Electrochromic, optical and binding-energy performances of Tantalum Pentoxide and Zirconium dioxide films deposited with RF magnetron sputtering and cathodic arc plasma
Source abstract
Abstract
Abstract This research investigated the electrochromic, optical and binding-energy performances of Tantalum Pentoxide (Ta2O5) and Zirconium Dioxide (ZrO2) films as the ion conduction layer for an all-solid-state electrochromic device (ECD). The Ta2O5 film was commonly prepared by radio frequency (RF) magnetron sputtering with different oxygen/argon (O2/Ar) ratio, while the ZrO2 film was prepared by a cathodic arc with different deposition pressure because the ZrO2 film deposited with RF magnetron sputtering achieved poor electrochromic efficiency. The results exhibited that the Ta2O5 film deposited with O2/Ar ratio of 0.1 had the maximum colored/bleached variation (ΔT) of 52.9%@550 nm, color efficiency (CE) of 21.1 cm2/C, ionic conducting rate of 3 × 10−7 S/cm, and the lowest resistance of 14.3 kΩ. On the other hand, the ZrO2 film deposited with deposition pressure of 45 mTorr had the maximum ΔT of 55.43%@550 nm, CE of 35 cm2/C, ion conducting rate of 3.44 × 10−6 S/cm, and the lowest resistance of 19.37 kΩ. The colored/bleached variation of ZrO2 film was better than that of the Ta2O5 film, as proved by the location shifting of the binding-energy of Zr3d deposited by cathodic arc being larger than that of the Ta4f deposited by RF sputtering. However, the economic ZrO2 film has the potential to replace the traditional Ta2O5 film for an all-solid-state ECD.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Electrochromic coatings and devices: survey of some recent advances10.1016/S0040-6090(03)00983-0 ↗
2. Bond and electrochromic properties of WO3 films deposited with horizontal DC, pulsed DC, and RF sputtering10.1016/j.electacta.2013.01.094 ↗
3. A review on fabrication processes for electrochromic devices10.1007/s40684-016-0049-8 ↗
4. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
5. Electrochromic and optical properties of tungsten oxide films deposited with DC sputtering by introducing hydrogen10.1364/AO.53.00A321 ↗
6. Next-generation multifunctional electrochromic devices10.1021/acs.accounts.6b00183 ↗
7. Electrochromic glass vs. fritted glass: an analysis of glare control performance10.1016/j.egypro.2017.07.334 ↗
8. All-inorganic solid-state electrochromic devices: a review
9. Dynamic behaviors of inorganic all-solid-state electrochromic device: role of potential10.1016/j.electacta.2018.02.050 ↗
10. Sol-gel electrochromic device10.1007/BF00486329 ↗
11. Large area electrochromics for architectural applications10.1016/S0022-3093(97)00242-1 ↗
12. All-solid-state electrochromic reflectance device for emittance modulation in the far-infrared spectral region10.1063/1.1288810 ↗
13. Tantalum oxide film prepared by reactive magnetron sputtering deposition for all-solid-state electrochromic device10.1016/j.tsf.2011.08.046 ↗
14. The improvement of all-solid-state electrochromic devices fabricated with the reactive sputter and cathodic arc technology10.1063/1.4967363 ↗
15. Sputter-deposited nickel oxide for electrochromic applications10.1016/S0167-2738(98)00309-9 ↗
16. Thin film solid state ionic materials for electrochromic smart window TM glass10.1016/0167-2738(88)90448-1 ↗
17. Goldner · 1991
18. d-Electrons and two active thin film devices for achieving a solar energy economy10.1016/0927-0248(94)90105-8 ↗
19. Fabrication and testing of an all-solid state system for smart window application10.1016/0167-2738(96)00264-0 ↗
20. An all-solid-state inorganic electrochromic display of WO3 and NiO films with LiNbO3 ion conductor10.1109/55.841300 ↗
21. LiPON thin films with high nitrogen content for application in lithium batteries and electrochromic devices prepared by RF magnetron sputtering10.1016/j.ssi.2015.09.022 ↗
22. Electrochemical studies of silicon nitride electron blocking layer for all-solid-state inorganic electrochromic device10.1016/j.electacta.2017.08.177 ↗
23. Lithiation studies on some transition metal oxides for an all-solid thin film electrochromic system10.1016/0167-2738(93)90230-Z ↗
24. Variable transmittance coatings using electrochromic lithium chromate and amorphous WO3 thin films10.1149/1.1837513 ↗
25. Properties of NiOx and its influence upon all-thin-film ITO/NiOx/LiTaO3/WO3/ITO electrochromic devices prepared by magnetron sputtering10.1016/j.vacuum.2014.09.007 ↗
26. An all-thin-film inorganic electrochromic device monolithically fabricated on flexible PET/ITO substrate by magnetron sputtering
27. All-solid-state electrochromic device with NiO/WO3 complementary structure
28. Large-area flexible monolithic ITO/WO3/Nb2O5/NiVOχ/ITO electrochromic devices prepared by using magnetron sputter deposition10.1016/j.optmat.2016.03.021 ↗
29. Photometric characterization of an all solid state inorganic electrochromic large area device10.1016/S0927-0248(98)00134-2 ↗
30. Improved electrochromic devices with an inorganic solid electrolyte protective layer10.1016/j.solmat.2005.04.033 ↗
31. All inorganic thin film electrochromic device using LiPON as the ion conductor10.1016/j.solmat.2015.06.052 ↗
32. An all-thin-film electrochromic device composed of MoO3-LiBSO-NiOx, multilayer structure10.1088/0256-307X/25/2/105 ↗
33. A new all-thin-film electrochromic device using LiBSO as the ion conducting layer10.1088/0022-3727/41/11/115301 ↗
34. The activation process through a bimodal transmittance state for improving electrochromic performance of nickel oxide thin film10.1016/j.solmat.2012.09.012 ↗
35. Influence of the porosity of RF sputtered Ta2O5 thin films on their optical properties for electrochromic applications10.1016/j.ssi.2003.08.018 ↗
36. Inkjet-printed all solid-state electrochromic devices based on NiO/WO3 nanoparticle complementary electrodes10.1039/C5NR06995E ↗
37. Inkjet-printed all solid-state electrochromic devices based on NiO/WO3 nanoparticle complementary electrodes10.1039/C5NR06995E ↗
38. A rapid-response electrochromic device with significantly enhanced electrochromic performance10.1039/C4RA10379C ↗
39. Electrochromism in WO3 amorphous films
40. A simple method for the determination of the optical constants n, k and the thickness of a weekly absorbing thin film
41. AES and XPS study of thin RF-sputtered Ta2O5 layers10.1016/0169-4332(94)00538-9 ↗
42. Optical properties of sol-gel dip-coated Ta2O5 films for electrochromic applications10.1016/S0927-0248(99)00041-0 ↗
43. Bakradze · 2011
44. Structure and properties of zirconia (ZrO2) films fabricated by plasma-assisted cathodic arc deposition10.1088/0022-3727/40/8/S08 ↗
45. Chastain · 1995
46. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
47. Influence of the porosity of RF sputtered Ta2O5 thin films on their optical properties for electrochromic applications10.1016/j.ssi.2003.08.018 ↗
48. Choy · 2015
49. Dielectric function of amorphous tantalum oxide from the far infrared to the deep ultraviolet spectral region measured by spectroscopic ellipsometry10.1063/1.1313784 ↗
50. Effect of oxygen content on the electrochromic properties of sputtered tungsten oxide films with Li+ insertion10.1016/S0042-207X(98)00189-4 ↗
51. Roll-to-roll pulsed dc magnetron sputtering deposition of WO3 for electrochromic windows10.1016/S0013-4686(01)00362-0 ↗
52. Chastain · 1995
53. Structure and properties of zirconia (ZrO2) films fabricated by plasma-assisted cathodic arc deposition10.1088/0022-3727/40/8/S08 ↗
54. Effect of growth temperature on the structural and electrical properties of ZrO2 films fabricated by atomic layer deposition using a CpZr [N (CH3) 2] 3/C7H8 cocktail precursor10.3390/ma11030386 ↗