Efficient inverted polymer solar cells based on surface modified FTO transparent electrodes
Source abstract
Abstract
Abstract Nano-textured transparent electrodes are commonly used to receive higher light absorption in inverted polymer solar cells (IPSC). However, the performance of the device is often restricted by the highly rough morphology of the textured transparent electrode. In this work, a Polyvinylpyrrolidone (PVP) interlayer was inserted as a surface modifier in IPSCs based on a fluorine-doped SnO 2 electrode (FTO). The inserted layer facilitates electron extraction due to improved interface morphology of the AZO electron transport layer (ETL). This enhancement resulted in an approximately 63% increase in power conversion efficiency from 2.52% to 4.14% of IPSCs based on the FTO electrode compared to solar cells without PVP layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
7. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison10.1016/S0379-6779(99)00354-9 ↗
8. Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: the relation between the anode physical, chemical,and morphological properties and the device performance10.1063/1.368981 ↗
9. Gallium-doped zinc oxide films as transparent electrodes for organic solar cell applications10.1063/1.2750410 ↗
10. ZnO–Ag–MoO3 transparent composite electrode for ITO-free, PEDOT: PSS-free bulk-heterojunction organic solar cells10.1016/j.solmat.2013.07.009 ↗
11. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
12. Low resistance and highly transparent ITO-Ag- ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
13. Efficient polymer solar cells based on light-trapping transparent electrodes10.1063/1.3691906 ↗
14. Solution-processed nanostructured zinc oxide cathode interfacial layers for efficient inverted organic photovoltaics10.1016/j.mee.2014.03.006 ↗
15. Effect of UV light irradiation on photovoltaic characteristics of inverted polymer solar cells containing sol–gel zinc oxide electron collection layer10.1016/j.orgel.2012.11.013 ↗
16. Efficient light-trapping in inverted polymer solar cells based on textured FTO transparent electrodes10.1016/j.matlet.2014.05.064 ↗
17. TCO and light trapping in silicon thin film solar cells10.1016/j.solener.2004.03.015 ↗
18. Highly organic photovoltaic devices using F-doped SnO2 anodes10.1063/1.3569758 ↗
19. Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell10.1016/j.orgel.2012.01.011 ↗
20. Charge transport in flexible solar cells based on conjugated polymer and ZnO nanoparticulate thin films10.1039/C0JM02184A ↗
21. The role of buffer layers in polymer solar cells, Energy
22. Toward high-stability inverted polymer solar cells with an electrodeposited ZnO electron transporting layer10.1002/aenm.201100632 ↗
23. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
24. Electrospun ZnO nanowire plantations in the electron transport layer for high efficiency inverted organic solar cells10.1021/am4013853 ↗
25. Inverted polymer solar cells with a boron-doped zinc oxide layer deposited by metal organic chemical vapor deposition10.1016/j.solmat.2013.07.015 ↗
26. Comparison of various sol-gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
27. Ozaki, Influences of dopant concentration in sol-gel derived AZO layer on the performance of P3HT: PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
28. Influence of surface roughness of aluminum-doped zinc oxide buffer layers on the performance of inverted organic solar cells10.1063/1.3537961 ↗
29. Improved inverted organic solar cells with a sol–gel derived indium-doped zinc oxide buffer layer10.1109/JSTQE.2009.2039200 ↗
30. High performance inverted organic solar cells with solution processed Ga-doped ZnO as an interfacial electron transport layer10.1039/c3tc31650e ↗
31. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
32. Enhanced performance of inverted polymer solar cells by using poly(ethyleneoxide)-modified ZnO as an electron transport layer10.1021/am302408w ↗
33. Influence of ZnO interlayer on the performance of inverted organic photovoltaic device10.1016/j.solmat.2011.03.011 ↗
34. Influences of dopant concentration in sol-gel derived AZO layer on the performance of P3HT: PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
35. Increasing the fill factor of inverted P3HT: PCBM solar cells through surface modification of Al‐doped ZnO via phosphonic acid-anchored C60 SAMs10.1002/aenm.201100668 ↗
36. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
37. Self-assembled monolayer modified ZnO/metal bilayer cathodes for polymer/fullerene bulk-heterojunction solar cells10.1063/1.2919524 ↗
38. Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable organic photovoltaic cells10.1039/c3ta10537g ↗
39. Preparation and properties of transparent conductive aluminum-doped zinc oxide thin films by sol–gel process10.1116/1.1340659 ↗
40. Effect of sol-gel derived ZnO annealing rate on light-trapping in inverted polymer solar cells10.1016/j.matlet.2013.06.063 ↗
41. Effective light trapping enhanced near-UV/blue light absorption in inverted polymer solar cells via sol–gel textured Al-doped ZnO buffer layer Sol10.1016/j.solmat.2013.10.032 ↗
42. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
43. Understanding light trapping by light scattering textured back electrodes in thin film n-i-p-type silicon solar cells10.1063/1.2751117 ↗