journal article·2016-02

Double-layered Ag–Al back reflector on stainless steel substrate for a-Si:H thin film solar cells

Kwang Hoon Jung, Sun Jin Yun, Seong Hyun Lee, Yoo Jeong Lee, Kyu-Sung Lee, Jung Wook Lim, Kyoung-Bo Kim, Moojin Kim, R.E.I. Schropp

Publisher page

Abstract

An effective light trapping method for substrate-type hydrogenated amorphous silicon (a-Si:H) thin film solar cells is the use of a back reflector (BR) of high roughness, e.g., ‘hot silver’, which is deposited at temperatures higher than 450 °C. In this work, textured silver-aluminum (Ag–Al) BR films were fabricated by depositing Ag on Al film at Ag-deposition temperatures (TAg) ranging from 25 to 350 °C. The surface morphology and roughness of Ag–Al films were strongly affected by TAg. The Al and Ag films were formed entirely of Ag2Al alloy at TAg of 330 °C or higher, while the Ag–Al films maintained a double-layered structure at 290 °C or below. Although the films did not undergo alloying at TAg of 290 °C, the Ag–Al films have a well-developed surface structure with high diffuse-reflectance, compared to Ag films deposited at the same temperature. The conversion efficiency of an a-Si:H thin film solar cell on a flexible stainless steel substrate increased from 7.63% to 8.44% as TAg was increased from 25 to 290 °C, as a result of more effective light scattering by Ag–Al BRs, producing increased short-circuit current. However, at higher TAg, Ag2Al alloy films with sharp crystallite edges were formed, and were not appropriate as BRs. The present work clearly shows that double-layered Ag–Al films fabricated at temperatures as low as 290 °C could be useful back reflectors for substrate-type thin film solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Optical Coatings and Gratings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Photovoltaic technology: the case for thin-film solar cells10.1126/science.285.5428.692 ↗
2. Street · 1991 · 224
3. Thickness dependence of light-induced effects in a-Si solar cells10.1016/0379-6787(91)90003-8 ↗
4. Performance and stability of Si:H p–i-–n solar cells with i layers prepared at the thickness-dependent amorphous-to-microcrystalline phase boundary10.1063/1.124752 ↗
5. Study of back reflectors for amorphous silicon alloy solar cell application10.1063/1.347418 ↗
6. Efficiency enhancement in Si solar cells by textured photonic crystal back reflector10.1063/1.2349845 ↗
7. Back surface reflectors with periodic textures fabricated by self-ordering process for light trapping in thin-film microcrystalline silicon solar cells10.1016/j.solmat.2008.12.030 ↗
8. Light trapping and optical losses in microcrystalline silicon pin solar cells deposited on surface-textured glass/ZnO substrates
9. Effect of nanotextured back reflectors on light trapping in flexible silicon thin-film solar cells10.1016/j.solmat.2012.03.031 ↗
10. Surface texturing of sputtered ZnO:Al/Ag back reflectors for flexible silicon thin-film solar cells
11. Understanding light trapping by light-scattering textured back electrodes in thin-film n-i-p silicon solar cells10.1063/1.2751117 ↗
12. Light trapping in hydrogenated amorphous and nanocrystalline silicon thin film solar cells
13. Photocurrent enhancement in thin film amorphous silicon solar cells with silver nanoparticles10.1002/pip.1015 ↗
14. Plasmonic light trapping in thin-film silicon solar cells with improved self-assembled silver nanoparticles10.1021/nl301521z ↗
15. High roughness Ag back reflector on metal under-layer for thin film solar cell applications10.1016/j.materresbull.2013.07.032 ↗
16. Microstructural evolution during film growth10.1116/1.1601610 ↗
17. The microstructure of sputter deposited coatings10.1116/1.573628 ↗
18. Correlation between texture and average grain size in polycrystalline Ag thin films10.1016/S0040-6090(99)00691-4 ↗
19. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
20. Fabrication of dc sputtered Ag/Al:Si bilayers with improved optical reflectance
21. Absorption loss at nanorough silver back reflector of thin-film silicon solar cells10.1063/1.1633652 ↗
22. Mechanism of shunting of nanocrystalline solar cells deposited on rough Ag/ZnO substrates10.4028/www.scientific.net/SSP.131-133.27 ↗