Effect of S/(S+Se) ratio during the annealing process on the performance of Cu2ZnSn(S,Se)4 solar cells prepared by sputtering from a quaternary target
Source abstract
Abstract
Abstract Cu2ZnSn(S,Se)4 (CZTSSe) has gained significant attention as a solar cell absorber material owing to its great long-time application potential. In this study, the precursors deposited by single quaternary target sputtering were annealed in different S/S + Se ratios atmosphere and CZTSSe solar cells were prepared. The mechanism of the S/Se replacement process and its effect on the composition, morphology, bandgap, and performance of the CZTSSe solar cells were systematically investigated. It was found that a decrease in the Se content in the annealing atmosphere showed an effect on the growth and properties of the thin films similar to that shown by an increase in the S/(S + Se) ratio. However, this effect was much milder than that of the increase in the S/(S + Se) ratio. The S/(S + Se) ratio of the CZTSSe thin films could be controlled by varying their S and Se contents in the annealing atmosphere and then adjusting their bandgaps. An increase in the bandgap improved the open circuit voltage and efficiency of the resulting solar cells. The cell annealed with the S:Se molar ratio of 1:3 showed an efficiency of 8.41% without anti-reflection coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Emerging thin-film photovoltaic technologies10.1002/cite.201400101 ↗
2. Record efficiency for thin-film polycrystalline solar cells up to 22 . 9 % achieved by10.1109/JPHOTOV.2018.2882206 ↗
3. Solar cell efficiency tables (version 54)
4. Interplay between surface preparation and device performance in CZTSSe solar cells: effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗
5. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
6. Impact of molybdenum out diffusion and interface quality on the performance of sputter grown CZTS based solar cells10.1038/s41598-017-01605-7 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. The role of sulphur in the sulfurization of CZTS layer prepared by DC magnetron sputtering from a single quaternary ceramic target10.1016/j.ceramint.2018.03.225 ↗
9. Compositional disparity in Cu2ZnSnS4 (CZTS) thin film deposited by RF-sputtering from a single quaternary compound target10.1016/j.matlet.2018.03.098 ↗
10. High-sulfur Cu2ZnSn(S,Se)4 films by sulfurizing as-deposited CZTSe film: the evolutions of phase, crystallinity and S/(S+Se) ratio10.1016/j.jallcom.2016.11.335 ↗
11. Single elementary target-sputtered Cu2ZnSnSe4 thin film solar cells10.1016/j.solmat.2014.08.043 ↗
12. Preparation of Cu2ZnSnS4 (CZTS) sputtering target and its application to the fabrication of CZTS thin-film solar cells10.1016/j.jallcom.2015.09.111 ↗
13. Beyond 11% efficient Cu2ZnSn(Se,S)4 thin film solar cells by cadmium alloying10.1016/j.solmat.2017.09.043 ↗
14. High photo-conversion efficiency Cu2ZnSn(S,Se)4 thin-film solar cells prepared by compound-precursors and metal-precursors10.1016/j.solmat.2018.03.050 ↗
15. Effects of selenization on phase transition and S/(S+Se) ratios of as-deposited Cu2ZnSnS4 absorbers sputtered by a quaternary target10.1016/j.matlet.2015.10.087 ↗
16. Composition-and band-gap-tunable synthesis of wurtzite-derived Cu 2ZnSn(S1-xSex)4 nanocrystals: theoretical and experimental insights10.1021/nn3052296 ↗
17. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
18. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
19. The effect of S/(S+Se) ratios on the formation of secondary phases in the band gap graded Cu 2 ZnSn(S,Se) 4 thin film solar cells10.1016/j.jallcom.2019.04.118 ↗
20. Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells by S-modified surface layer10.1016/j.solmat.2016.12.033 ↗
21. The role of tuning Se/(S + Se) ratio in the improvement of Cu2MnSn(S, Se)4 thin films properties and photovoltaic device performance10.1016/j.solener.2018.12.076 ↗
22. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
23. Controlled substitution of S by Se in reactively sputtered CZTSSe thin films for solar cells10.1016/j.jallcom.2015.06.276 ↗
24. Influencing mechanism of the selenization temperature and time on the power conversion efficiency of Cu2ZnSn(S,Se)4-Based solar cells10.1021/acsami.6b05201 ↗
25. Single-step sulfo-selenization method to synthesize Cu 2ZnSn(SySe1-y)4 absorbers from metallic stack precursors10.1002/cphc.201300157 ↗
26. Influence of the annealing atmosphere and precursor's thickness on the properties of CZTSSe based solar cells10.1016/j.solmat.2018.11.001 ↗
27. Nanoparticle-based Cu2ZnSn(S,Se)4 solar cells with a 9.1% efficiency obtained by an optimization of sintering process10.1002/solr.201700063 ↗
28. Characteristics of Cu2ZnSn(SxSe1−x)4 thin-film solar cells prepared by sputtering deposition using single quaternary Cu2ZnSnS4 target followed by selenization/sulfurization treatment10.1016/j.solmat.2016.12.042 ↗
29. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗
30. Effect of HCl and NH4OH etching on CZTSSe absorber layer10.1016/j.vacuum.2018.06.038 ↗
31. Temperature dependence of the optical properties of ZnSe films deposited on quartz substrate10.1007/s00339-005-3472-1 ↗
32. Resonant Raman scattering measurements of strains in ZnS epilayers grown on GaP10.1063/1.1477282 ↗
33. Optical phonon anisotropies in the layer crystals SnS2 and SnSe2
34. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
35. Photoluminescence and Raman study of Cu2ZnSn(Se xS1 - X)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
36. Growth and characterization of Cu 2ZnSn(S,Se) 4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
37. The role of sulphur in the sulfurization of CZTS layer prepared by DC magnetron sputtering from a single quaternary ceramic target
38. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
39. Ge doped Cu 2 ZnSnS 4 : an investigation on absorber recrystallization and opto-electronic properties of solar cell10.1016/j.solmat.2019.04.011 ↗
40. Formation of the front-gradient bandgap in the Ag doped CZTSe thin films and solar cells10.1016/j.jechem.2019.03.026 ↗
41. Critical review on sputter-deposited Cu 2 ZnSnS 4 (CZTS) based thin film photovoltaic technology focusing on device architecture and absorber quality on the solar cells performance10.1016/j.solmat.2017.05.064 ↗
42. CZTS-based materials and interfaces and their effects on the performance of thin film solar cells
43. Interfaces of high-efficiency kesterite Cu2ZnSnS(e)4 thin film solar cells10.1088/1674-1056/27/1/018803 ↗
44. Potassium-induced surface modification of Cu(In,Ga)Se 2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
45. Preparation of homogeneous Cu(InGa)Se2films by selenization of metal precursors in H2Se atmosphere10.1063/1.114424 ↗
46. Enhancing the Cu 2 ZnSnS 4 solar cell efficiency by back contact modification: inserting a thin TiB 2 intermediate layer at Cu 2 ZnSnS 4/Mo interface
47. On the interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗