Quantitative theoretical and experimental analysis of alloying from screen-printed aluminum pastes on silicon surfaces
Source abstract
Abstract
Abstract In this study, we present detailed theoretical and experimental investigations on full-area alloying from screen-printed aluminum pastes on silicon surfaces for solar cell applications. We introduce a simple analytical model for the description of the alloying process derived from existing models for evaporated Al layers, which we adapt to printed Al pastes. Thereby, we particularly account for the recrystallization of Si within the paste particles, which we refer to as parasitic Si recrystallization. Applying our model, we demonstrate good accordance of calculated with measured eutectic layer thicknesses. We show that the model can be versatilely used to investigate screen-printed Al-alloyed contacts in detail: We demonstrate that the latent heat of the Al paste significantly influences the alloying process. Thus, the effective peak temperature of the alloying process can be several 100 °C below the set peak temperature of the firing furnace. By combining calculations of the effective peak temperature with measurements of the Al doping concentration, we determine a parameterization of the solid solubility of Al in Si down to the eutectic temperature of 577 °C. Our investigations therefore provide improved understanding of alloying from printed Al pastes and enable the specific optimization of Al-alloyed contacts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. E. Ralph, Recent advancements in low cost solar cell processing, In: Proceedings of the 11th IEEE PVSC, Scottsdale, USA, 1975, p. 315.
2. The effects of alloying material on regrowth-layer structure in silicon power devices10.1007/BF00550012 ↗
3. F. Huster, Investigation of the alloying process of screen-printed aluminium pastes for the formation on silicon solar cells, In: Proceedings of the 20th EPVSEC., Barcelona, Spain, 2005, p. 1466.
4. Electron microscopy analysis of crystalline silicon islands formed on screen-printed aluminum-doped p-type silicon surfaces10.1063/1.2963192 ↗
5. Factors limiting the formation of uniform and thick aluminium-back-surface field and its potential10.1149/1.2129106 ↗
6. V.A. Popovich, M. Janssen, I.M. Richardson, T. van Amstel, I.J. Bennett, Microstructure and mechanical properties of aluminium back contact layers, In: Proceedings of the 24th EPVSEC, Hamburg, Germany, 2009, p. 1453.
7. Further analysis of aluminum alloying for the formation of p+ regions in silicon solar cells10.1016/j.egypro.2011.06.124 ↗
8. Microstructural and electrical properties of different-sized aluminum-alloyed contacts and their layer system on silicon surfaces10.1016/j.solmat.2011.03.017 ↗
9. M.P. Godlewski, C.R. Baraona, H.W. Brandhorst, Low high junction theory applied to solar cells, In: Proceedings of the 10th IEEE Photovoltaic Spec. Conference., Palo Alto, CA, 1973, pp. 40–49.
10. P. Lölgen, C. Leguijt, J.A. Eikelboom, R.A. Steeman, W.C. Sinke, L.A. Verhoef, P.F.A. Alkemade, E. Algra, Aluminium back surface field doping profiles with recombination velocities below 200 cm/s, In: Proceedings of the 23rd IEEE PVSC, Louisville, USA, 1993, pp. 236-242.10.1109/PVSC.1993.347046 ↗
11. F. Huster, G. Schubert, ECV doping profile measurement of aluminum alloyed back surface fields, In: Proceedings of the 20th EPVSEC, Barcelona, Spain, 2005, pp. 1462–1465.
12. M. Rauer, C. Schmiga, M. Hermle, S.W. Glunz., Passivation of screen-printed aluminium-alloyed emitters for back junction n-type silicon solar cells, In: Proceedings of the 24th EPVSEC, Hamburg, Germany, 2009, p. 1059.
13. Effect of incomplete ionization for the description of highly aluminum-doped silicon10.1063/1.3603043 ↗
14. Incomplete ionization of aluminum in silicon and its effect on accurate determination of doping profiles10.1063/1.4833242 ↗
15. Operating limits of Al-alloyed high-low junctions for BSF solar cells10.1016/0038-1101(81)90038-1 ↗
16. J.-.F. Nekarda, M. Hörteis, F. Lottspeich, A. Wolf, R. Preu, Comparison of three different metallization concepts for LFC cells, In: Proceedings of the 25th EPVSEC, Valencia, Spain, 2010, p. 2245.
17. Formation of highly aluminum-doped p-type silicon regions by in-line high-rate evaporation10.1016/j.solmat.2011.01.039 ↗
18. In-situ transmission electron microscopy investigation of surface-oxide, stress-relief mechanisms during melting of sub-micrometer Al–Si alloy particles10.1016/j.msea.2003.10.315 ↗
19. M. Balucani, K. Kholostov, P. Nenzi, L. Serenelli, M. Izzi, M. Tucci, M. Miliciani, F. Mura, Aluminum-silicon interdiffusion in screen printed metal contacts for silicon based solar cells applications, presented at 4th Metallization Workshop, Constance, Germany, 2013.10.1016/j.egypro.2013.11.094 ↗
20. The Grain Refining Of Aluminum And Phase Relationships in the Al-Ti-B system10.1007/BF02645112 ↗
21. The Al-Si System10.1007/BF02868729 ↗
22. Rauer · 2015
23. Surface tension and density of oxygen-free liquid aluminum at high temperature10.1023/A:1022466319501 ↗
24. Structural and mechanical properties of Al–Si alloys obtained by fast cooling of a levitated melt10.1016/j.msea.2004.07.037 ↗
25. Investigation of aluminum-boron doping profiles formed by coalloying from screen-printed pastes10.1016/j.egypro.2013.11.093 ↗
26. The latent heat of fusion of some metals10.1088/1478-7814/38/1/343 ↗
27. The melting behavior of aluminum nanoparticles10.1016/j.tca.2007.07.007 ↗
28. Krauß · 2012 · 39
29. Solid solubilities and thermodynamic properties of aluminum in solid silicon10.1149/1.1588300 ↗
30. Diffusion of aluminum in single crystal silicon10.1063/1.1722283 ↗
31. Semiconductor properties of recrystallized silicon in aluminum alloy junction diodes10.1063/1.1722640 ↗
32. Retrograde solubility of aluminum in silicon10.1063/1.1722869 ↗
33. Theoretical and experimental investigation of aluminum-boron-codoping of silicon10.1002/pip.2663 ↗
34. Mechanism for secondary electron dopant contrast in the SEM10.1093/oxfordjournals.jmicro.a023811 ↗
35. Adapted parameterization of incomplete ionization in aluminum-doped silicon and impact on numerical device simulation10.1063/1.4913255 ↗