Use of inductively coupled plasma measurements to characterise light induced plating for silicon solar cells
Source abstract
Abstract
Abstract Light-induced plating (LIP) can be used to form self-aligned metal contacts to selective-emitter silicon solar cells. Although LIP of metal contacts is attractively simple, it is difficult to directly measure parameters, such as the average plating current density, which are required if the plating chemistry is to be optimised. In this paper we describe the use of inductively-coupled plasma (ICP) spectrometry techniques to characterise LIP of laser-doped selective-emitter silicon solar cells. The average plating current density and the effect of different anode and cathode configurations on the aluminium dissolution from the rear surfaces of the solar cells were evaluated. The quality of LIP nickel layers was also characterised using ICP measurements for various critical parameters in the cell design, such as the conductivity of the laser-doped grooves and the lateral resistance of the emitter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. B.S. Tjahjono, et al., High efficiency solar cell structure through the use of laser doping, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September, 2007, Milan, Italy, 2007, pp. 966–969.
2. L. Mai, et al., Rear junction laser doped solar cells on CZ n-Type silicon, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 7–12 June, 2009, Philadelphia, PA, 2009, pp. 1811–1815.10.1109/PVSC.2009.5411499 ↗
3. A. Sugianto, et al., 18.5% laser-doped solar cell on CZ p-type Silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 20–25 June, 2010, Honolulu, HI, 2010, pp. 689–694.10.1109/PVSC.2010.5616914 ↗
4. D. Kray, et al., Industrial LCP selective emitter solar cells with plated contacts, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 20–25 June, 2010, Honolulu, HI, 2010, pp. 667–671.10.1109/PVSC.2010.5616896 ↗
5. N.B. Mason, et al., Laser grooved buried grid Si solar cells from pilot line to 50 MWp manufacture in ten years, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, 7–11 October, 2002 Rome, Italy, 2002, pp. 227–229.
6. L.F. Durkee, Method of plating by means of light, 4144139, United States, 1979.
7. Electrochemical methods to analyse the light-induced plating process10.1007/s10800-009-0054-5 ↗
8. Advantages of photoplating for laser doped solar cells10.1002/pip.1072 ↗
9. J. Bartsch, et al., Progress in understanding the current paths and deposition mechanisms of light-induced plating and implications for the process, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 21–25 September, 2009, Hamburg, Germany, 2009, pp. 1469–1474.
10. Y. Yao, et al., Use of inductive-coupled-plasma measurements to monitor light-induced plating of silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference/5th World Conference on Photovoltaic Energy Conversion, 6–10 September, 2010, Valencia, Spain, 2010, pp. 2682–2687.
11. A. Sugianto, et al., Impact of emitter and laser-doped line conductivity on nickel light-induced plating, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference/5th World Conference on Photovoltaic Energy Conversion, 6–10 September, 2010, Valencia, Spain, 2010, pp. 2403–2407.
12. Inductively coupled plasma/optical emission spectrometry
13. Thomas · 2008
14. Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction10.1016/j.talanta.2009.04.066 ↗
15. F.R. Abou-Shakra, Biomedical applications of inductively coupled plasma mass spectrometry (ICP-MS) as an element specific detector for chromatographic separations, in: Handbook of Analytical Separations, Elsevier, 2003, pp. 351–371.10.1016/S1567-7192(03)80013-X ↗
16. An inventory of heavy metals inputs to agricultural soils in England and Wales10.1016/S0048-9697(03)00139-6 ↗
17. Popov · 2002
18. C. Vargel, Types of corrosion on aluminium, in: Corrosion of aluminium, Elsevier, 2004, pp. 113–121.10.1016/B978-008044495-6/50012-4 ↗
19. C. Vargel, The corrosion behaviour of aluminium alloys, in: Corrosion of aluminium, Elsevier, 2004, pp. 214.10.1016/B978-008044495-6/50016-1 ↗
20. Sulfamate nickel plating process
21. MacDermid · 2006
22. MacDermid · 2010
23. Rohm · 2009