journal article·2021-06Open access

Tribological behavior of ceramic-alloy bearing contacts in molten salt lubrication for concentrating solar power

Xin He, Rick Wang, Dino Sulejmanovic, Kevin R. Robb, James R. Keiser, Keith Oldinski, Jun Qu

Abstract

Abstract Molten salts are considered as candidate heat transfer fluids and thermal energy storage media for next generation concentrating solar power (CSP). A molten salt circulates inside the piping and heat exchanger and also functions as a lubricant for the sleeve bearings of the CSP pump. Wear- and corrosion-resistant high-temperature bearing materials are critical for the pump efficiency and durability. This study evaluated the tribological performance of candidate bearing materials in lubrication of a molten chloride salt mixture (20% NaCl + 40% MgCl2 + 40% KCl) at 750 °C in an inert argon gas (a simulative CSP pump environment). Six ceramic-alloy pairs were tested, zirconia and silicon nitride against Haynes 244, Hastelloy C276, and Tribaloy T900 alloy, and ranked by the friction coefficient and wear loss. Characterization of worn surfaces suggested the wear mechanism as a combination of abrasion, adhesion, and tribocorrosion. Results from this study provide fundamental insight for the development and selection of bearing materials for molten salt powered CSP pumps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Delameter · 1986
2. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
3. Molten chloride salts for next generation CSP plants: selection of promising chloride salts & study on corrosion of alloys in molten chloride salts10.1063/1.5117729 ↗
4. Mehos · 2017
5. Holcomb · 2013
6. Development of a high-temperature, long-shafted, molten-salt pump for power tower applications10.1115/1.1464126 ↗
7. Effect of oxide layers and near surface transformations on friction and wear during tool steel and boron steel interaction at high temperatures10.1016/j.wear.2015.02.040 ↗
8. The role of oxidation in the wear of alloys10.1016/S0301-679X(98)00008-5 ↗
9. Elevated-temperature tribology of metallic materials10.1016/j.triboint.2010.01.003 ↗
10. Tribological properties of spark-plasma-sintered Al2O3-SrSO4 self-lubricating nanocomposites at elevated temperatures10.1007/978-3-642-03653-8_132 ↗
11. Sulfate based coatings for use as high temperature lubricants10.1023/A:1019140530037 ↗
12. Solid lubricant materials for high temperatures-a review10.1016/0301-679X(82)90089-5 ↗
13. Calcium sulfate as a high temperature solid lubricant10.1016/S0043-1648(98)00167-7 ↗
14. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
15. Glass-lubricated hot extrusion of stainless steel10.1179/030716980803286793 ↗
16. Tribological properties of water glass lubricant for hot metalworking10.1080/10402000902778037 ↗
17. The validity of mathematical solutions for determining friction from the ring compression test10.1115/1.3451419 ↗
18. Del Rincon · 2020
19. Mayes · 2018
20. Potential scalability of a cost-effective purification method for MgCl2-Containing salts for next-generation concentrating solar power technologies10.1016/j.solmat.2020.110663 ↗
21. Thermophysical properties experimentally tested for NaCl-KCl-MgCl2 eutectic molten salt as a next-generation high-temperature heat transfer fluids in concentrated solar power systems10.1115/1.4049253 ↗
22. Hamrock · 1981