Study on the Al–P3HT:PCBM interfaces in electrical stressed polymer solar cell by X-ray photoelectron spectroscopy
Source abstract
Abstract
Abstract In this study, X-ray photoelectron spectroscopy (XPS) was used to investigate the metal–organic interfaces of a P3HT:PCBM bulk-heterojunction (BHJ) organic solar cell under a high electrical field. This high electrical field was built by applying reverse bias to the solar cell. This electrical field stress enhances the fill factor, short-circuits current and reduces series resistance. As a consequence, the power conversion efficiency of a polymer solar cell enhanced by 8.3% compared to an unstressed solar cell. In addition, the reverse current density was quite low, consumed only a small amount of energy (0.36 mJ/cm 2 ) during stressing. The intermixing and atomic concentration gradient of Al and C shown by an XPS depth profile confirmed the penetration of Al into the polymer layer under a large electrical field, which improved the contact properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Luque · 2003
2. Temperature dependence of polymer/fullerene organic solar cells10.1016/j.solmat.2010.11.026 ↗
3. Enhanced efficiency of organic photovoltaic cells using solution-processed metal oxide as an anode buffer layer10.1016/j.solmat.2011.06.021 ↗
4. Gold nanomesh induced surface plasmon for photocurrent enhancement in a polymer solar cell10.1016/j.solmat.2011.02.031 ↗
5. Enhanced absorption and carrier collection in Si wire arrays for photovoltaic applications10.1038/nmat2727 ↗
6. Light trapping in silicon nanowire solar cells10.1021/nl100161z ↗
7. Fabrication of large area high density, ultra-low reflection silicon nanowire arrays for efficient solar cell applications10.1007/s12274-011-0162-5 ↗
8. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
9. Stability of polymer solar cells10.1002/adma.201104187 ↗
10. The OE-A O.P.V. demonstrator anno domini 201110.1039/c1ee01891d ↗
11. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
12. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
13. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
14. Effect of electrical annealing on the luminous efficiency of thermally annealed polymer light-emitting diodes10.1063/1.1328095 ↗
15. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
16. The formation of crystalline P3HT fibrils upon annealing of a PCBM:P3HT bulk heterojunction10.1016/j.tsf.2005.12.123 ↗
17. Polythiophene based bulk heterojunction solar cells: morphology and its implications10.1016/j.tsf.2005.12.031 ↗
18. Increased mobility from regioregular poly(3-hexylthiophene) field-effect transistors10.1063/1.1568526 ↗
19. Near-field photoconductivity of stretch-oriented poly(para-phenylene vinylene)10.1063/1.125465 ↗
20. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
21. The photocurrent quantum efficiency dependence on the applied voltage in organic solar cells10.1088/0268-1242/22/12/016 ↗
22. Measuring the external quantum efficiency of two-terminal polymer tandem solar cells10.1002/adfm.201001167 ↗
23. Polymer solar cells that use self-assembled-monolayer- modified ZnO/metals as cathodes10.1002/adma.200703050 ↗
24. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
25. Low vacuum process for polymer solar cells: effect of TiOx interlayer10.1063/1.2908035 ↗
26. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
27. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
28. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
29. Self-organized buffer layers in organic solar cells10.1002/adma.200792876 ↗
30. Efficient polythiophene/polyfluorene copolymer bulk heterojunction photovoltaic devices: device physics and annealing effects10.1002/adfm.200800182 ↗
31. The importance of post-annealing process in the device performance of poly(3-hexylthiophene): methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
32. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
33. Electronic structure and dynamics at organic donor/acceptor interfaces10.1557/mrs2010.582 ↗
34. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
35. Influence of polymer–metal interface on the photovoltaic properties and long-term stability of nc-TiO2–P3HT hybrid solar cells10.1016/j.solmat.2010.01.021 ↗
36. Understanding the improved stability of hybrid polymer solar cells fabricated with copper electrodes10.1021/am200067d ↗
37. The roles of poly(ethylene oxide) electrode buffers in efficient polymer photovoltaics10.1002/aenm.201100314 ↗
38. Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): performance improvement during long-time irradiation10.1016/j.solmat.2006.02.007 ↗
39. Oxygen release and exchange in niobium oxide MEHPPV hybrid solar cells10.1021/cm061429d ↗
40. Detrimental effect of inert atmospheres on hybrid solar cells based on semiconductor oxides10.1149/1.2716553 ↗
41. Light-driven oxygen scavenging by titania/polymer nanocomposite films10.1016/j.nainr.2003.08.010 ↗
42. Effect of oxygen on the electrical characteristics of field effect transistors formed from electrochemically deposited films of poly(3-methylthiophene)10.1088/0022-3727/24/11/019 ↗
43. Direct observation of electromigration-induced surface atomic steps in Cu lines by in situ transmission electron microscopy10.1063/1.2740109 ↗
44. Conjugated polymer surfaces and interfaces: a mini-review and some new results10.1016/S0379-6779(96)03692-2 ↗
45. Theoretical studies of the interaction between aluminum and poly(p-phenylenevinylene) and derivatives10.1063/1.467486 ↗