Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells
Source abstract
Abstract
Abstract For screen-printed silicon solar cells, optimization of the contact characteristics between the front metal electrode and silicon is very significant for realizing high efficiency. As technology advances, the solar cell efficiency has been steadily increased. Especially, as surface recombination becomes more important in high efficiency solar cells, understanding and controlling recombination in the metal contact area are necessary. Recombination at the metal-silicon interface is a major cause of the drop in the open-circuit voltage (Voc) of a solar cell. Thus far, the study of electrodes in silicon solar cells has been largely aimed at reducing the series resistance, and few studies on recombination due to electrodes have been performed. Quantitatively evaluating the recombination in electrodes to assess the effect on the efficiency is expected to become more important in the near future. In this paper, the contact characteristics of a screen-printed silver electrode and silicon interface were analyzed using saturation current density (Jo) measurements according to the surface doping concentration and firing temperature. The effects of the contact characteristics on Voc and recombination were also investigated. Experimental results showed that Jo.pass decreased with decreasing surface doping concentration and Jo.metal increased with increasing surface doping concentration and firing temperature. For quantitative analysis of Jo.metal, the size and distribution of Ag crystallites were observed using SEM and TEM, and the Ag concentration was analyzed by ICP-OES measurements. The larger Jo.metal was, the higher the Ag crystallite concentration, indicating that the Ag crystallites under the electrode increased Jo.metal. The effect of Jo.metal on the electrical characteristics of the solar cell was analyzed by calculating the change in the surface recombination velocity and the decreased width of Voc. Through this study, the recombination in the metallized area, which is expected to become increasingly important, and particularly the effects of the doping profile of the emitter region and silver crystallites on the surface recombination were quantitatively assessed. The amount of silver crystallites on the silicon wafer was quantitatively analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Profile · 2015 · 2
2. Accurate determination of the emitter saturation current density for industrial P-diffused emitters
3. New measurement method for the investigation of space charge region recombination losses induced by the metallization of silicon solar cells10.1016/j.egypro.2011.06.203 ↗
4. Recombination at laser-processed local base contacts by dynamic infrared lifetime mapping10.1063/1.3517109 ↗
5. Comparison of emitter saturation current densities determined by injection-dependent lifetime spectroscopy in high and low injection regimes10.1002/pip.942 ↗
6. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
7. Specific contact resistance and carrier tunneling properties of the silver metal/porous silicon/p-Si ohmic contact structure10.1016/j.jallcom.2008.02.110 ↗
8. High-Temperature contact formation on n-Type silicon: basic reactions and contact model for Seed-Layer contacts10.1002/adfm.200901305 ↗
9. Impact of the phosphorus emitter doping profile on metal contact recombination of silicon wafer solar cells10.1016/j.solmat.2015.12.006 ↗
10. Co-optimisation of the emitter region and the metal grid of silicon solar cells10.1002/1099-159X(200011/12)8:6<603::AID-PIP333>3.0.CO;2-M ↗
11. Heavily doped Si: P emitters of crystalline Si solar cells: recombination due to phosphorus precipitation10.1002/pssr.201409138 ↗
12. Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus, gettering, and contact formation10.1063/1.4949326 ↗
13. Annealing, passivation and contacting of ion implanted phosphorus emitter solar cells10.1016/j.egypro.2012.07.113 ↗
14. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
15. Investigation of the mechanism resulting in low resistance ag thick-film contact to si solar cells in the context of emitter doping density and contact firing for current-generation ag paste10.1109/JPHOTOV.2013.2285621 ↗
16. Silver thick film contact formation ON lowly doped phosphorous emitters
17. Extending the limits of screen-printed metallization of phosphorus- and boron-doped surfaces10.1016/j.solmat.2016.05.064 ↗
18. Challenges for lowly-doped phosphorus emitters in silicon solar cells with screen-printed silver contacts10.1016/j.egypro.2017.09.274 ↗
19. Front-side Ag contacts enabling superior recombination and fine-line performance
20. Measurement of metal induced recombination in solar cells
21. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
22. Metallization-induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
23. Sinton · 2002
24. The effect of emitter recombination on the effective lifetime of silicon wafers10.1016/S0927-0248(98)00179-2 ↗
25. King · 1990 · 37
26. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
27. Cuevas · 2002
28. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
29. I. Gordon, J. Szlufcik, Decreasing Metallization Related Recombinations For Screen Printed n-pert Cells By Selective Laser Doping and Reduction In Contact Fraction, (n.d.).
30. Silver thick-film contacts on highly doped n -type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
31. Physical understanding of printed thick-film front contacts of crystalline Si solar cells-Review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
32. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
33. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗
34. Analysis of aluminum back surface field at different wafer specifications in crystalline silicon solar cells10.1016/j.cap.2016.05.016 ↗
35. Rapid thermal processing for front and rear contact passivation
36. Al-amin · 2019 · 1
37. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗