N-acyl-dithieno[3,2-b:2’,3’-d]pyrrole-based low bandgap copolymers affording improved open-circuit voltages and efficiencies in polymer solar cells
Source abstract
Abstract
Three distinct low bandgap copolymers are synthesized by the combination of N-(2′-propylpentanoyl)dithieno[3,2-b:2′,3′-d]pyrrole (DTP) and (fluorinated) 2,3-bis[5′-(2"-ethylhexyl)thiophen-2′-yl]quinoxaline (Qx) and these PDTPQx derivatives are investigated as electron donor materials in bulk heterojunction polymer solar cells. Due to the DTP N-acylation and the introduction of the Qx units, both the open-circuit voltage (Voc) and the short-circuit current density (Jsc) increase compared to previous devices based on DTP-type donor polymers. Organic solar cells with an average Voc of 0.67 V, a Jsc of 12.57 mA/cm2 and a fill factor of 0.54 are obtained, affording a power conversion efficiency of 4.53% (4.81% for the top-performing device),are cord value for(N-acyl-)DTP-based polymer solar cells devoid of special interlayer materials. Despite further enhancement of the Voc, the solar cell efficiency declines for the fluorinated PDTPQx copolymers because of the inability to achieve a finely intermixed bulk hetero junction blend anomorphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
2. Stability of polymer solar cells10.1002/adma.201104187 ↗
3. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
4. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
5. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
6. 25th Anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
7. Structural factors that affect the performance of organic bulk heterojunction solar cells10.1021/ma400924b ↗
8. 25th Anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
9. High performance photovoltaic applications using solution-processed small molecules10.1021/ar400088c ↗
10. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
11. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
12. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
13. Naphtadithiophene-naphthobisthiadiazole copolymers for solar cells: alkylation drives the polymer backbone flat and promotes efficiency10.1021/ja404064m ↗
14. Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells10.1002/adma.201303586 ↗
15. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
16. Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells10.1021/nl401758g ↗
17. Solution-processed small molecules using different electron linkers for high-performance solar cells10.1002/adma.201301716 ↗
18. Influence of the position of the side chain on crystallization and solar cell performance of DPP-based small molecules10.1021/cm4034484 ↗
19. Solution-processed, indacenodithiophene-based, small-molecule organic field effect transistors and solar cellsm10.1039/C4TC00721B ↗
20. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
21. Y. Liu, J. Zhao, Z. Li, C. Mu, W. Ma, H. Hu, K. Jiang, H. Lin, H. Ade, H. Yan, Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nat. Commun. http://dx.doi.org/:10.1038/ncomms6293
22. Enhanced performance of bulk heterojunction solar cells using block copoly(3-alkylthiophene)s10.1021/cm903783w ↗
23. Solar cells based on block copolymer semiconductor nanowires: effects of nanowire aspect ratio10.1021/nn1017632 ↗
24. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
25. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells of it10.1002/adma.201400384 ↗
26. Enhanced intrinsic stability of the bulk heterojunction active layer blend of polymer solar cells by varying the polymer side chain pattern10.1016/j.orgel.2013.12.006 ↗
27. Influence of fluorination and molecular weight on the morphology and performance of PTB7:PC71BM solar cells10.1021/jp501222w ↗
28. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
29. Fluorinated thienyl-quinoxaline-based D-π-A-type copolymer toward efficient polymer solar cells; synthesis, characterization, and photovoltaic properties, Polym
30. High open circuit voltage solution-processed tandem organic photovoltaic cells employing a bottom cell using a new medium band gap semiconducting polymer10.1021/cm401527b ↗
31. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
32. A simple and efficient route to N-functionalized dithieno[3,2-b:2′,3′-d]pyrroles: fused-ring building blocks for new conjugated polymeric systems10.1021/jo034078k ↗
33. Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles10.1016/j.tet.2004.10.106 ↗
34. N-functionalized poly(dithieno[3,2-b:2′,3′-d]pyrrole)s: Highly fluorescent materials with reduced band gaps10.1021/ma052490r ↗
35. Highly fluorescent oligothiophenes through the incorporation of cental dithieno[3,2-b:2′,3′-d]pyrrole units10.1021/ol052152a ↗
36. Highly disordered polymer field effect transistors: N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole-based copolymers with surprisingly high charge carrier mobilities10.1021/ja803077v ↗
37. Semiconducting polymers containing dithieno[3,2-b:2′,3′-d]pyrrole for organic thin-film transistors10.1021/ma802004e ↗
38. Copolymers of perylene diimide with dithienothiophene and dithienopyrrole as electron-transport materials for all-polymer solar cells and field-effect transistors10.1039/b907163f ↗
39. Dithienopyrrole-based donor-acceptor copolymers: low band-gap materials for charge transport, photovoltaics and electrochromism10.1039/B915940A ↗
40. Dithieno[3,2-b:2′,3′-d]pyrrole-based materials: Synthesis and application to organic electronics10.1016/j.progpolymsci.2013.04.004 ↗
41. Broadband absorbing bulk heterojunction photovoltaics using low-bandgap solution-processed quantum dots10.1021/nl1013663 ↗
42. Novel NIR-absorbing conjugated polymers for efficient polymer solar cells: effect of alkyl chain length on device performance10.1039/b818885h ↗
43. Diketopyrrolopyrrole-based semiconducting polymer for photovoltaic device with photocurrent response wavelengths up to 1.1µm10.1021/ma902398q ↗
44. Synthesis and photovoltaic properties of donor-acceptor copolymer based on dithienopyrrole and thienopyrroledione10.1002/macp.201000584 ↗
45. Synthesis, characterization, and photovoltaic property of a low band gap polymer alternating dithienopyrrole and thienopyrroledione units10.1016/j.polymer.2011.03.057 ↗
46. Dithienopyrrole-quinoxaline/pyridopyrazine donor-acceptor polymers: synthesis and electrochemical, optical, charge-transport, and photovoltaic properties10.1039/c0jm04290k ↗
47. Conjugated polymers based on 1,3-dithien-2-yl-thieno[3,4-c]pyrrole-4,6-dione: Synthesis, characterization, and solvent effects on photovoltaic performance
48. Solar cells based on semi-random P3HT analogues containing dithienopyrrole: influence of incorporating a strong donor10.1117/1.JPE.2.021002 ↗
49. Synthesis and characterization of copolymers based on benzotriazoles and different atom-bridged dithiophenes for efficient solar cells10.1039/c3py21099e ↗
50. Tamilavan · Polymer · 2013 · 54 · 319810.1016/j.polymer.2013.04.049 ↗
51. Synthesis and photovoltaic properties from inverted geometry cells and roll-to-roll coated large area cells from dithienopyrrole-based donor-acceptor polymers10.1039/C2TA00695B ↗
52. Synthesis and properties of D-A copolymers based on dithienopyrrole and benzothiadiazole with various numbers of thienyl units as spacers10.1039/C4PY00975D ↗
53. Small-bandgap semiconducting polymers with high near-infrared photoresponse10.1021/ja506265h ↗
54. Dithienopyrrole-based oligothiophenes for solution-processed organic solar cells10.1039/c3cc46066e ↗
55. Acceptor-donor-acceptor oligormers containing dithieno[3,2-b:2′,3′-d]pyrrole and thieno[2,3-c]pyrrole-4,6-dione units for solution-processed organic solar cells10.1021/ol500809e ↗
56. New molecular donors with dithienopyrrole as electron-donating group for efficient small molecule organic solar cells10.1021/cm5018147 ↗
57. Small molecule BODIPY dyes as non-fullerene acceptors in bulk heterojunction organic photovoltaics10.1039/C3CC49648A ↗
58. N-acyldithieno[3,2-b:2′,3′-d]pyrroles: Second generation dithieno[3,2-b:2′,3′-d]pyrrole building blocks with stabilized energy levels10.1021/ol101647f ↗
59. Electron-deficient N-alkyloyl derivatives of thieno[3,4-c]pyrrole-4,6-dione yield efficient polymer solar cells with open-circuit voltage>1V10.1021/cm5002303 ↗
60. N-acyldithieno[3,2-b:2′,3′-d]pyrrole-based low-band-gap conjugated polymer solar cells with amine-modified [6,6]-phenyl-C61-butyric acid ester cathode interlayers10.1021/am4032289 ↗
61. Enhanced open-circuit voltage in polymer solar cells by dithieno[3,2-b:2′,3′-d]pyrrole N-acylation10.1039/C4TA00525B ↗
62. Quinoxaline-based π-conjugated donor polymer for highly efficient organic thin-film solar cells10.1063/1.3202393 ↗
63. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
64. High-efficiency polymer solar cells with a cost-effictive quinoxaline polymer through nanoscale morphology control induced by practical processing additives10.1039/c3ee00110e ↗
65. Molecular orbital energy level modulation through incorporation of selenium and fluorine into conjugated polymers for organic photovoltaic cells10.1039/c3ta13040a ↗
66. Indacenodithiophene and quinoxaline-based conjugated polymers for highly efficient polymer solar cells10.1021/cm200316s ↗
67. Quinoxaline derivatives with broadened absorption patterns10.1039/c3ob41059e ↗
68. Synthesis of fluorinated analogues of a practical polymer TQ for improved open-circuit voltages in polymer solar cells10.1039/c3py01542d ↗
69. A rapid-scanning differential scanning calorimeter
70. Calibration and performance of a fast-scanning DSC-Project RHC10.1016/j.tca.2011.12.001 ↗
71. Bard · 2001
72. The absolute electrode potential: an explanatory note10.1351/pac198658070955 ↗
73. Amphiphilic N-methylimidazole-functionalized diblock copolythiophenes for organic photovoltaics10.1016/j.eurpolymj.2014.01.028 ↗
74. Synthesis of fluorinated polythienothiopene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties10.1021/ja108601g ↗
75. Exchange-correlation functional with broad accuracy for metallic and nonmetallic compounds, kinetics, and noncovalent interactions10.1063/1.2126975 ↗
76. Quantum mechanical continuum solvation models10.1021/cr9904009 ↗
77. Frisch · 2009
78. Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells10.1038/ncomms3867 ↗