Intense pulsed light in back end processing of solar cells with passivating contacts based on amorphous or polycrystalline silicon layers
Source abstract
Abstract
Abstract Intense pulsed light (IPL) is capable of entirely replacing thermal annealing (curing and contact formation) within back end processing of silicon solar cells with passivating contacts. In order to demonstrate this, full-size silicon heterojunction (SHJ) cells with IPL-processed screen-printed metal contacts are fabricated. The device with the highest conversion efficiency reaches 23.0%, which is confirmed by Fraunhofer ISE CalLab. On average, IPL-annealed SHJ cells outperform their thermally treated pendants by 0.3–0.4%abs, in particular due to higher open-circuit voltages and fill factors. To further exploit the potential of IPL, it is applied to tunnel oxide passivating contacts (TOPCon). 2 cm × 2 cm-sized p-type solar cells with TOPCon layers on both sides are fabricated. On the front they exhibit indium tin oxide (ITO) layers as well as screen-printed metal contacts which are either thermally or IPL-annealed. The trade-off between low contact resistivity at the TOPCon/ITO interface and high-quality surface passivation (open-circuit voltages of up to 709.4 mV) is balanced, which is a current challenge for the optimization of such devices. The IPL-processed cells’ series resistances do not differ significantly from those of thermally treated ones. Due to the pulse durations of several milliseconds only, IPL is very fast and offers a high throughput and, therefore, cost saving potential.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
3. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
4. Ines
5. Metallization and interconnection for silicon heterojunction solar cells and modules
6. The optical properties of metal nanoparticles: the influence of size, shape, and dielectric environment10.1021/jp026731y ↗
7. Photonic sintering of silver nanoparticles: comparison of experiment and theory
8. Broadcast photonic curing of metallic nanoparticle films
9. Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes10.1039/c2jm32977h ↗
10. Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices10.1039/C4TC01820F ↗
11. Flash light sintering of nickel nanoparticles for printed electronics10.1016/j.tsf.2013.11.075 ↗
12. Mechanisms of photonic curing™: processing high temperature films on low temperature substrates
13. Intense pulsed light processing for photovoltaic manufacturing10.1016/j.solmat.2017.09.010 ↗
14. Multi-pulsed flash light sintering of copper nanoparticle pastes on silicon wafer for highly-conductive copper electrodes in crystalline silicon solar cells10.1016/j.apsusc.2018.08.098 ↗
15. Kim · 2019
16. Applicability of photonic sintering and autoclaving as alternative contact formation methods for silicon solar cells with passivating contacts
17. Intense pulsed light meets the metallization of silicon heterojunction solar cells
18. Newly developed Ag coated Cu paste for Si hetero-junction solar cell
19. Low-resistivity screen-printed contacts on indium tin oxide layers for silicon solar cells with passivating contacts10.1109/JPHOTOV.2018.2859768 ↗
20. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
21. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
22. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
23. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
24. Implementing transparent conducting oxides by DC sputtering on ultrathin SiOx/poly-Si passivating contacts10.1016/j.solmat.2019.109960 ↗
25. Schroder · 2006
26. Contact resistance on diffused resistors
27. Current crowding on metal contacts to planar devices10.1109/T-ED.1969.16904 ↗
28. GridTOUCH: innovative solution for accurate IV measurement of busbarless cells in production and laboratory environments
29. Two image processing tools to analyse alkaline texture and contact finger geometry in microscope images
30. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
31. A quasi-steady-state open-circuit voltage method for solar cell characterization
32. Shading losses of solar‐cell metal grids10.1063/1.350580 ↗
33. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
34. Light-induced performance increase of silicon heterojunction solar cells10.1063/1.4964835 ↗
35. Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking10.1016/j.solmat.2017.06.023 ↗
36. Reversible conductivity changes in discharge‐produced amorphous Si
37. Annealing of silicon heterojunction solar cells: interplay of solar cell and indium tin oxide properties10.1109/JPHOTOV.2019.2924389 ↗
38. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
39. Integrating transparent conductive oxides to improve the infrared response of silicon solar cells with passivating rear contacts
40. Exact analytical solutions of the parameters of real solar cells using Lambert W-function10.1016/j.solmat.2003.11.018 ↗
41. Hard x-ray photoelectron spectroscopy study of the buried Si/ZnO thin-film solar cell interface: direct evidence for the formation of Si–O at the expense of Zn-O bonds10.1063/1.3644084 ↗