A round robin study of polymer solar cells and small modules across China
Source abstract
Abstract
A round robin study across 15 laboratories in China was carried out using single junction devices with an active area of 1 cm(2) and differently sized small module with an active area of 20 and 24 cm(2) respectively. The devices represented the state of the art in terms of processing as they did not employ indium or vacuum and were prepared using only printing and coating techniques on flexible substrates. The devices were studied in their flexible form and thus approach the vision of what the polymer solar cell is. The main purpose of the work was to establish and chart geographic and cultural differences in what constitutes a competent IV-characterization procedure and also to establish the spread in measured data across the globe. The main finding is that efficiency data deviated up to 30% from the mean while an overall relative standard deviation of 12% was observed. Collating this spread with previous findings points toward a seemingly region-independent i.e. global observation of the uncertainty in the /Vcharacterization of a polymer solar cell. Finally, we highlight what might be done to improve the accuracy of the reported data. (C) 2013 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Polymer: fullerene bulk heterojunction solar cells10.1016/S1369-7021(11)70210-3 ↗
2. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
3. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
4. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
5. Heliatek 12% Efficiency record: 〈www.heliatek.com〉, (n.d.).
6. Roll-to-roll inkjet printing and photonic sintering of electrodes for ito free polymer solar cell modules and facile product integration10.1002/aenm.201200520 ↗
7. It is all in the pattern-high-efficiency power extraction from polymer solar cells through high-voltage serial connection
8. Fast inline roll-to-roll printing for indium–tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
9. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
10. P3HT:PCBM, Best Seller in polymer photovoltaic research10.1002/adma.201100792 ↗
11. High throughput testing platform for organic Solar Cells10.1002/pip.836 ↗
12. Thermocleavable materials for polymer solar cells with high open circuit voltage-a comparative study10.1021/am900518r ↗
13. Accurate characterization of OPVs: device masking and different solar simulators10.1016/j.solmat.2012.11.020 ↗
14. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
15. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
16. Double and triple junction polymer solar cells processed from solution10.1063/1.2719668 ↗
17. Round-robin studies as a method for testing and validating high-efficiency ito-free polymer solar cells based on roll-to-roll-coated highly conductive and transparent flexible substrates10.1002/aenm.201200079 ↗
18. Results of the 1984/1985 international round robin calibration summit working group on technology, growth and employment
19. Metzdorf · 1990
20. T.R. Bets, R. Gottschalg, D.G. Infield, W. Kolodenny, M. Prorok, T. Zdanowicz, N. van der Borg, H. de Moor, G. Friesen, A. Guerin de Montgareuil, W. Herrmann, Round robin comparison of European outdoor measurement systems, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference (2006) pp. 2447–2451.
21. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
22. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
23. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
24. Reporting solar cell efficiencies in10.1016/j.solmat.2008.01.003 ↗