Fine front side metallisation by stretching the dispensed silver paste filament with graphite nanofibres
Source abstract
Abstract
Abstract The miniaturization of finger electrodes is an area of active research in the crystalline silicon solar cell industry, and diverse trials have been conducted with various printing techniques, including stencil, laser, aerosol jet, inkjet, electrohydrodynamic jet, and dispensing printing. Among these techniques, dispensing printing is regarded as promising due to its superior capability to construct fine finger electrodes with a high aspect ratio and homogeneity by single-pass printing without direct contact with the solar cell wafer. However, its requirements of a small nozzle, short stand-off distance between the nozzle and the solar cell, and specially formulated highly viscous silver paste with a high yield stress raise the issues of nozzle clogging, nozzle breakage by colliding with the solar cell, and the challenges of developing a dispensing printer that can accommodate high pneumatic pressures. In this study, a robust resolution of the aforementioned issues is proposed using graphite nanofibres. The small addition of graphite nanofibres to conventional silver paste greatly enhances the elongational property of silver paste. By stretching the silver paste filament with the enhanced elongational property, the diameter of the silver paste filament is reduced and a finger width of 47.7 µm was achieved, which is finer by 21.4 µm than the finger width achieved using paste without the graphite nanofibres. Moreover, the stable construction of finger electrodes is enabled with graphite nanofibres at a stand-off distance as far as 1 mm and a printing speed as fast as 100 mm/s. The resulting cell efficiency with graphite nanofibres is higher by +0.22%p (average) and +0.30%p (median) than those obtained without graphite nanofibres.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Nanomaterials and Printing Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. SEMI PV Group, International Technology Roadmap for Photovoltaic (ITRPV.net), Results 2015, 2016. 〈http://www.itrpv.net〉 (last Accessed on the 02 November 2016).
2. Analysis of fine-line screen and stencil-printed metal contacts for silicon wafer solar cells10.1109/JPHOTOV.2014.2388073 ↗
3. Impact of texture roughness on the front-side metallization of stencil-printed silicon solar cells10.1109/JPHOTOV.2015.2416916 ↗
4. Fine line double printing and advanced process control for cell manufacturing10.1016/j.egypro.2015.03.295 ↗
5. Silicon solar cells based on all-laser-transferred contacts10.1002/pip.2395 ↗
6. Metal aerosol jet printing for solar cell metallization10.1002/pip.759 ↗
7. Fine line printed silicon solar cells exceeding 20% efficiency10.1002/pip.850 ↗
8. Fabrication of an inkjet-printed seed pattern with silver nanoparticulate ink on a textured silicon solar cell wafer10.1088/0960-1317/20/12/125003 ↗
9. Towards ink-jet printed fine line front side metallization of crystalline silicon solar cells10.1016/j.solmat.2010.12.031 ↗
10. Bimodally dispersed silver paste for the metallization of a crystalline silicon solar cell using electrohydrodynamic jet printing10.1016/j.solmat.2015.01.008 ↗
11. Process development for a high-throughput fine line metallization approach based on dispensing technology10.1016/j.egypro.2014.02.001 ↗
12. Fine line metallization by coextrusion technology for next generation solar cells10.1016/j.solmat.2014.06.006 ↗
13. Electrostatic-force-assisted dispensing printing to construct high-aspect-ratio of 0.79 electrodes on a textured surface with improved adhesion and contact resistivity10.1038/srep16704 ↗
14. Progress in fine-line metallization by co-extrusion printing on cast monosilicon PERC solar cells10.1016/j.solmat.2015.05.023 ↗
15. Dispensing technology on the route to an industrial metallization process10.1016/j.egypro.2015.03.297 ↗
16. 3D-pirnting Ag-line of front-electrodes with optimized size and interface to enhance performance of Si solar cells10.1039/C6RA08985B ↗
17. The effect of temperature gradients on the sharkskin surface instability in polymer extrusion through a slit die10.1007/s00397-006-0086-2 ↗
18. Electrospun composite nanofiber yarns containing oriented graphene nanoribbons10.1021/am401161b ↗
19. Hybrid silk fibers dry-spun from regenerated silk fibroin/graphene oxide aqueous solutions10.1021/acsami.5b11245 ↗
20. Hierarchical electrospun and cooperatively assembled nanoporous Ni/NiO/MnOx/carbon nanofiber composites for lithium ion battery anodes10.1021/acsami.6b05592 ↗
21. Supercapacitor Electrodes based on high-purity electrospun polyaniline and polyaniline-carbon nanotube nanofibers10.1021/acsami.6b03463 ↗
22. Pochiraju · 2011
23. Shear and extensional rheology of carbon nanofiber suspensions10.1007/s00397-005-0436-5 ↗
24. Carbon nanofiber aerogels for emergent cleanup of oil spillage and chemical leakage under harsh conditions10.1038/srep04079 ↗
25. Hierarchically mesoporous CuO/carbon nanofiber coaxial shell-core nanowires for lithium ion batteries10.1038/srep09754 ↗