journal article·2015-11

Progress in fine-line metallization by co-extrusion printing on cast monosilicon PERC solar cells

L. Philipp Richter, Gerd Fischer, Lamine Sylla, Melanie Hentsche, Stefan Steckemetz, Matthias Müller, Corie L. Cobb, Scott E. Solberg, Ranjeet Rao, Scott Elrod, Phedon Palinginis, Eric Schneiderlöchner, D. Holger Neuhaus

Publisher page

Abstract

Abstract In this paper, we present our progress in co-extrusion printing for fine-line metallization. With this technique, 30 µm wide and 20 µm tall front grid fingers are currently printed. Applied to industrial size cast silicon PERC solar cells, a world record conversion efficiency of 21.42% has been demonstrated. This result was achieved with a production-ready co-extrusion printer that runs at a throughput of 2700 wafers per hour. Furthermore, a printhead is presented that has been developed to enable co-extrusion printing on pseudo-square wafers. Finally the cost advantage of the technology is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. B. Min, et al., Incremental efficiency improvements of mass-produced PERC cells up to 24% predicted solely with continuous development of existing technologies and wafer materials, in: Proceedings of 31st EU-PVSEC, Hamburg, 2015.
2. H. Hannebauer, et al., Optimized stencil print for low Ag paste consumption and high conversion efficiencies, Metallization Workshop, Konstanz, 2014.10.1016/j.egypro.2015.03.294 ↗
3. M. Pospischil, et al., Dispensing technology on the route to an industrial metallization process, Metallization Workshop, Konstanz, 2014.10.1016/j.egypro.2015.03.297 ↗
4. Fine line metallization by novel co-extrusion technology for next generation solar cells10.1016/j.solmat.2014.06.006 ↗
5. Casting single crystal silicon: novel defect profiles from BP solar's mono2TM-wafers10.4028/www.scientific.net/SSP.131-133.1 ↗
6. Defect formation induced by seed-joints during directional solidification of quasi-mono-crystalline silicon ingots10.1016/j.jcrysgro.2014.08.002 ↗
7. Simulation based development of industrial PERC cell production beyond 20.5% efficiency10.1016/j.egypro.2014.08.122 ↗
8. Cast silicon of varying purity for high efficiency PERC solar cells10.1016/j.egypro.2014.08.034 ↗
9. Hydrodynamic focusing on a silicon chip: mixing nanoliters in microseconds10.1103/PhysRevLett.80.3863 ↗
10. Modeling mass and density distribution effects on the performance of co-extruded electrodes for high energy density lithium-ion batteries10.1016/j.jpowsour.2013.10.084 ↗
11. Analytical modeling of industrial-related silicon solar cells10.1109/JPHOTOV.2013.2281105 ↗