with passivating POLO contacts for both polarities10.1109/JPHOTOV.2017.2762592 ↗
5. The impact of surface damage region and edge recombination on the effective lifetime of silicon wafers at low illumination conditions10.1063/1.4913451 ↗
6. Modeling edge recombination in silicon solar cells10.1109/JPHOTOV.2017.2787020 ↗
7. Silvaco
8. Influence of edge recombinations on the performance of half-, shingled- and full silicon heterojunction solar cells
9. Understanding of the influence of localized surface defectivity properties on the performances of silicon heterojunction cells10.1002/pip.3330 ↗
10. Recent progress on the CEA-INES heterojunction solar cell pilot line
11. Silicon wafers for industrial n-type SHJ solar cells: bulk quality requirements, large-scale availability and guidelines for future developments10.1016/j.solmat.2021.111128 ↗
12. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
13. Dielectric surface passivation for silicon solar cells: a review
14. Low temperature post-process repassivation for heterojunction cut-cells
15. Post-separation processing for silicon heterojunction half solar cells with passivated edges10.1109/JPHOTOV.2021.3099732 ↗