Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping
Source abstract
Abstract
Abstract Polycrystalline silicon (poly-Si) passivating contacts are promising technologies to promote the efficiency of silicon solar cells, due to their low carrier recombination and low contact resistivity. In this work, we present phosphorus spin-on doping as an alternative doping method to fabricate high performance poly-Si passivating contacts. The influences of thermal treatments and intrinsic amorphous Si thickness on poly-Si passivating contact quality were investigated. A high implied open-circuit voltage of above 730 mV together with a low contact resistivity below 4 mΩ⋅cm2 were obtained for 100 – 230 nm thick poly-Si layers after a thermal treatment at 975 °C for 60 min followed by a forming gas annealing. The promising results presented in this work imply that phosphorus spin-on doping can be an effective doping method alternative to conventional POCl3 diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
2. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
3. 655 mV open‐circuit voltage, 17.6% efficient silicon MIS solar cells10.1063/1.90646 ↗
4. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
5. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
6. Device physics underlying silicon heterojunction and passivating-contact solar cells: a topical review10.1002/pip.2959 ↗
7. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
8. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
9. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
10. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
11. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
12. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
13. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
14. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
15. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
16. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
17. Recombination analysis of phosphorus-doped nanostructured silicon oxide passivating electron contacts for silicon solar cells10.1109/JPHOTOV.2017.2779871 ↗
18. 730 mV implied Voc enabled by tunnel oxide passivated contact with PECVD grown and crystallized n+ polycrystalline Si
19. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
20. On the recombination behavior of p(+)-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces
21. Electrical and photovoltaenceic characteristics of poly-emitter solar cells10.1016/S0040-6090(97)00740-2 ↗
22. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
23. Phosphorus diffused LPCVD polysilicon passivated contacts with in-situ low pressure oxidation10.1016/j.solmat.2018.06.039 ↗
24. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
25. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗
26. High-quality doped polycrystalline silicon using low-pressure chemical vapor deposition (LPCVD)10.1016/j.egypro.2018.09.014 ↗
27. Ion implantation into amorphous Si layers to form carrier-selective contacts for Si solar cells10.1002/pssr.201409312 ↗
28. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
29. Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells10.1016/j.solmat.2017.05.055 ↗
30. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
31. IBC c-Si solar cells based on ion-implanted poly-silicon passivating contacts10.1016/j.solmat.2016.05.041 ↗
32. Building blocks for back-junction back-contacted cells and modules with ion-implanted poly-Si junctions
33. Selective emitter formation with a single screen-printed p-doped paste deposition using out-diffusion in an RTP-step10.1016/S0927-0248(02)00050-8 ↗
34. Screen printed boron emitters for solar cells10.1016/j.solmat.2007.02.005 ↗
35. All-screen-printed dopant paste interdigitated back contact solar cell10.1016/j.egypro.2015.07.038 ↗
36. ‘Spin-on glass’ films for semiconductor technology10.1007/BF02699653 ↗
37. Spin on dopants for high-performance single-crystal silicon transistors on flexible plastic substrates10.1063/1.1894611 ↗
38. Selective emitter formation process using single screen-printed phosphorus diffusion source10.1016/j.solmat.2012.11.013 ↗
39. Inkjet-printing of phosphorus and boron dopant sources for tunnel oxide passivating contacts
40. Controlled nanoscale doping of semiconductors via molecular monolayers10.1038/nmat2058 ↗
41. Wafer-scale, sub-5 nm junction formation by monolayer doping and conventional spike annealing10.1021/nl8032526 ↗
42. Spin-on organic polymer dopants for silicon10.1021/jz4019095 ↗
43. Ga2O3 MOSFETs using spin-on-glass source/drain doping technology10.1109/LED.2017.2675544 ↗
44. Ultra shallow and abrupt n+–p junction formations on silicon-on-insulator by solid phase diffusion of arsenic from spin-on-dopant for sub 50nm Si metal-oxide-semiconductor devices10.1016/j.mseb.2004.03.016 ↗
45. Low Cost Fabrication for High Efficiency Monocrystalline Silicon Solar Cells
46. Comparative Study of the Emitter Formation of a C-Si Solar Cell Using Gas and Spin on Dopant Sources
47. Comparison of Boron diffused emitters from BN, BSoD and H3BO3 dopants10.1088/2053-1591/3/12/125902 ↗
48. Optimization of boron spin on dopant (BSoD) diffusion for emitter formation in n- type c-Si solar cells10.1016/j.matpr.2018.11.089 ↗
49. Fogel · 2017
50. Gallium-doped poly-Si:Ga/SiO2 passivated emitters to n-cz wafers with iV(oc) > 730 mV10.1109/JPHOTOV.2017.2748422 ↗
51. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
52. Performance improvement of p-type silicon solar cells with thin silicon films deposited by low pressure chemical vapor deposition method10.1016/j.solener.2012.12.001 ↗
53. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
54. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
55. Measurement of the emitter saturation current by a contactless photoconductivity decay method
56. PVLighthouse · 2017
57. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
58. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
59. Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells
60. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
61. Impact of phosphorus diffusion on n-type poly-Si based passivated contact silicon solar cells10.1016/j.solmat.2019.110120 ↗
62. Ion implanted passivated contacts for interdigitated back contacted solar cells
63. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
64. Ion implantation into amorphous Si layers to form carrier-selective contacts for Si solar cells10.1002/pssr.201409312 ↗
65. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
66. Development of thin polysilicon layers for application in monoPolyTM cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
67. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗