Manipulation of discrete porphyrin–fullerene nanopillar arrays regulated by the phase separated infiltration of polymer in ternary blended organic thin-films
Source abstract
Abstract
Abstract Fabrication of nanostructure in various typed solar cell is of great importance in terms of the improvement of charge carrier collection and junction area. Here, we report that well-aligned nanopillar arrays are spontaneously developed in the process of the spin coating when a polymer is added to specific porphyrin–fullerene complexes. The nanopillars embedded in the polymers are composed of donor–acceptor assembled systems, based on J-type aggregation of a low-molecular zinc porphyrin derivative and subsequent integration of pyridylated fullerene derivative with coordination and orientation. The diameter and the height of the nanopillars can be controlled by the side chain-length and the concentration of the polymer as well as drying time after the spin coating. Structural, optical, and electrical properties of the nanopillar are also investigated. Finally, improved power conversion efficiency in the porphyrin–fullerene nanopillar is experimentally observed compared to that of the planar thin film prepared under similar conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The effect of a mild thermal treatment on the performance of poly(3-alkylthiophene)/fullerene solar cells10.1002/1521-4095(20021203)14:23<1735::AID-ADMA1735>3.0.CO;2-O ↗
2. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
3. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells10.1063/1.2181635 ↗
4. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
5. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
6. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
7. Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites10.1088/0957-4484/15/9/035 ↗
8. The influence of the optoelectronic properties of poly(3-alkylthiophenes) on the device parameters in flexible polymer solar cells10.1016/j.orgel.2005.02.004 ↗
9. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
10. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
11. High efficiency polymer solar cells with vertically modulated nanoscale morphology10.1088/0957-4484/20/16/165202 ↗
12. Solution-processable polymer solar cells from a poly(3-hexylthiophene)/[6,6]-phenyl C[sub 61]-butyric acidmethyl ester concentration graded bilayers10.1063/1.3192360 ↗
13. Reappraising the need for bulk heterojunctions in polymer−fullerene photovoltaics: the role of carrier transport in all-solution-processed P3HT/PCBM bilayer solar cells10.1021/jp9050897 ↗
14. Nano-confinement induced chain alignment in ordered P3HT nanostructures defined by nanoimprint lithography10.1021/nn900831m ↗
15. Morphology of all-solution-processed “bilayer” organic solar cells10.1002/adma.201003545 ↗
16. Formation of nanopatterned polymer blends in photovoltaic devices10.1021/nl904098m ↗
17. Nanostructured interfaces in polymer solar cells10.1063/1.3458809 ↗
18. Porphyrin- and fullerene-based molecular photovoltaic devices10.1002/adfm.200305172 ↗
19. Charge separation in a novel artificial photosynthetic reaction center lives 380ms10.1021/ja004123v ↗
20. Comparison of reorganization energies for intra- and intermolecular electron transfer10.1002/1521-3757(20020703)114:13<2450::AID-ANGE2450>3.0.CO;2-R ↗
21. Photoinduced electron transfer in supramolecular systems for artificial photosynthesis10.1021/cr00011a005 ↗
22. Convergent synthesis and photophysics of [60]fullerene/porphyrin-based rotaxanes10.1021/ja039698h ↗
23. Probing the donor−acceptor proximity on the physicochemical properties of porphyrin−fullerene dyads: “tail-on” and “tail-off” binding approach10.1021/ja010356q ↗
24. Supramolecular interactions between fullerenes and porphyrins10.1021/ja028998g ↗
25. Selective supramolecular porphyrin/fullerene interactions10.1021/ja992165h ↗
26. Fullerene−porphyrin constructs10.1021/ar040168f ↗
27. Supramolecular fullerene–porphyrin chemistry. Fullerene complexation by metalated “jaws porphyrin” hosts10.1021/ja017555u ↗
28. Self-assembly of a n-electronic amphiphile consisting of a zinc porphyrin-fullerene dyad: formation of micro-vesicles with a high stability10.1039/B409228G ↗
29. Supramolecular composites of porphyrins and fullerenes organized by polypeptide structures as light harvesters10.1039/b706678c ↗
30. Soluble porphyrin donors for small molecule bulk heterojunction solar cells10.1039/c2jm33956k ↗
31. Highly efficient and switchable electron-transfer system realised by peptide-assisted J-type assembly of porphyrin10.1039/c0cc01190h ↗
32. Noncovalent one-to-one donor-acceptor assembled systems based on porphyrin molecular gels for unusually high electron-transfer efficiency10.1002/chem.201101043 ↗
33. Functional phase separation in polymer-monomer composite film: controlled induction of pyrene orientation10.1246/cl.130586 ↗
34. Molecular gelation-induced functional phase separation in polymer film for energy transfer spectral conversion10.1002/adfm.201304081 ↗
35. Complexation of pyrrolidinofullerenes and zinc-phthalocyanine in a bilayer organic solar cell structure10.1063/1.2146070 ↗
36. Phase separation and reactivity changes of phenyl ester substrate and imidazole catalyst in the dialkylammonium bilayer membrane10.1021/ja00357a018 ↗
37. Functional fluorocarbon micelles. Specific rate enhancement in the catalytic hydrolysis of phenyl esters due to selective binding of fluorocarbon and hydrocarbon substrates10.1021/ja00316a078 ↗
38. Effect of side chain length on molecular ordering and field-effect mobility in poly(3-alkylthiophene) transistors10.1016/j.orgel.2006.07.007 ↗
39. Efficiency limiting morphological factors of MDMO-PPV:PCBM plastic solar cells10.1016/j.tsf.2005.12.071 ↗
40. Nanoscale morphology of conjugated polymer/fullerene-based bulk- heterojunction solar cells10.1002/adfm.200305026 ↗
41. Effects of porphyrin composition on the activity and selectivity of the iron(III) porphyrin catalysts for the epoxidation of cyclooctene by hydrogen peroxide10.1016/j.molcata.2007.03.030 ↗
42. Effect of annealing solvent solubility on the performance of poly(3-hexylthiophene)/methanofullerene solar cells10.1021/jp9029562 ↗
43. Discriminating between bilayer and bulk heterojunction polymer: fullerene solar cells using the external quantum efficiency10.1021/am200755m ↗
44. Role of solvent trapping effects in determining the structure and morphology of ternary blend organic devices10.1021/ma802632y ↗
45. Molecular materials by self-assembly of porphyrins, phthalocyanines, and perylenes10.1002/adma.200502498 ↗
46. Porphyrin sponges: conservative of host structure in over 200 porphyrin-based lattice clathrates10.1021/ja00074a013 ↗
47. The effect of porphyrin inclusion on the spectral response of ternary P3HT:porphyrin:PCBM bulk heterojunction solar cells10.1016/j.solmat.2006.09.007 ↗
48. Porphyrin oriented self-assembled nanostructures for efficient exciton dissociation in high-performing organic photovoltaics10.1039/C3TA13107F ↗
49. The exciton model in molecular spectroscopy10.1351/pac196511030371 ↗
50. In situ x-ray study of drying-temperature influence on the structural evolution of bulk-heterojunction polymer-fullerene solar cells processed by doctor-blading10.1002/aenm.201100007 ↗
51. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
52. Control of the nanoscale crystallinity and phase separation in polymer solar cells10.1063/1.2891884 ↗
53. Fast-grown interpenetrating network in poly(3-hexylthiophene): methanofullerenes solar cells processed with additive10.1021/jp810798z ↗
54. Effect of trace solvent on the morphology of P3HT:PCBM bulk heterojunction solar cells10.1002/adfm.201002372 ↗
55. Organic ternary solar cells: a review10.1002/adma.201300623 ↗