journal article·2021-06Open access

Solar selective reflector materials: Another option for enhancing the efficiency of the high-temperature solar receivers/reactors

Wujun Wang, Wangzhong Mu, Fei Ye, Silvia Trevisan, Joydeep Dutta, Björn Laumert

Abstract

The cavity wall is an important part of a cavity receiver in determining the receiver efficiency. Using solar selective reflector (SSR) materials with low solar absorptivity and high thermal emissivity for the cavity wall design is one efficient way to improve the receiver efficiency. In this work, we present a systematic study of the optical and high-temperature stability performances of six different SSR materials: one refractory ceramic fiber based substrate material (Fiberfrax 140) and five metallic oxide coatings which are prepared by mixing metallic oxide powders of alumina, magnesium oxide and titanium dioxide with commercial inorganic adhesives. The thermal stability was studied by heating up and keeping the six candidate materials in atmospheric conditions at a temperature of 1250 °C for 200 h. The spectrum of hemispherical reflectance in the spectrum band 0.25–25 μm was measured for analyzing the optical performance of the candidate materials. The obtained results show that all the six materials studied have good solar selective reflection characteristics, i.e, low solar absorptivity and relatively high thermal emissivity. Especially, the alumina coated substrate material shows excellent performances both for thermal stability and solar selective reflection. The solar reflectivity can reach 94.6%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Solar thermal technologies as a bridge from fossil fuels to renewables10.1038/nclimate2717 ↗
2. Concentrating solar power: still small but learning fast10.1038/nenergy.2017.95 ↗
3. Concentrating solar power technology
4. Review and future perspective of central receiver design and performance
5. Mehos
6. Concentrating solar thermal power and thermochemical fuels
7. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
8. Advanced power cycles for concentrated solar power10.1016/j.solener.2017.04.054 ↗
9. Heat transfer analysis of a novel pressurized air receiver for concentrated solar power via combined cycles
10. An inverse design method for a cavity receiver used in solar dish Brayton system10.1016/j.solener.2014.10.019 ↗
11. A theoretical heat transfer analysis of different indirectly-irradiated receiver designs for high-temperature concentrating solar power applications, Renew
12. The effect of the cooling nozzle arrangement to the thermal performance of a solar impinging receiver, Sol
13. Solugas – comprehensive analysis of the solar hybrid Brayton plant10.1016/j.solener.2016.06.020 ↗
14. Modular design and experimental testing of a 50 kWth pressurized-air solar receiver for gas turbines, J. Sol. Energy Eng
15. Selection of high temperature materials for concentrated solar power systems: property maps and experiments10.1016/j.solener.2014.09.050 ↗
16. Dish-Stirling systems: an overview of development and status
17. Advancing tube receiver performance by using corrugated tubes10.1016/j.egypro.2015.03.065 ↗
18. Effect of cavity surface material on the concentrated solar flux distribution for an impinging receiver10.1016/j.solmat.2016.12.008 ↗
19. Solar-thermal power generation10.1615/AnnualRevHeatTransfer.2012004925 ↗
20. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
21. Heat transfer in a solar cavity receiver: design considerations, Numer. Heat Transf
22. Born · 1980
23. Modest · 2003
24. Absorption to reflection transition in selective solar coatings10.1364/OE.20.00A554 ↗
25. Review of mid- to high- temperature solar selective absorber materials
26. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
27. A review of cermet-based spectrally selective solar absorbers, Energy Environ. Sci
28. Development of insulation for high flux density receivers10.1016/j.egypro.2015.03.043 ↗
29. Experimental and numerical performance analyses of Dish-Stirling cavity receivers: radiative property study and design10.1016/j.energy.2018.12.033 ↗
30. Solarthermal processing: a review
31. Thermal radiative properties: nonmetallic solids
32. Incropera · 2007
33. Duffie · 2013
34. Proposed reference irradiance spectra for solar energy systems testing10.1016/S0038-092X(03)00005-7 ↗