Novel paraffin/ethylene propylene diene monomer phase change latex with excellent stability and low viscosity
Source abstract
Abstract
Abstract Phase change latex (PCL) is a novel kind of phase change fluid with advantages both phase change emulsion (PCE) and latex. A series of oil/water PCLs were obtained by dissolving paraffin and ethylene propylene diene monomer (EPDM) in petroleum ether, followed by emulsifying in water. The effects of emulsifier type, emulsifier content, homogenization rate and paraffin content on stability, viscosity and particle size of PCL were systematically investigated. The results showed that paraffin/EPDM PCL was able to be stably stored when the content of emulsifier, a mixture of 1-dodecanesulphonic acid sodium salt (DAS) and sorbitan monooleate (Span-80), was 6 wt% and homogenization rate was 16000 r/min. Afterwords, the PCL with the paraffin mass fractions (paraffin to the sum of paraffin and EPDM) from 0 wt% to 100 wt% were prepared. When the paraffin content is 50 wt%, the PCL has the most excellent stability and suitable particle size and distribution. As the paraffin content increased, the viscosity of PCL generally decreased sharply, and the PCL enthalpy value increased gradually. PCL has great application potential in the field of thermal energy transmission in chemical pipelines and building homes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Polymer composites and self-healing · Liquid Crystal Research Advancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Carbon based material included-shaped stabilized phase change materials for sunlight-driven energy conversion and storage: an extensive review10.1016/j.solener.2018.05.007 ↗
2. A comprehensive review of thermal energy storage10.3390/su10010191 ↗
3. Nanoencapsulation of phase change materials for advanced thermal energy storage systems10.1039/C8CS00099A ↗
4. Investigation of thermo-fluidic performance of phase change material slurry and energy transport characteristics10.1016/j.apenergy.2017.08.146 ↗
5. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
6. Formation of tetradecane nanoemulsion by low-energy emulsification methods10.1016/j.ijrefrig.2010.09.002 ↗
7. Influence of crystal layer on the flow and heat transfer characteristics during TBAB CHS generation in a double-tube heat exchanger10.1016/j.ijthermalsci.2013.01.008 ↗
8. A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids10.1016/j.rser.2017.05.257 ↗
9. A review of thermal conductivity of various nanofluids10.1016/j.molliq.2018.05.124 ↗
10. Synthesis and characterization of a narrow size distribution nano phase change material emulsion for thermal energy storage10.1016/j.solener.2017.03.056 ↗
11. Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media10.1016/j.energy.2016.04.021 ↗
12. Thermal properties and convective heat transfer of phase changing paraffin nanofluids10.1016/j.ijthermalsci.2017.03.024 ↗
13. Effective dispersion of multi-wall carbon nano-tubes in hexadecane through physiochemical modification and decrease of supercooling10.1016/j.solmat.2011.09.032 ↗
14. PCM in water emulsions: supercooling reduction effects of nano-additives, viscosity effects of surfactants and stability10.1002/adem.201300575 ↗
15. PCM-in-water emulsion for solar thermal applications: the effects of emulsifiers and emulsification conditions on thermal performance, stability and rheology characteristics10.1016/j.solmat.2015.12.022 ↗
16. Graphite nanoparticles-dispersed paraffin/water emulsion with enhanced thermal-physical property and photo-thermal performance10.1016/j.solmat.2015.12.013 ↗
17. Highly stable graphite nanoparticle-dispersed phase change emulsions with little supercooling and high thermal conductivity for cold energy storage10.1016/j.apenergy.2016.11.122 ↗
18. Optimization on the photo-thermal conversion performance of graphite nanoplatelets decorated phase change material emulsions10.1016/j.solmat.2018.07.005 ↗
19. Effect of morphology of carbon nanomaterials on thermo-physical characteristics, optical properties and photo-thermal conversion performance of nanofluids10.1016/j.renene.2016.07.073 ↗
20. Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery10.1016/j.applthermaleng.2018.07.037 ↗
21. Heat transfer analysis of microencapsulated phase change material slurry flow in heated helical coils: a numerical and analytical study10.1016/j.ijheatmasstransfer.2017.10.130 ↗
22. Dynamic thermal characteristics analysis of microencapsulated phase change suspensions flowing through rectangular mini-channels for thermal energy storage10.1016/j.enbuild.2016.11.021 ↗
23. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗
24. Thermal performance enhancement of composite phase change materials (PCM) using graphene and carbon nanotubes as additives for the potential application in lithium-ion power battery10.1016/j.ijheatmasstransfer.2017.12.024 ↗
25. Modified phase change microcapsules with calcium carbonate and graphene oxide shells for enhanced energy storage and leakage prevention10.1021/acssuschemeng.7b04834 ↗
26. An energy-efficient composite by using expanded graphite stabilized paraffin as phase change material10.1016/j.compositesa.2017.12.032 ↗
27. Thermal property enhancement of paraffin-wax-based hydroxyl-terminated polybutadiene binder with a novel NanoSiO2-expanded graphite-PW ternary form-stable phase change material10.1021/acs.energyfuels.7b03856 ↗
28. Graphene oxide-modified microencapsulated phase change materials with high encapsulation capacity and enhanced leakage-prevention performance10.1016/j.apenergy.2017.04.041 ↗
29. Effect of micro/nano-SiO2 on mechanical, thermal, and electrical properties of silicone rubber, epoxy, and EPDM composites for outdoor electrical insulations10.3906/elk-1603-20 ↗
30. Fracture toughness and deformation mechanism of un-vulcanized and dynamically vulcanized polypropylene/ethylene propylene diene monomer/graphene nanocomposites10.1016/j.compscitech.2017.01.015 ↗
31. The combination of expandable graphite, organic montmorillonite, and magnesium hydrate as fire-retardant additives for ethylene–propylene–diene monomer/chloroprene rubber foams10.1002/app.44929 ↗
32. Calculation of hydrophile-lipophile balance for polyethoxylated surfactants by group contribution method10.1016/j.jcis.2005.12.009 ↗
33. Phase behavior in systems of nonionic surfactant/water/oil around the hydrophile-lipophile-balance-temperature (Hlb-Temperature)10.1080/01932698208943639 ↗
34. Study on influencing factors of Pickering emulsions stabilized by hydroxyapatite nanoparticles with nonionic surfactants10.1039/C8SM00241J ↗
35. Improving emulsion formation, stability and performance using mixed emulsifiers: a review10.1016/j.cis.2017.12.001 ↗
36. Application of rheology for assessment and prediction of the long-term physical stability of emulsions10.1016/j.cis.2003.10.025 ↗
37. An experimental study of stability of oil–water emulsion10.1016/j.fuproc.2004.03.010 ↗
38. Influence of process parameters on droplet size distribution in SPG membrane emulsification and stability of prepared emulsion droplets10.1016/S0376-7388(03)00212-6 ↗
39. Phase change dispersion, potentially a new class of heat transfer fluids