journal article·2016-05

Improved evaluation of saturation currents and bulk lifetime in industrial Si solar cells by the quasi steady state photoconductance decay method

Binhui Liu, Yifeng Chen, Yang Yang, Daming Chen, Zhiqiang Feng, Pietro P. Altermatt, Pierre Verlinden, Hui Shen

Publisher page

Abstract

Abstract For understanding and improving the performance of industrial Si solar cells, it helps to quantify the losses in the various device parts very precisely, because this enhances the predictive power of roadmaps deduced from such analysis. We show how the precision of commonly applied methods for measuring the saturation current density, J0, can be noticeably improved. Firstly, two methods are compared for determining the optical properties of the samples specifically made for lifetime measurements. Secondly, it is evaluated, which excess carrier density level is best to choose for extracting J0 of the various device regions. Thirdly, the bulk lifetime is extracted by a combination of measurements and modeling of the surface passivation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, 1985, pp. 578–583.
2. Contactless determination of current–voltage characteristics and minority carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
3. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
4. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
5. Lifetimes exceeding 1ms in 1-Ω cm boron-doped Cz-silicon10.1016/j.solmat.2014.06.011 ↗
6. Evaluating the aluminum-alloyed p+-layer of silicon solar cells by emitter saturation current density and optical microspectroscopy measurements10.1109/TED.2010.2093145 ↗
7. Alloying from screen-printed aluminum pastes, containing boron additives10.1109/JPHOTOV.2012.2217113 ↗
8. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
9. User manual of the WCT-120 photoconductance lifetime tester and optional Suns-Voc stage, Sinton Consulting, Boulder, CO, 2015.
10. Optical modeling of alkaline saw-damage-etched rear surfaces of monocrystalline silicon solar cells
11. T. Ohrdes, R. Peibst, N.P. Harder, P.P. Altermatt, R. Brendel, Characterization of the emitter collection efficiency by contactless photoconductance measurements, in: Proceedings of the 23rd Photovoltaic Science and Engineering Conference (PVSEC), Taipei, Taiwan, 2013, pp. 1216–1219.
12. Lifetime measurements by photoconductance techniques in wafers immersed in a passivating liquid10.1149/1.1354620 ↗
13. Test method for contactless excess-charge-carrier recombination lifetime measurement in silicon wafers, ingots, and bricks using an eddy-current sensor, SEMI PV13-0714 report, SEMI (Semiconductor equipment and Materials international, San Jose, CA), 2011.
14. B. Min, A. Dastgheib-Shirazi, P.P. Altermatt, H. Kurz, Accurate determination of the emitter saturation current density for industrial P-diffused emitters, in: Proceedings of the 29th EU Photovoltaic Energy Conference, 2014, pp. 463–466.
15. Shockley · 1953
16. Markowich · 1990
17. Ideal solar cell equation in the presence of photon recycling10.1063/1.4900997 ↗
18. Departures from the principle of superposition in silicon solar cells10.1063/1.357902 ↗
19. A. Rothwarf, The superposition principle for current in solar cells, in: Proceedings of the 13th IEEE PV Specialists Conference, 1978, pp. 1312–1317.
20. Fonash · 2010 · 73
21. Misconceptions and misnomers in solar cells
22. Improved diffused-region recombination-current pre-factor analysis10.1016/j.egypro.2014.08.100 ↗
23. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
24. Comparison of emitter saturation current densities determined by injection-dependent lifetime spectroscopy in high and low injection regimes
25. On the determination of the emitter saturation current density from lifetime measurements of silicon devices
26. A.L. Blum, J.S. Swirhun, R.A. Sinton, A. Kimmerle, An updated analysis to the WCT-120 QSSPC measurement system using advanced device physics, In: Proceedings of the 28th EU Photovoltaic Energy Conference, 2013, pp. 1521–1523.
27. Uncertainty in photoconductance measurements of the emitter saturation current
28. Effect of boron concentration on recombination at the p-Si–Al2O3 interface10.1063/1.4867643 ↗
29. Interface recombination parameters of atomic-layer-deposited Al2O3 on crystalline silicon10.1063/1.3700241 ↗
30. Recombination at the interface between silicon and stoichiometric plasma silicon nitride10.1088/0268-1242/17/2/314 ↗
31. Interpretation of recombination at c-Si/SiNx interfaces by surface damage10.1063/1.3437643 ↗
32. The impact of surface damage region and edge recombination on the effective lifetime of silicon wafers at low illumination conditions10.1063/1.4913451 ↗
33. The effect of sample edge recombination on the averaged injection-dependent carrier lifetime in silicon10.1063/1.3691230 ↗
34. Aberle · 2001
35. M. Schöfthaler, R. Brendel, G. Langguth, J.H. Werner, High-quality surface passivation by corona-charged oxides for semiconductor surface characterization, In: Proceedings of the 1st World Conference on PV Energy Conversion, Waikaloa, HI, 1994, pp. 1509–1512.10.1109/WCPEC.1994.520237 ↗
36. Accurate method for the determination of bulk minority-carrier lifetimes of mono- and multicrystalline silicon wafers10.1063/1.364403 ↗
37. Unusually low surface-recombination velocity on silicon and germanium surfaces10.1103/PhysRevLett.57.249 ↗
38. H. Kampwerth, S. Rein, S.W. Glunz, Pure experimental determination of surface recombination properties with high reliability, In: Proceedings of the 3rd World Conference on PV Energy Conversion, Osaka, Japan, 2003, pp. 1069–1107.
39. Very low bulk and surface recombination in oxidized silicon wafers10.1088/0268-1242/17/1/306 ↗
40. Effective surface passivation of crystalline silicon using ultrathin Al2O3 films and Al2O3/SiNx stacks10.1002/pssr.200903272 ↗
41. High-efficiency c-Si solar cells passivated with ALD and PECVD auminum oxide10.1109/LED.2010.2049190 ↗
42. Symmetrical Al2O3-based passivation layers for p- and n-type silicon10.1016/j.solmat.2014.06.005 ↗
43. Models for numerical device simulations of crystallinesilicon solar cells – a review10.1007/s10825-011-0367-6 ↗
44. Thermal stability of silicon surface passivation by APCVD Al2O310.1016/j.solmat.2013.05.048 ↗
45. Excellent c-Si surface passivation by thermal atomic layer deposited aluminum oxide after industrial firing activation10.1088/0022-3727/46/38/385102 ↗
46. Impact of the firing step on Al2O3 passivation on p-type Czochralski Si wafers: electrical and chemical approaches10.7567/JJAP.54.08KD21 ↗
47. Properties of the c-Si/Al2O3 interface of ultrathin atomic layer deposited Al2O3 layers capped by SiNx for c-Si surface passivation10.1063/1.4903483 ↗
48. Modeling recombination at the Si–Al2O3 interface
49. Fundamental boron-oxygen-related carrier lifetime limit in mono- and multicrystalline silicon
50. Electronic properties of light-induced recombination centers in boron-doped Czochralski silicon10.1063/1.371186 ↗
51. Electronic properties of the metastable defect in boron-doped Czochralski silicon: unambiguous determination by advanced lifetime spectroscopy10.1063/1.1544431 ↗
52. High-efficiency c-Si solar cells passivated with ALD and PECVD aluminum oxide10.1109/LED.2010.2049190 ↗
53. Surface passivation and simulated performance of solar cells with Al2O3/SiNx rear dielectric stacks
54. Emitter current suppression in a high-low-junction emitter solar cell using an oxide-charge-induced electron accumulation layer10.1063/1.90295 ↗
55. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
56. Heavily doped Si:P emitters of crystalline Si solar cells: recombination due to phosphorus precipitation10.1002/pssr.201409138 ↗
57. Numerical modeling of highly doped Si:P emitters based of Fermi-Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
58. Contact formation and recombination at silicon solar cell base contacts10.1109/TED.2011.2161089 ↗
59. Dynamic infrared lifetime mapping for the measurement of the saturation current density of highly doped regions in silicon
60. A method for imaging the emitter saturation current with lateral resolution
61. Reverse saturation current density imaging of highly doped regions in silicon employing photoluminescence measurements
62. Imaging of the relative saturation current density and sheet resistance of laser doped regions via photoluminescence10.1063/1.4817525 ↗
63. Emitter saturation current densities determined by selfconsistent calibration: impact of laterally non-uniform lifetime distribution on calibration accuracy10.1016/j.egypro.2013.07.257 ↗
64. High resolution saturation current density imaging at grain boundaries by lock-in thermography10.1016/j.solmat.2012.05.011 ↗
65. Determination of metal contact recombination parameters for silicon wafer solar cells by photoluminescence imaging10.1016/j.solener.2015.05.010 ↗
66. H. Haverkamp, A. Dastgheib-Shirazi, B. Raabe, F. Book, G. Hahn, Minimizing the electrical losses on the front side: development of a selective emitter process from a single diffusion, In: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008.10.1109/PVSC.2008.4922443 ↗
67. Variations of box plots10.1080/00031305.1978.10479236 ↗
68. R. Bock, P.P. Altermatt, J. Schmidt, Accurate extraction of doping profiles from electrochemical capacitance voltage measurements, In: Proceedings of the 23rd EU PV Solar Energy Conference, Valencia, Spain, 2008, pp. 1510–1513.
69. Effective passivation of highly aluminum-doped p-type silicon surfaces using amorphous silicon10.1063/1.2784193 ↗
70. Adapted parameterization of incomplete ionization in aluminum-doped silicon and impact on numerical device simulation10.1063/1.4913255 ↗
71. Alloying from screen-printed aluminum pastes containing roron additives
72. Incomplete ionization of aluminum in silicon and its effect on accurate determination of doping profiles10.1063/1.4833242 ↗