Optimization of front-contact laser scribing for thin-film silicon solar modules
Source abstract
Abstract
Abstract The minimization of area losses for the integrated series connection of thin-film silicon solar modules is investigated for the front-contact separation process (P1). Sputtered ZnO:Al and commercially available SnO 2 :F front-contact TCO material on glass substrates were used for laser ablation processing. Problems and limits of width reduction were identified for processing wavelengths of 355 nm, 532 nm, and 1064 nm. Minimal scribe widths of 10 μ m were achieved with sufficiently high process stability. Material modifications near the scribe edge and their impact on the cell performance were characterized. Electrical properties of the TCO material after P1 processing were investigated with conductive Atomic Force Microscopy. Surface morphology analysis with Scanning Electron Microscopy showed redeposition of ablated material in vicinity of the scribe. The influence on the solar cell current generation was evaluated qualitatively with Laser Beam Induced Current measurements. Both material systems were characterized with and without subsequent wet-chemical cleaning/etching treatment after laser processing. With treatment, solar cell deterioration near the scribe edge was greatly reduced implying that material modifications originate from debris surface redeposition rather than heat-affected zone formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Laser patterning method for integrated type a-Si solar cell submodules10.1143/JJAP.25.1936 ↗
2. High speed laser processing for monolithical series connection of silicon thin-film modules10.1002/pip.792 ↗
3. Y. Gupta, H. Liers, S. Woods, S. Young, R. Deblasio, L. Mrig, Optimization of a-Si solar cell current collection, in: 16th Photovoltaic Specialists Conference, 1982, pp. 1092–1101.
4. Laser scribing of polycrystalline thin films10.1016/S0143-8166(00)00061-0 ↗
5. Laser processing of thin films for photovoltaic applications10.2961/jlmn.2010.03.0013 ↗
6. Direct ablation of ZnO with UV and IR laser for thin film solar modules
7. Nanosecond laser ablation processes in aluminum-doped zinc-oxide for photovoltaic devices10.1016/j.apsusc.2011.10.083 ↗
8. Characterization of direct- and back-scribing laser patterning of SnO2:F for a-Si:H PV module fabrication10.1016/j.apsusc.2013.01.164 ↗
9. T.-W. Kim, H.-J. Pahk, H.K. Park, D.J. Hwang, C.P. Grigoropoulos, Comparison of multilayer laser scribing of thin film solar cells with femto, pico, and nanosecond pulse durations, in: Proceedings of SPIE 7409 on Thin Film Solar Technology, 2009, pp. 74090A–74090A-10, http://dx.doi.org/10.1117/12.826458, URL: 〈http://dx.doi.org/10.1117/12.826458〉.10.1117/12.826458 ↗
10. M. Berginski, J. Huepkes, M. Schulte, G. Schoepe, H. Stiebig, B. Rech M. Wuttig, The effect of front ZnO: Al surface texture and optical transparency on efficient light trapping in silicon thin-film solar cells, J. Appl. Phys. 101 (7) 2007, 074903-074903-11, 10.1063/1.2715554, URL: 〈http://link.aip.org/link/JAPIAU/v101/i7/p074903/s1&Agg=doi〉.10.1063/1.2715554 ↗
11. Texture morphology of SnO2:F films and cell reflectance10.1143/JJAP.27.2053 ↗
12. Novel etching method on high rate ZnO:Al thin films reactively sputtered from dual tube metallic targets for silicon-based solar cells10.1016/j.solmat.2010.11.033 ↗
13. Application of scanning probe microscopy to the characterization and fabrication of hybrid nanomaterials10.1002/jemt.20100 ↗
14. Degradation studies of transparent conducting oxide10.1016/j.solmat.2004.07.009 ↗
15. B. Rezek, C.E. Nebel M. Stutzmann, Laser beam induced currents in polycrystalline silicon thin films prepared by interference laser crystallization, J. Appl. Phys. 91 (7) 2002, 4220-4228, 10.1063/1.1458058, URL: 〈http://link.aip.org/link/JAPIAU/v91/i7/p422/s1&Agg=doi〉10.1063/1.1458058 ↗
16. Simple technique for measurements of pulsed Gaussian-beam spot sizes10.1364/OL.7.000196 ↗
17. Ultrashort-pulse laser ablation of indium phosphide in air10.1007/s003390000596 ↗
18. B. Frei, S. Schneeberger, R. Witte, Innovative laser based solar cell scribing, in: Proceedings of SPIE 7920 on Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI, 2011, pp. 792011–792011–13. http://dx.doi.org/10.1117/12.877060, URL: 〈http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=719981〉10.1117/12.877060 ↗
19. Study of the refractive index change in a-Si:H thin films patterned by 532nm laser radiation for photovoltaic applications10.1016/j.tsf.2010.04.016 ↗
20. Heise, M. Domke, J. Konrad, S. Sarrach, J. Sotrop, H. P. Huber, Laser lift-off initiated by direct induced ablation of different metal thin films with ultra-short laser pulses, J. Phys. D: Appl. Phys. 45 (31) (2012) 315303-315303-8. 10.1088/0022-3727/45/31/315303. URL 〈http://stacks.iop.org/0022-3727/45/i=31/a=315303?key=crossref.faee5134451921c9dbf1ec420c893282〉10.1088/0022-3727/45/31/315303 ↗
21. I. Weaver, C. L. S. Lewis, Polar distribution of ablated atomic material during the pulsed laser deposition of Cu in vacuum: Dependence on focused laser spot size and powerdensity, J. Appl. Phys. 79 (9) (1996) 7216-7222. 10.1063/1.361437. URL http://link.aip.org/link/JAPIAU/v79/i9/p7216/s1&Agg=doi10.1063/1.361437 ↗
22. An analytical model for three-dimensional laser plume expansion into vacuum in hydrodynamic regime10.1016/0169-4332(95)00373-8 ↗