journal article·2014-01

Design of intermediate layers for solution-processed tandem organic solar cells: Guidelines from a case study on TiOx and ZnO

Balthazar Lechêne, Gérard Perrier, Konstantinos Emmanouil, Stella Kennou, Benjamin Bouthinon, Rémi de Bettignies

Publisher page

Abstract

Abstract In this work, we design and compare two intermediate layers (IMLs) for solution-processed tandem organic solar cells. The IMLs are made of PEDOT as the hole transport layer (HTL) coupled with either TiO x or ZnO nanoparticles as the electron transport layer (ETL). The IMLs are characterized with regard to the requirements usually found in the literature: process robustness, work function compatibilities, good optical transparency, good electrical conductivity, and finally, the effective presence of an ohmic contact between the ETL and the HTL. Specifically designed single and tandem cells are then made to compare the performances of the two IMLs. We show that the ohmic contact is the most important criterion, which has to be carefully probed in order to design a functional IML. We offer recommendations on how to properly investigate this property. We also show that the nature of the ETL/HTL contact cannot be predicted from the results of the materials characterization, particularly not from the work functions and neither from the conductivities. Finally, XPS and work function experiments suggest that the nature of the contact depends on phenomena arising at the interface between the HTL and the ETL. Specifically, a chemical interaction is observed between ZnO and PEDOT within the IML. We conclude that a ZnO-based IML is a better choice than a TiO x -based IML.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
2. Ultimate performance of polymer: fullerene bulk heterojunction tandem solar cells10.1063/1.3549693 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
4. S. Sista, Z. Hong, L.-M. Chen, Y. Yang, Tandem polymer photovoltaic cells—current status, challenges and future outlook, Energy and Environmental Science 4 (2011) 1606–1620.10.1039/c0ee00754d ↗
5. Design rules for donors in bulk heterojunction tandem solar cells–towards 15% energy conversion efficiency10.1002/adma.200702337 ↗
6. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
7. Organic tandem solar cells: a review10.1039/b817952b ↗
8. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
9. Double and triple junction polymer solar cells processed from solution10.1063/1.2719668 ↗
10. Design of the solution-processed intermediate layer by engineering for inverted organic multi junction solar cells10.1002/aenm.201200659 ↗
11. Device operation of organic tandem solar cells10.1016/j.orgel.2008.03.009 ↗
12. Role of transition metal oxides in the charge recombination layer used in tandem organic photovoltaic cells10.1039/c2jm30272a ↗
13. A robust inter-connecting layer for achieving high performance tandem polymer solar cells10.1002/adma.201100221 ↗
14. High work function transparent middle electrode for organic tandem solar cells10.1063/1.3387863 ↗
15. A solution process for inverted tandem solar cells10.1016/j.orgel.2010.11.017 ↗
16. Impedance spectrometry of optimized standard and inverted P3HT-PCBM organic solar cells10.1016/j.solmat.2012.01.013 ↗
17. The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study10.1063/1.2784961 ↗
18. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
19. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
20. High-efficiency inverted solar cells based on a low bandgap polymer with excellent air stability10.1016/j.solmat.2011.09.042 ↗
21. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
22. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
23. Solution processed polymer tandem solar cell using efficient small and wide bandgap polymer: fullerene blends10.1002/adma.201104939 ↗
24. Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance10.1063/1.3601474 ↗
25. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
26. Interface state recombination in organic solar cells10.1103/PhysRevB.81.205307 ↗
27. Exciton formation, relaxation, and decay in PCDTBT10.1021/ja105290e ↗
28. Charge formation, recombination, and sweep-out dynamics in organic solar cells10.1002/adfm.201101632 ↗
29. Charge injection and transport studies of poly(2,7-carbazole) copolymer PCDTBT and their relationship to solar cell performance10.1016/j.orgel.2012.01.030 ↗
30. Energy level alignment and sub-bandgap charge generation in polymer: fullerene bulk heterojunction solar cells10.1002/adma.201204495 ↗
31. Anatase colloidal solutions suitable for inkjet printing: enhancing lifetime of hybrid organic solar cells10.1016/j.solmat.2013.04.006 ↗
32. Optical modelling of a layered photovoltaic device with a polyfluorene derivative/fullerene as the active layer10.1016/j.solmat.2004.02.023 ↗
33. Analysis of light scattering in amorphous Si:H solar cells by a one-dimensional semi-coherent optical model10.1002/pip.460 ↗
34. Efficient inverted tandem polymer solar cells with a solution-processed recombination layer10.1002/aenm.201100773 ↗
35. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
36. S-shaped current–voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
37. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
38. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
39. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of Poly(3,4-ethylenedioxythiophene)/Poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
40. Photoelectron spectroscopy of thin films of PEDOT–PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
41. Work function measurements on nano-crystalline zinc oxide surfaces10.1063/1.4729527 ↗