Hematite photoelectrodes grown on porous CuO–Sb2O5–SnO2 ceramics for photoelectrochemical water splitting
Source abstract
Abstract
Abstract Photoelectrodes capable of cost-effective hydrogen production on a large scale, via photoelectrochemical water splitting under solar light, could offer an elegant solution to many current problems of humankind caused by over-reliance on fossil fuels and the resulting environmental pollution. The search and design of low-cost photoelectrode materials and substrates for practical applications are required. In this work, unmodified hematite photoanodes grown by metal-organic chemical vapor deposition (MO-CVD) onto CuO–Sb2O5–SnO2 ceramic substrates are reported. The deposition time of hematite precursor varied between 10 min, 60 min, and 90 min. The photoanode grown for 60 min exhibits the highest photocurrent density recorded at 1.23 V vs RHE (reversible hydrogen electrode): 4.79 mA/cm2 under blue light of Thorlabs LED M455L2 (455 nm), 0.41 mA/cm2 under the radiation of the real sun in Mexico, and 0.38 mA/cm2 under AM1.5G solar simulator conditions. The high porosity of CuO–Sb2O5–SnO2 ceramics permits the permeation of the hematite precursor into the substrate bulk, which results in 3D-growth of a thin Fe2O3-coating (50 nm or less) on conductive SnO2-grains in the ceramics to a depth of ca. 5 μm. The thick photocatalytic layer (SnO2-grains coated by hematite) of several micrometers assures a good light harvesting by the photoelectrode, while the nano-sized Fe2O3-films on conductive SnO2-grains is favorable for charge diffusion. This architecture of the photoelectrode results in good photoelectrochemical characteristics and is promising for further development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron oxide chemistry and applications · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Photoelectrochemical water splitting10.1002/elan.201400587 ↗
2. Electrocatalysts for photoelectrochemical water splitting
3. Particulate photocatalysts for water splitting: recent advances and future prospects10.1021/acsenergylett.8b02209 ↗
4. Thin film photoelectrodes for solar water splitting10.1039/C8CS00868J ↗
5. Progress on ternary oxide-based photoanodes for use in photoelectrochemical cells for solar water splitting10.1039/C8CS00761F ↗
6. Synthesis of host-guest hematite photoelectrodes for solar water splitting10.1002/cnma.201900141 ↗
7. Progress on ternary oxide-based photo-anodes for use in photoelectrochemical cells for solar water splitting10.1039/C8CS00761F ↗
8. Hematite heterostructures for photoelectrochemical water splitting: rational materials design and charge carrier dynamics10.1039/C6EE01845A ↗
9. Nanostructured hematite: synthesis, characterization, charge carrier dynamics, and photoelectrochemical properties10.1039/c2ee00001f ↗
10. Solar hydrogen production with nanostructured metal oxides10.1039/b718969a ↗
11. Unraveling the role of single layer graphene as overlayer on hematite photoanodes10.1016/j.jcat.2019.02.030 ↗
12. Enhanced photoelectrochemical water splitting of hematite multilayer nanowire photoanodes by tuning the surface state via bottom-up interfacial engineering10.1039/C7EE01475A ↗
13. Kinetics versus charge separation: improving the activity of stoichiometric and non-stoichiometric hematite photoanodes using a molecular iridium water oxidation catalyst10.1021/acs.jpcc.6b00735 ↗
14. Hematite surface modification toward efficient sunlight-driven water splitting activity: the role of gold nanoparticle addition10.1021/acs.jpcc.9b11966 ↗
15. Strategies for semiconductor/electrocatalyst coupling toward solar-driven water splitting10.1002/advs.201902102 ↗
16. A. Vilanova, P. Dias, J. Azevedo, M. Wullenkord, C. Spenke, T. Lopes, A. Mendes, Solar water splitting under natural concentrated sunlight using a 200 cm2 photoelectrochemical-photovoltaic device, J. Power Sources 454(2020), 227890-227913.10.1016/j.jpowsour.2020.227890 ↗
17. Large-area photoelectrochemical water splitting using a multi-photoelectrode approach10.1016/j.jpowsour.2018.07.054 ↗
18. Strategies to improve the photoelectrochemical performance of hematite nanorod-based photoanodes10.1063/5.0003146 ↗
19. Morphology engineering of photoelectrodes for efficient photoelectrochemical water splitting10.1016/j.nanoen.2020.104648 ↗
20. Surface and bulk modification for advanced electrode design in photoelectrochemical water splitting10.1016/j.ijhydene.2019.08.114 ↗
21. 10% solar-to-hydrogen efficiency unassisted water splitting on ALD-protected silicon heterojunction solar cells10.1039/C9SE00110G ↗
22. Solar water splitting: progress using hematite (α-Fe2O3) photoelectrodes10.1002/cssc.201000416 ↗
23. New benchmark for water photooxidation by nanostructured α-Fe2O3 films10.1021/ja064380l ↗
24. High solar flux concentration water splitting with hematite (α-Fe2O3) photoanodes10.1002/aenm.201500817 ↗
25. Nearly total solar absorption in ultrathin nanostructured iron oxide for efficient photoelectrochemical water splitting10.1021/ph4001026 ↗
26. Stable hematite nanosheet photoanodes for enhanced photoelectrochemical water splitting10.1002/adma.201601525 ↗
27. Activation of a-Fe2O3 for photoelectrochemical water splitting strongly enhanced by low temperature annealing in low oxygen containing ambient10.1002/chem.201904430 ↗
28. On the effect of Sn-doping in hematite anodes for oxygen evolution10.1016/j.electacta.2016.08.046 ↗
29. Will solar-driven water-splitting devices see the light of day?10.1021/cm4021518 ↗
30. Using hematite for photoelectrochemical water splitting: a review of current progresses and challenges10.1039/C5NH00098J ↗
31. Nanomaterials for photoelectrochemical water splitting- review10.1016/j.ijhydene.2018.01.099 ↗
32. Nanostructured hematite thin films for photoelectrochemical water splitting10.1016/j.physb.2017.06.054 ↗
33. Influence of Sb5+ as a double donor on hematite (Fe3+) photoanodes for surface-enhanced photoelectrochemical water oxidation10.1021/acsami.8b02147 ↗
34. Enhanced photoelectrochemical water splitting of hematite multilayer nanowire photoanodes by tuning the surface state via bottom-up interfacial engineering10.1039/C7EE01475A ↗
35. Surface, bulk, and interface: rational design of hematite architecture toward efficient photo‐electrochemical water splitting10.1002/adma.201707502 ↗
36. Synthesis of host‐guest hematite photoelectrodes for solar water splitting10.1002/cnma.201900141 ↗
37. Highly porous SnO2 nanosheet arrays sandwiched within TiO2 and CdS quantum dots for efficient photoelectrochemical water splitting10.1016/j.apsusc.2018.11.182 ↗
38. Transparent conduction Nb:SnO2 for host-guest photoelectrochemistry10.1021/nl303101n ↗
39. A self-assembled organic/metal junction for water photo-oxidation10.1021/jacs.9b02693 ↗
40. Electron collection in host-guest nanostructured hematite photoanodes for water splitting: the influence of scaffold doping density10.1021/am5078667 ↗
41. Synthesis and photoelectrochemical cell properties of vertically grown α-Fe2O3 nanorod arrays on a gold nanorod substrate10.1039/b921965j ↗
42. A hematite photoelectrode grown on porous and conductive SnO2 ceramics for solar-driven water splitting10.1016/j.ijhydene.2019.06.055 ↗
43. BiVO4 photoanode grown on porous and conductive SnO2 ceramics for water splitting driven by solar energy10.1016/j.ceramint.2019.12.152 ↗
44. Interfacial defects passivation using fullerene-polymer mixing layer for planar-structure perovskite solar cells with negligible hysteresis10.1016/j.solener.2020.06.057 ↗
45. Critical role of interface contact modulation in realizing low-temperature fabrication of efficient and stable CsPbIBr2 perovskite solar cells10.1016/j.cej.2020.124903 ↗
46. Interface modulator of ultrathin magnesium oxide for low‐temperature processed inorganic CsPbIBr2 perovskite solar cells with efficiency over 11%10.1002/solr.202000226 ↗
47. SnO2/Mg combination electron selective transport layer for Si heterojunction solar cells10.1016/j.solmat.2019.109996 ↗
48. Electrical properties of SnO2 ceramics for low voltage varistors10.1016/j.physb.2014.09.026 ↗
49. Varistor ceramics10.1111/j.1151-2916.1999.tb01793.x ↗
50. SnO2, ZnO and related polycrystalline compound semiconductors: an overview and review on the voltage-dependent resistance (non-ohmic) feature10.1016/j.jeurceramsoc.2007.06.011 ↗
51. The effect of humidity on the voltage–current characteristic of SnO2 based ceramic varistor10.1016/j.jeurceramsoc.2003.09.008 ↗
52. A comprehensive review on structures and gas sensors10.1016/j.pmatsci.2014.06.003 ↗
53. SnO2 nanostructure as pollutant gas sensors: synthesis, sensing performances, and mechanism10.1155/2015/694823 ↗
54. Growth of NdFeAsO films by a combination of metal–organic chemical vapor deposition and Arsenic Diffusion Processes10.1109/TASC.2013.2286133 ↗
55. Efficiency definitions in the field of PEC
56. Structural, opto-electronic and photoelectrochemical properties of tin doped hematite nanoparticles for water splitting10.1016/j.mssp.2019.104873 ↗
57. The influence of oxygen content on the thermal activation of hematite nanowires10.1002/anie.201107467 ↗
58. Effect of tetravalent dopants on hematite nanostructure for enhanced photoelectrochemical water splitting10.1016/j.apsusc.2017.09.042 ↗
59. A novel strategy for surface treatment on hematite photoanode for efficient water oxidation10.1039/C2SC20881D ↗
60. Influence of Sb5+ as a double donor on hematite (Fe3+) photoanodes for surface-enhanced photoelectrochemical water oxidation10.1021/acsami.8b02147 ↗
61. Optical absorption spectrum of hematite, α-Fe2O3, near IR to near UV10.1016/0022-3697(80)90105-5 ↗
62. Photooxidation of water at α‐Fe2O3 electrodes10.1149/1.2131532 ↗
63. The transient photocurrent and photovoltage behavior of a hematite photoanode under working conditions and the influence of surface treatments10.1021/jp308591k ↗
64. Synthesis and photoelectrochemical water oxidation of (Y, Cu) codoped α-Fe2O3 nanostructure photoanode10.1016/j.jallcom.2019.152349 ↗
65. Anomalous transport effects in the impedance of porous film electrodes10.1016/S1388-2481(99)00084-3 ↗
66. Influence of the boundaries in the impedance of porous film electrodes10.1039/b001708f ↗
67. Hematite photoelectrodes for water splitting: evaluation of the role of film thickness by impedance spectroscopy10.1039/C3CP55473B ↗
68. Water oxidation at hematite photoelectrodes: the role of surface states10.1021/ja210755h ↗
69. Determination of the flat band potential of nanoparticles in porous electrodes by blocking the substrate-electrolyte contact10.1021/acs.jpcc.7b11423 ↗
70. Flat band potential determination: avoiding the Pitfalls10.1039/C9TA09569A ↗
71. Enhancement of photoelectrochemical hydrogen production from hematite thin films by the introduction of Ti and Si10.1021/jp074556l ↗
72. Photoactivity of doped α-Fe2O3 electrodes10.1149/1.2131535 ↗
73. Photoassisted electrolysis of water using single crystal α-Fe2O3 anodes10.1016/0025-5408(76)90178-1 ↗
74. Photoelectrochemical splitting of water at nanocrystalline n-Fe2O3 thin-film electrodes10.1021/jp990066k ↗
75. The effect of MgO coating on photocatalytic activity of SnO2 for the degradation of chlorophenol and textile colorants; the correlation between the photocatalytic activity and the negative shift of flatband potential of SnO210.1016/j.apcata.2006.11.013 ↗
76. Spectroelectrochemistry of highly doped nanostructured tin dioxide electrodes10.1021/jp9835566 ↗