journal article·2009-02

Fabrication and opto-electric properties of ITO/ZnO bilayer films on polyethersulfone substrates by ion beam-assisted evaporation

Chi-Chang Liu, Yuan-Chang Liang, Chin-Chiuan Kuo, Yeuh-Yeong Liou, Jia-Wen Chen, Chung-Chih Lin

Publisher page

Abstract

Abstract Transparent conducting oxides bilayer films stacked by one 130-nm-thick indium tin oxide (ITO) top layer and one 75-nm-thick zinc oxide (ZnO) buffer layer were grown onto polyethersulfone (PES) substrates by ion beam-assisted evaporation. The effects of ion energy and ZnO buffer layers on the structural and opto-electric properties of ITO films were initially investigated. The as-deposited ZnO buffer layers show wurtzite (0 0 2) preferred orientation on the PES substrates with ion beam assistance. The results of X-ray diffraction reveal a marked increase in the crystallinity of the ITO films which use ZnO as a buffer layer material. A drop of ∼60% in electrical resistivity of the ITO film on the PES can be achieved by using ZnO buffer layer. The transmittance of the ITO/ZnO bilayer was not deteriorated due to the insertion of ZnO layer. The lowest electrical resistivity of 6.552×10−4 Ω-cm associated with the transmittance of ∼80% at the wavelength of 550 nm can be obtained for the ITO film on the ZnO-coated PES at ion energy of 60 eV. The ITO films on the ZnO-buffered PES with moderate control of ion energy have a promising future for the application of the contact layers for flexible solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Doping mechanisms of tin-doped indium oxide films10.1063/1.107673 ↗
2. Study of the effect of Sn doping on the electronic transport properties of thin film indium oxide10.1063/1.108703 ↗
3. Preparation of transparent and conductive In2O3–ZnO films by radio frequency magnetron sputtering10.1116/1.580323 ↗
4. Properties of indium zinc oxide thin films on heat withstanding plastic substrate10.1116/1.1692270 ↗
5. Deposition by magnetron sputtering and characterization of indium tin oxide thin films10.1016/j.tsf.2006.11.113 ↗
6. Effect of sputtering power on the structural and optical properties of RF magnetron sputtered ITO films10.1088/0268-1242/9/6/014 ↗
7. Preparation of conducting and transparent thin films of tin-doped indium oxide by magnetron sputtering10.1063/1.91829 ↗
8. Indium tin oxide thin films for organic light-emitting devices10.1063/1.124122 ↗
9. High mobility thin film transistors fabricated on a plastic substrate at a processing temperature of 110°C10.1143/JJAP.39.L179 ↗
10. An amorphous silicon thin film transistor fabricated at 125°C by dc reactive magnetron sputtering10.1063/1.118373 ↗
11. Effects of oxygen gas flow rate and ion beam plasma conditions on the opto-electronic properties of indium molybdenum oxide films fabricated by ion beam-assisted evaporation10.1016/j.tsf.2007.07.111 ↗
12. Silicon oxide gas barrier films deposited by reactive sputtering10.1016/S0257-8972(02)00769-7 ↗
13. Properties of SiO2-like barrier layers on polyethersulfone substrates by low-temperature plasma-enhanced chemical vapor deposition10.1016/j.tsf.2004.04.031 ↗
14. Improved ITO thin films with a thin ZnO buffer layer by sputtering10.1016/S0040-6090(99)01077-9 ↗
15. Molybdenum-doped indium oxide transparent conductive thin films10.1116/1.1421595 ↗
16. Ion doses for low-energy ion-assist applications10.1116/1.1633565 ↗
17. Structural and opto-electronic properties of transparent conducting (222)-textured Zr-doped In2O3/ZnO bilayer films10.1016/j.jcrysgro.2008.05.053 ↗
18. Textured aluminum-doped zinc oxide thin films from atmospheric pressure chemical-vapor deposition10.1063/1.351309 ↗
19. Structural, electrical and optical properties of Al-doped ZnO thin films prepared by filtered cathodic vacuum arc technique10.1016/j.jcrysgro.2004.04.098 ↗
20. Electrical properties of heteroepitaxial grown tin-doped indium oxide films10.1063/1.362910 ↗
21. Microstructure and electrical characteristics of sputtered indium tin oxide films10.1149/1.2221640 ↗
22. Effect of substrate-induced strain on the structural, electrical, and optical properties of polycrystalline ZnO thin films10.1063/1.1769598 ↗
23. Effect of substrate temperature on the properties of Ti-doped ZnO films by simultaneous rf and dc magnetron sputtering10.1016/j.matchemphys.2004.08.040 ↗
24. New figure of merit for transparent conductors10.1063/1.323240 ↗
25. On the physical properties of indium oxide thin films deposited by pyrosol in comparison with films deposited by pneumatic spray pyrolysis10.1016/S0040-6090(02)01185-9 ↗