journal article·2009-08

Spectral selectivity of composite enamel coatings on 321 stainless steel

Harlan J. Brown-Shaklee, William Carty, Doreen D. Edwards

Publisher page

Abstract

Abstract Composite porcelain-enamel coatings consisting of spinel-type transition-metal-oxide pigments embedded in a borosilicate-glass matrix were deposited on 321 stainless steel using screen-printing techniques and characterized using total reflectance over the spectral range of 200 nm to 25 μm. The composite coatings exhibited moderate spectral selectivity and excellent thermal stability at 450 °C. Solar absorptance (α) ranged from 0.82 to 0.90 and calculated thermal emittance at 500 °C (e) ranged from 0.46 to 0.79. Both depended on coating thickness and pigment volume concentrations. As an example, the highest solar selectivity was measured in a 0.9 μm coating with α and e (500 °C) being 0.82 and 0.46, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Transition Metal Oxide Nanomaterials · Calibration and Measurement Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Composite film selective-absorbers
2. C.E. Kennedy, Review of mid- to high-temperature solar selective absorber materials, Technical Report NREL/TP-520-31267, National Renewable Energy Laboratory, Golden, CO, July 2002.10.2172/15000706 ↗
3. Spectrally selective paint coatings: preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
4. Optical characterization and modeling of black pigments used in thickness-sensitive solar-selective absorbing paints10.1016/S0038-092X(01)00016-0 ↗
5. Spectrally selective silicon paint coatings: influence of pigment volume concentration ratio on their optical properties10.1016/0927-0248(95)00087-9 ↗
6. Application of the Kubelka–Munk theory for the determination of the optical properties of solar absorbing paints10.1016/S0300-9440(96)00659-5 ↗
7. Spectrally selective solar absorbers in different non-black colours10.1016/j.solmat.2004.04.010 ↗
8. Spectral selectivity of black and green painted surfaces10.1016/S0927-0248(99)00155-5 ↗
9. Coil-coating paints for solar collector panels [II]—FTIR spectroscopic investigations10.1016/0741-983X(90)90046-5 ↗
10. Coil-Coating paints for solar collector panels [I]—characterization and performance tests10.1016/0741-983X(90)90044-3 ↗
11. Thickness sensitive spectrally selective (TSSS) paint for solar collectors: optical properties, surface characterization and application properties10.1016/0165-1633(88)90050-0 ↗
12. FTIR spectroscopic investigations and the thermal stability of thickness sensitive spectrally selective (TSSS) paint coatings10.1016/0165-1633(91)90034-I ↗
13. Optimum thickness determination to maximise the spectral selectivity of black pigmented coatings for solar collectors10.1016/0040-6090(95)08023-6 ↗
14. Characterisation of high-temperature-resistant spectrally selective paints for solar absorbers10.1016/S0927-0248(98)00181-0 ↗
15. The preparation and testing of spectrally selective paints on different substrates for solar absorbers10.1016/S0038-092X(01)00059-7 ↗
16. Spectrally selective SnO2: F film on glass and black enamelled steel substrates: spray pyrolytical deposition and optical properties10.1016/0927-0248(92)90130-H ↗
17. Porcelain enamelled absorbers, coated by spectral selective tin oxide10.1115/1.3268171 ↗
18. Standard tables for terrestrial solar spectral irradiance at air mass 1.5 for a 37° tilted surface, ASTM Designation E 892-87, American Society for Testing and Materials, West Conshokocken, PA.