journal article·2014-04Open access

Horizontally oriented molecular thin films for application in organic solar cells

Toshinori Matsushima, Hitoshi Matsuo, Tetsuo Yamamoto, Akichika Nakao, Hideyuki Murata

Abstract

Abstract The authors investigate the influence of molecular orientation of p -type molecules of alpha-sexithiophene (α-6T) and n -type molecules of 3,4,9,10-perylene tetracarboxylic bisbenzimidazole (PTCBI) on organic solar cell (OSC) performance. Deposition of α-6T and subsequently PTCBI on an α-6T buffer surface rubbed with a nylon cloth allows their horizontal orientations to be formed in separate layers. Power conversion efficiency and operation stability of a rubbed OSC are markedly improved when compared with an unrubbed OSC. The improved OSC performance is confirmed to be due to increases in light absorption, exciton diffusion length, energy difference between the p -type and n -type layers, and carrier collection by electrodes, which are caused by the rubbing-induced double horizontal orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A field-effect transistor based on conjugated alpha-sexithienyl10.1016/0038-1098(89)90121-X ↗
2. Three-dimensional band structure and band like mobility in oligoacene single crystals: a theoretical investigation10.1063/1.1539090 ↗
3. Orientation-controlled organic electroluminescence of p-sexiphenyl films10.1063/1.119331 ↗
4. Structural templating as a route to improved photovoltaic performance in copper phthalocyanine/fullerene (C60) heterojunctions10.1063/1.2821229 ↗
5. Increased light outcoupling efficiency in dye-doped small molecule organic light-emitting diodes with horizontally oriented emitters10.1016/j.orgel.2011.02.005 ↗
6. Photovoltaic properties of octithiophene-based Schottky and p/n junction cells: influence of molecular orientation10.1016/S0927-0248(00)00021-0 ↗
7. Molecular orientation dependence of hole-injection barrier in pentacene thin film on the Au surface in organic thin film transistor10.1063/1.2227712 ↗
8. Molecular orientation-dependent ionization potential of organic thin films10.1021/cm8016352 ↗
9. Orientation-dependent ionization energies and interface dipoles in ordered molecular assemblies10.1038/nmat2119 ↗
10. Molecular order, charge injection efficiency and the role of intramolecular polar bonds at organic/organic heterointerfaces10.1016/j.orgel.2012.05.038 ↗
11. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
12. Enhancement of hole injection and electroluminescence characteristics by a rubbing-induced lying orientation of alpha-sexithiophene10.1063/1.4735402 ↗
13. Organic solar cells with remarkable enhanced efficiency by using a CuI buffer to control the molecular orientation and modify the anode10.1063/1.3483159 ↗
14. Graphoepitaxy of sexithiophene and orientation control by surface treatment10.1063/1.2913180 ↗
15. Highly oriented thin films of poly(tetrafluoroethylene) as a substrate for oriented growth of materials10.1038/352414a0 ↗
16. Polarized electroluminescence from oriented p-sexiphenyl vacuum-deposited film10.1063/1.114599 ↗
17. Transparent image sensors using an organic multilayer photodiode10.1002/adma.200600163 ↗
18. Horizontal molecular orientation in vacuum-deposited organic amorphous films of hole and electron transport materials10.1063/1.2996258 ↗
19. High-efficiency simple planar heterojunction organic thin-film photovoltaics with horizontally oriented amorphous donors10.1016/j.solmat.2011.10.014 ↗
20. Exciton diffusion lengths of organic semiconductor thin films measured by spectrally resolved photoluminescence quenching10.1063/1.3079797 ↗
21. Effect of molecular packing on the exciton diffusion length in organic solar cells10.1063/1.2783202 ↗
22. Optical, morphological, structural, electrical, molecular orientation, and electroluminescence characteristics of organic semiconductor films prepared at various deposition rates10.1016/j.tsf.2011.09.060 ↗
23. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostructure photovoltaic diodes
24. Enhanced charge-carrier injection caused by molecular orientation10.1063/1.3602925 ↗
25. Electronic spectra of self-organized oligothiophene films with standing and lying molecular units10.1016/S0040-6090(95)08320-0 ↗
26. Orientation and mobility in ultrathin oligothiophene films: UV–vis, IR and fluorescence studies10.1016/0379-6779(93)91212-K ↗
27. Transfer mechanisms of electronic excitation10.1039/DF9592700007 ↗
28. ϕ was roughly estimated to be ≈0.025% (α-6T) and ≈0.003% (PTCBI) from comparing absorbance at an excitation light wavelength and areas of PL spectra of α-6T and PTCBI with those of tris(8-hydroxyquinoline)aluminum (Alq3) having η of 18% [Ref. T. Matsushima, K. Shiomura, S. Naka, H. Murata, Optical, morphological, structural, electrical, molecular orientation, and electroluminescence characteristics of organic semiconductor films prepared at various deposition rates, Thin Solid Films 520 (2012) 2283–2288.]. ϕ of α-6T and PTCBI seemed not to be largely dependent on their molecular orientations.
29. Orange and red organic light-emitting devices using aluminum tris(5-hydroxyquinoxaline)10.1016/S0379-6779(98)80034-9 ↗
30. Refractive index, optical bandgap and oscillator parameters of organic films deposited by vacuum evaporation technique10.1016/j.vacuum.2008.11.010 ↗
31. εA was calculated from absorption spectra and film thickness of PTCBI and CuPc acceptors deposited on fused silica substrates and their film density ρ and molecular mass. We used ρ=1.64gcm−3 for CuPc, which was reported in following reference (H.-F. Xiang, Z.-X. Xu, V.A.L. Roy, C.-M. Che, P.T. Laia, Method for measurement of the density of thin films of small organic molecules, Rev. Sci. Instrum. 78 (2007) 034104-1–034104-5.). To calculate ρ of PTCBI, PTCBI film of 100nm (setting thickness) was vacuum-deposited on fused silica substrate with quartz crystal microbalance where ρ of 1.1gcm−3, tooling factor of 100%, and z-ratio of 1 were set. Since fused silica substrate was placed very close to quartz crystal microbalance inside a vacuum evaporator, thickness of PTCBI deposited on quartz crystal microbalance is the same as that of PTCBI deposited on fused silica surface. Actual thickness measured from PTCBI deposited on fused silica substrate was 84nm from AFM analysis. Thus actual ρ of PTCBI was calculated to be 1.31gcm−3 from product of setting ρ 1.1gcm−3 and ratio of setting thickness 100nm/actual thickness 84nm.
32. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
33. Nanostructured interfaces in polymer solar cells10.1063/1.3458809 ↗
34. Interface electronic structure between organic semiconductor film and electrode metal probed by photoelectron yield spectroscopy10.1016/j.orgel.2011.11.024 ↗
35. Design rules for donors in bulk-heterojunction solar cells towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
36. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗