journal article·2015-10

Preparation and characterization of absorbing tubes with spectrally selective coatings using economical methods for low- to mid-temperature solar thermal collectors

Reza Elyasi, Seyed Mostafa Nowee, Hamed Azizi Namaghi, Navid Ramezanian

Publisher page

Abstract

Abstract Absorbing surfaces with spectrally selective coatings having both high solar absorptance ( α S ) and low thermal emittance ( e T ) are used in solar collectors. Selective absorbing surfaces can be made of specific materials or combinations of them with various methods. The common methods of fabrication are executed on the basis of the surface coating, whereas the solar absorptance depends on the black coated layer and the thermal emittance on the undercoating layer. In this study, absorbing surfaces from various materials were coated using electrodeposition, chemical conversion (such as the chromate conversion), anodizing and painting techniques in accordance to specified formulas and the existing operating conditions. Materials such as stainless steel 316, copper and aluminum have been deployed as substrates of the samples. The samples of the selective absorbing surface were considered as absorber–reflector tandems. According to the experimental results from the performed optical characterization of the fabricated samples, it can be deduced that most of them had high solar absorptance α S more than 0.80 (up to 0.940) and low thermal emittance e T (100 °C) less than 0.12 (as low as 0.085). In addition, most samples had high photothermal conversion efficiency ( η ) and selectivity factor ( α S / e T ) . Also, the morphology of surfaces and particular elements identification of the coatings were studied and evaluated by scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS) detector. Moreover, the cross-section image was used to determine the approximate thickness of the films formed in some of the prepared samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Performance of a “black” liquid flat-plate solar collector10.1016/0038-092X(75)90057-2 ↗
2. Radiative property measurements for india ink suspensions of varying concentration10.1016/0038-092X(80)90089-4 ↗
3. Solchrome solar selective coatings—an effective way for solar water heaters globally10.1016/S0960-1481(99)00028-2 ↗
4. Solar thermal electric power systems in Japan10.1016/0038-092X(80)90464-8 ↗
5. Kennedy · 2002
6. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
7. High efficiency Mo–Al2O3 cermet selective surfaces for high-temperature application10.1016/0927-0248(95)00078-X ↗
8. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
9. A new chrome black selective absorbing surface10.1016/0038-092X(77)90074-3 ↗
10. Thermal degradation of black chrome coatings10.1016/S0927-0248(99)00164-6 ↗
11. Agnihotri · 1981
12. Selvakumar · 2010
13. Review materials for photothermal solar energy conversion10.1007/BF00700767 ↗
14. Electrodeposition of black chromium spectrally selective coatings from a Cr(III)–ionic liquid solution10.1016/j.tsf.2010.10.029 ↗
15. Electrochemically grown cobalt–alumina composite layer for solar thermal selective absorbers10.1016/j.solmat.2014.07.041 ↗
16. Low-cost black Cu–Ni alloy coatings for solar selective applications10.1016/j.solmat.2006.12.004 ↗
17. Electrodeposition of black chromium from environmentally electrolyte based on trivalent chromium salt10.1016/j.surfcoat.2009.05.022 ↗
18. Structure, Optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
19. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
20. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
21. Characterisation of high-temperature-resistant spectrally selective paints for solar absorbers10.1016/S0927-0248(98)00181-0 ↗
22. A paint for selective solar absorbers10.1016/0165-1633(81)90062-9 ↗
23. Optical characterization and modeling of black pigments used in thickness-sensitive solar-selective absorbing paints10.1016/S0038-092X(01)00016-0 ↗
24. The preparation and testing of spectrally selective paints on different substrates for solar absorbers10.1016/S0038-092X(01)00059-7 ↗
25. Spectrally selective paint coatings: preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
26. Spectrally selective silicon paint coatings: influence of pigment volume concentration ratio on their optical properties10.1016/0927-0248(95)00087-9 ↗
27. Selective paint coatings for coloured solar absorbers: polyurethane thickness insensitive spectrally selective (TISS) paints (Part II)10.1016/j.solmat.2006.07.012 ↗
28. Silicone-based thickness insensitive spectrally selective (TISS) paints as selective paint coatings for coloured solar absorbers (Part I)10.1016/j.solmat.2006.07.013 ↗
29. Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers10.1016/j.solmat.2011.05.014 ↗
30. Coil-coating paints for solar collector panels-II. FT-IR spectroscopic investigations10.1016/0741-983X(90)90046-5 ↗
31. FTIR spectroscopic investigations and the thermal stability of thickness sensitive spectrally selective (TSSS) paint coatings10.1016/0165-1633(91)90034-I ↗
32. Selective black nickel coatings on zinc surfaces by chemical conversion10.1016/0038-092X(79)90148-8 ↗
33. Surface analysis of a black copper selective coating10.1016/0165-1633(91)90156-F ↗
34. Solar selective black molybdenum coatings by chemical conversion10.1016/0040-6090(83)90108-6 ↗
35. Black nickel–cobalt: selective coatings prepared by a conversion process10.1016/0040-6090(88)90285-4 ↗
36. Optimization and evaluation of black zinc selective solar absorber surfaces10.1016/0040-6090(84)90316-X ↗
37. Electrolytic coloring of anodic aluminum for selective solar absorbing films: use of additives promoting color depth and rate10.1016/S0960-1481(00)00129-4 ↗
38. Metal/insulator composite selective absorbers10.1016/0165-1633(79)90061-3 ↗
39. Duffie · 2006
40. Tesfamichael · 2000
41. Measurement of total reflectance, transmittance and emissivity over the thermal IR spectrum10.1016/0020-0891(85)90108-3 ↗
42. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗