journal article·2014-12

Fine line metallization by coextrusion technology for next generation solar cells

M. Beutel, A. Lewis, M. Prondzinski, F. Selbmann, P. Richter, F. Bamberg, P. Raschtschepkin, A. Krause, C. Koch, M. Hentsche, K.-H. Stegemann, E. Schneiderlöchner, H. Neuhaus

Publisher page

Abstract

Abstract This paper introduces the application of a coextrusion printing as a contact and mask-free fine line metallization technology for direct printing of narrow grid lines with a strongly enhanced aspect ratio. Coextrusion printed grid lines enhance short circuit current and lower series resistance through a higher number of filigree fingers. The silver and sacrificial paste that merge inside the nozzle are simultaneously extruded onto the wafer and form a silver paste structure smaller than every design feature inside the nozzle. After contact firing the grid lines become as narrow as 35 µm with an aspect ratio up to 0.7. A further shrinkage potential down to 23.7 µm width with an aspect ratio up to 0.62 has been demonstrated. Coextrusion printed grid lines outperform screen printed grid lines in a whole slew of geometrical and optical properties. As for example grid line width and height variation is as low as ±0.5 µm and the optical effective finger width is far smaller than the screen printed effective finger width. Due to these low effective finger widths the absolute effective shading of 96 coextrusion printed grid lines is less than half of the 80 screen printed grid lines. The calculated short circuit current gain, due to the lower effective shading was experimentally confirmed accordingly. Furthermore a benchmark test in a production like environment was performed. Hereby an absolute cell efficiency gain of +0.25% over screen printed metallization was confirmed and a cell efficiency gain of over +0.35% to +0.4% abs. can be assumed to be achieved by using a direct contacting coextrusion silver paste, which is comparable to state of the art screen printing pastes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Novel structures by microlayer coextrusion:talc-filled PP, PC/SAN, and HDPE/LLDPE10.1002/pen.11678 ↗
2. Microfabrication of ceramics by co-extrusion10.1111/j.1151-2916.1998.tb02307.x ↗
3. T. FalconAspect ratio improvements for printed frontside conductors on silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 21–25 September, Hamburg, Germany, 2009
4. T. Falcon,Ultra fine line frontside metallization on crystalline silicon solar cells by screen and stencil printing, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany
5. H. Hannebauer, T. Dullweber, T. Falcon, R. Brendel; “Fineline printing options for high efficiencies and low Ag paste consumption, in: Proceedings of Energy Procedia , SiliconPV Conference, March 25–27 , Hamelin, Germany, 2013.10.1016/j.egypro.2013.07.339 ↗
6. M. Pospischil, M. Klawitter, M. Kuchler, J. Specht, H. Gentischer, R. Efinger, C. Kroner, M. Luegmair, M. König, M. Hörteis, C. Mohr, L. Wende, J. Lossen, M. Weiß, O. Doll, I. Koehler, R. Zengerle, F. Clement, D. Biro; “Process development for a high-throughput fine line metallization approach based on dispensing technology, in: Proceedings of the 4th Workshop on Metallization for Crystalline Silicon Solar Cells, Konstanz, Germany, 2013.10.1016/j.egypro.2014.02.001 ↗
7. H. Hannebauer, T. Dullweber, T. Falcon, X. Chen, R. Brendel; “Record low Ag paste consumption of 67.7mg with dual print,in: Proceedings of the 4th Workshop on Metallization for Crystalline Silicon Solar Cells, Konstanz, Germany, 2013.10.1016/j.egypro.2013.11.089 ↗
8. T. Falcon; Ultra fine line printing for silicon solar cells… mesh screens or metal stencils? in: Proceedings of the 3rd Metallization Workshop, October 2011, Charleroi, Belgium, 2011
9. Electrical properties of fine line printed and light-induced plated contacts on silicon solar cells10.1002/pip.938 ↗
10. A. Filipovic, S. Binder, M. Hörteis, D. Schmidt, J.J. Merkel, S.W. Glunz; “Electrical properties of aerosol printed contacts, in: Proceedings of the 24th EUPVSEC, Hamburg, Germany, 2009 pp. 1475–1478.
11. Capitalizing on the glass-etching effect of silver plating chemistry to contact Si solar cells with homogeneous 100-110 Ohm/sq emitters10.1109/LED.2011.2131115 ↗
12. On the ink jetting of full front Ag grid lines for cost-effective metallization of Si solar cells10.1109/LED.2012.2186553 ↗
14. F. Benner; Einfluss der gridfingergeometrie auf den modulwirkungsgrad (Master thesis), Technische Universität Bergakademie Freiberg, Freiberg, Germany, 2009.
15. T. Fellmeth, F. Clement, D. Biro, “Analytical modeling of industrial-related silicon solar cells” IEEE J. Photovolt. 2013, 2156-338, http://dx.doi.org/10.1109/JPHOTOV.2013.228110510.1109/JPHOTOV.2013.2281105 ↗