Gettering effects by aluminum upon the dark and illuminated I–V characteristics of N + –P–P + silicon solar cells
Source abstract
Abstract
Abstract Impurity gettering is an essential process step in silicon solar cell technology. A widely used technique to enhance silicon solar cell performance is the deposition of an aluminum layer on the back surface of the cell, followed by a thermal annealing. The aluminum thermal treatment is typically done at temperatures around 600°C for short times (10–30 min). Seeking a new approach of aluminum annealing at the back of silicon solar cells, a systematic study about the effect the above process has on dark and illuminated I–V cell characteristics is reported in this paper. We report results on silicon solar cells where annealing of aluminum was done at two different temperatures (600°C and 800°C), and compare the results for cells with and without aluminum alloying. We have shown that annealing of the aluminum in forming gas at temperatures around 800°C causes improvement of the electrical cell characteristics. We have also made evident that for temperatures below ∼250 K, the predominant recombination process for our cells is trap-assisted carrier tunneling for both annealing temperatures, but it is less accentuated for cells with annealing of aluminum at 800°C. For temperatures above ∼250 K, the recombination proceeds through Shockley–Read–Hall trap levels, for cells annealed at both temperatures. Furthermore, it seems from DLTS measurements that there is gettering of iron impurities introduced during the fabrication processes. The transport of impurities from the bulk to the back surface (alloyed with aluminum) reduces the dark current and increases the effective diffusion length as determined from dark I–V characteristics and from spectral response measurements, respectively. All these effects cause a global efficiency improvement for cells where aluminum is annealed at 800°C as compared to conventional cells where the annealing was made at 600°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. del Alamo · Solid State Electron. · 1981 · 24 · 41510.1016/0038-1101(81)90038-1 ↗
2. Chen · J. Appl. Phys. · 1992 · 71 · 585810.1063/1.350482 ↗
3. S. Narasimha, A. Rohatgi, Optimized aluminum back surface field techniques for silicon solar cells, Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, CA, 1997, p. 63.10.1109/PVSC.1997.653925 ↗
4. B. Hartiti, J.C. Muller, A. Slaqui, P. Siffert, D. Sarti, Back surface field-induced gettering in multicrystalline silicon, Proceedings of the 22nd IEEE Photovoltaic Specialists Conference, Las Vegas, NV, 1991, p. 998.10.1109/PVSC.1991.169359 ↗
5. H. Hieslmair, S. McHugo, E.R. Weber, Aluminum backside segregation gettering, Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington, DC 1996, p. 441.10.1109/PVSC.1996.564038 ↗
6. G. Santana, A. Morales-Acevedo, Determination of the optimum silane to ammonia ratio for PECVD SiN:H films used as passivation layers in silicon solar cells, Proceedings of the Second World Conference on Photovoltaic Solar Energy Conversion, Vienna, Austria 1998, p. 2422.
7. Charles · J. Phys. D · 1985 · 18 · 226110.1088/0022-3727/18/11/015 ↗
8. Davis · IEEE Trans. Electron Devices · 1980 · ED-27 · 67710.1109/T-ED.1980.19922 ↗
9. Schroder · 1990