journal article·2017-02

Direct imaging of dopant distributions across the Si-metallization interfaces in solar cells: Correlative nano-analytics by electron microscopy and NanoSIMS

Praveen Kumar, Michael Pfeffer, Benjamin Willsch, Oliver Eibl, Lluís Yedra, Santhana Eswara, Jean-Nicolas Audinot, Tom Wirtz

Publisher page

Abstract

Abstract The overall efficiencies of screen printed monocrystalline Si solar cells are limited by electrical losses across the Si-metallization interface. The process of metallization affects the emitter and space charge region of the solar cell, particularly with respect to the dopant distributions. Until now, direct imaging of dopant distributions across the interface has not been reported mainly because the concentrations of dopants are far below the detection limit of conventional analytical tools. In the present study, we harness the high-resolution (100 nm) high-sensitivity chemical imaging with Nano Secondary Ion Mass Spectrometry (NanoSIMS) and correlate with microstructural and electrical properties to elucidate the factors limiting the overall cell efficiencies. We analysed two sets of p-type solar cells fabricated from identical starting materials, the only difference being the firing temperature. It was found that the overall efficiency of cells fired at 900 °C was ∼17% while the efficiency of cells fired at 960 °C was only 13.6%. In phosphorus (P) ion maps, the P emitter structure was found to be well-preserved by NanoSIMS in cells fired at 900 °C, it was completely disintegrated in the overfired cells and thereby increasing the contact resistance. The passivation layer (SiNX) was found to be disintegrated in the overfired cell and furthermore, below the metallization, a diffusion cloud was observed wherein boron (B) rich domains extend over several µm. In the overfired cell the disintegration of the SiNX layer identified in the SEM correlated with the disintegrated emitter structure (P) analysed by NanoSIMS. This implies that the disintegration of the passivation layer leads to a diffusion of the dopants resulting in the loss of overall cell efficiency. Thus, our new comprehensive approach provides unprecedented insights into the factors limiting the overall efficiencies in solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Ion-surface interactions and analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Invited paper iron contamination in silicon technology10.1007/s003390051074 ↗
2. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
3. Rapid CIS-process for high efficiency PV-modules: development towards large area processing10.1016/S0040-6090(00)01800-9 ↗
4. Advanced stacked elemental layer process for Cu(InGa)Se2 thin film photovoltaic devices10.1557/PROC-426-165 ↗
5. Sangely · 2015 · 439
6. Application of focused ion beam lift-out specimen preparation to TEM , SEM , STEM , AES and SIMS analysis10.1002/sia.1063 ↗
7. Quantitative grain boundary analysis of bulk samples by SIMS10.1002/sia.4884 ↗
8. NanoSIMS analysis of trace element segregation during the Al-Si eutectic reaction10.1007/s11661-007-9165-y ↗
9. F. Siegelin, A. Dübotzky, B. Danzfuss, S. Schömann. Dopant analysis on advanced CMOS technologies, Presented at Proceedings of 34th International Symposium for Testing and Failure Analysis, Portland, 2008.10.31399/asm.cp.istfa2008p0505 ↗
10. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
11. Front side metallization of n- and p-type, high-efficiency, single-crystalline Si solar cells: assessing the temperature dependent series resistance10.1007/s11664-016-4459-8 ↗
12. Physical understanding of printed thick-film front contacts of crystalline Si solar cells – review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
13. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
14. Electron microscopy study of front-side Ag contact in crystalline Si solar cells
15. Combined microstructural and electrical characterization of metallization layers in industrial solar cells10.1016/j.egypro.2015.03.285 ↗
16. Contact formation of front side metallization in p-type, single crystalline Si solar cells: microstructure, temperature dependent series resistance and percolation model10.1016/j.solmat.2015.10.042 ↗
17. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
18. , Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
19. Mechanism underlying the beneficial effect of forming gas annealing on screen-printed Ag contacts of crystalline Si solar cells10.1016/j.actamat.2014.02.023 ↗
20. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
21. Development of screen-printed silicon solar cells with high fill factors on 100Ω/sq emitters10.1109/TED.2004.828280 ↗
22. Understanding the formation and temperature dependence of thick-film Ag contacts on high-sheet-resistance Si emitters for solar cells10.1149/1.2001507 ↗
23. Impact of screen printing silver paste components on the space charge region recombination losses of industrial silicon solar cells10.1016/j.solmat.2012.06.040 ↗
24. High-resolution high-sensitivity elemental imaging by secondary ion mass spectrometry: from traditional 2D and 3D imaging to correlative microscopy10.1088/0957-4484/26/43/434001 ↗
25. The nature of screen printed front side silver contacts – results of the project mikrosol10.1016/j.egypro.2013.11.085 ↗
26. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
27. A better approach to the evaluation of the series resistance of solar cells10.1016/0038-1101(79)90112-6 ↗
28. Advances in the analysis of biogeochemical interfaces: nanoSIMS to investigate soil microenvironments10.1016/B978-0-12-407685-3.00001-3 ↗
29. Series and contact resistance measurements between 80K and room temperature for industrial solar cells10.1016/j.egypro.2015.03.287 ↗
30. Elemental mapping of Neuromelanin organelles of human Substantia Nigra: correlative ultrastructural and chemical analysis by analytical transmission electron microscopy and nano-secondary ion mass spectrometry10.1111/jnc.13648 ↗
31. Metallization-induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
32. Simulating the interface morphology of silver thick film contacts on n-type Si-(100) and Si-(111)10.1063/1.4752228 ↗
33. High efficiency, crystalline Si solar cells with screen printed front side metallization: a percolation model for explaning the current path10.1007/s11664-016-4818-5 ↗