journal article·2019-03

Impact of the manufacturing process on the reverse-bias characteristics of high-efficiency n-type bifacial silicon wafer solar cells

Vinodh Shanmugam, Ning Chen, Xia Yan, Ankit Khanna, Balaji Nagarajan, John Rodriguez, Naomi Nandakumar, Holger Knauss, Helge Haverkamp, Armin Aberle, Shubham Duttagupta

Publisher page

Abstract

Abstract In this paper, bifacial n-type silicon wafer solar cells with a front boron-diffused emitter and a rear phosphorus-diffused back surface field are investigated. The cell structure is abbreviated as nFAB (n-type Front and Back Contact). Three different process flows are evaluated for the fabrication of nFAB cells: (1) process flow with a silicon nitride diffusion mask deposited by plasma-enhanced chemical vapour deposition (PECVD), (2) process flow with a silicon oxynitride diffusion mask also deposited by PECVD, and (3) process flow using single-sided atmospheric pressure chemical vapour deposition (APCVD), without diffusion masks. An average batch efficiency of 21.3% was measured (front side illumination only) for all three nFAB process flows. However, the reverse bias I-V characteristics are observed to be remarkably different and dependent on the process flow, especially with regards to the masking processes. For process flow 1 that uses a silicon nitride PECVD mask, the reverse bias I-V characteristics are poor with a severe breakdown occurring at − 5 V and a reverse current of 18 A at −10 V. Process flow 2 with a silicon oxynitride PECVD mask leads to significantly improved reverse characteristics with a reverse current of 1 A at −10 V. For the APCVD process flow without diffusion masks, excellent reverse bias characteristics are observed with a reverse current of only 3 mA at −10 V. Reverse-biased electroluminescence imaging is used to determine the breakdown regions of the cells for the different process flows and to analyse the impact of the diffusion masking step on the cells’ breakdown characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Recombination activity of interstitial iron and other transition metal point defects in p-and n-type crystalline silicon10.1063/1.1812833 ↗
2. Minority carrier lifetime degradation in boron-doped Czochralski silicon10.1063/1.1389076 ↗
3. Status of high efficiency, low cost n-type silicon solar cells10.1016/j.egypro.2017.09.262 ↗
4. 21% efficient screen-printed n-type silicon wafer solar cells with implanted phosphorus front surface field10.1016/j.solmat.2018.06.036 ↗
5. Towards 22% efficient screenprinted bifacial n-type silicon solar cells10.1016/j.solmat.2018.07.020 ↗
6. T. Dullweber, N. Wehmeier, A. Nowack, T. Brendemühl, S. Kajari-Schröder, R. Brendel, BiCoRE: Combining a PERC-type cell process with n-type wafers.
7. J. Benick, B. Steinhauser, R. Müller, J. Bartsch, M. Kamp, A. Mondon, A. Richter, M. Hermle, and S. Glunz. High efficiency n-type PERT and PERL solar cells, in: Proceedings of the 40th Photovoltaic Specialist Conference (PVSC), IEEE, 2014.10.1109/PVSC.2014.6924895 ↗
8. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
9. Toward the practical limits of silicon solar cells10.1109/JPHOTOV.2014.2350695 ↗
10. Co-diffused bi-facial PERT solar cells10.1016/j.egypro.2017.09.247 ↗
11. Electrical behaviour of n-type silicon solar cells under reverse bias: influence of the manufacturing process10.1016/j.solmat.2012.04.046 ↗
12. Development of industrial processes for the fabrication of high efficiency n-type PERT cells10.1016/j.solmat.2014.06.022 ↗
13. F.D. Raphael Cabal, Vincent Sanzone, Pierre Brand, Yannick Veschetti, Industrial process leading to 19.1% on N-type Cz silicon, in: Proceedings of the 26th Eurpoean Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2011.
14. Analysis and modelling the reverse characteristic of photovoltaic cells10.1016/j.solmat.2005.06.006 ↗
15. Understanding junction breakdown in multicrystalline solar cells10.1063/1.3562200 ↗
16. Breakdown voltage mapping through voltage dependent ReBEL intensity imaging of multi-crystalline Si solar cells10.1016/j.physb.2017.06.041 ↗
17. Identification of pre-breakdown mechanism of silicon solar cells at low reverse voltages10.1063/1.3480415 ↗
18. Observation of metal precipitates at prebreakdown sites in multicrystalline silicon solar cells10.1063/1.3272682 ↗
19. Hot spots in multicrystalline silicon solar cells: avalanche breakdown due to etch pits10.1002/pssr.200802250 ↗
20. Correlation of pre-breakdown sites and bulk defects in multicrystalline silicon solar cells10.1002/pssr.200802264 ↗
21. Reverse biased electroluminescence spectroscopy of crystalline silicon solar cells with high spatial resolution10.1002/pssa.201026309 ↗
22. Electroluminescence of silicon solar cells using a consumer grade digital camera
23. The effect of oxide precipitates on minority carrier lifetime in n-type silicon10.1063/1.4936852 ↗
24. Detecting efficiency-limiting defects in Czochralski-grown silicon wafers in solar cell production using photoluminescence imaging10.1002/pssr.201105183 ↗
25. Quantifying edge and peripheral recombination losses in industrial silicon solar cells10.1109/TED.2015.2480089 ↗
26. Electrical properties of thin PECVD silicon oxynitride films10.1016/0169-4332(87)90094-8 ↗
27. Sze · 2002