journal article·2006-11

Large-area metallisation wrap through solar cells using electroless plating

Holger Knauss, Barbara Terheiden, Peter Fath

Solar Energy Materials and Solar Cells· Volume 90· Issue 18-19
Publisher page

Abstract

Abstract In this publication we present a realisation of a large-area metallisation wrap through (MWT) back-contact-solar cell with electroless-plated contacts. The MWT cell is a very promising back-contact solar-cell concept since the additional effort required to process MWT instead of conventional cells is limited to the formation of a small number of holes. In addition, the concept can easily be applied to very large area cells. We introduce a 9.8 cm×9.8 cm MWT solar cell, which reaches an efficiency of 16.1%. Up to this point cell performance is limited by local shunting, which results from non-optimal nickel sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. J. M. Gee, et al., Simplified module assembly using back-contact crystalline silicon solar cells, in: Proceedings of the 26th PVSC, 1997, pp. 1085–1088.10.1109/PVSC.1997.654276 ↗
2. W. Jooss, et al., Large-area multicristalline buried contact solar cells with bulk passivation and an efficiency of 17.5%, in: Proceedings of the 29th IEEE PVSC, New Orleans 2002, pp. 202–205.10.1109/PVSC.2002.1190491 ↗
3. W. Jooss, et al., 17% back-contact buried-contact cells, in: Proceedings of the 16th EC PVSEC, Glasgow, 2000, pp. 1224–1227.
4. E. Van Kerschaver, et al., Screen-printed metallisation wrap through solar cells, in: Proceedings of the 16th EC PVSEC, Glasgow, 2000, pp. 1515–1520.