Epitaxial lift-off of InGaAs solar cells from InP substrate using a strained AlAs/InAlAs superlattice as a novel sacrificial layer
Source abstract
Abstract
Abstract In this work we present a new epitaxial lift-off (ELO) approach based on the use of a strained AlAs/InAlAs superlattice (SL) as sacrificial layer for InP related materials. Such an ELO process enables the fabrication and transfer of a thin active III-V heterostructure via its separation from its III-V parent substrate using selective chemical etching. The strategy is of particular interest for large area devices such as solar cells. The process studied here also allows the substrate reuse for a low-cost approach based on III-V-based device fabrication. In order to realize the ELO process on InP substrates, the main difficulty is the lack of lattice-matched materials offering the high chemical etching selectivity needed over both the substrate and the lattice-matched alloys of the active heterostructure. The present study therefore contributes effective strategy for overcoming the latter constraints. The AlAs/InAlAs SL was thus explored as a potential candidate as sacrificial layer for the InP lattice matched materials. The growth conditions of such SLs were investigated to produce low defect SLs compatible with the properties of an optimal sacrificial layer. The under-etching behavior of such SLs in a hydrofluoric acid-based solution was also studied in detail. The results show that advantageous under-etching rates, high enough for a full wafer detachment, combined with a low defect density, can be obtained with novel sacrificial layers based on such thin AlAs/InAlAs SL. Finally, the fabrication of solar cells via an active heterostructure grown over an optimized SL on a monolithic substrate and via a thin reported active heterostructure was performed. The solar cells perform well and demonstrate the suitability of such SLs as a sacrificial layer for InP related materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Four-junction wafer-bonded concentrator solar cells10.1109/JPHOTOV.2015.2501729 ↗
2. Quantum cascade laser10.1126/science.264.5158.553 ↗
3. Electron transport in Multigate InxGa1−xAs nanowire FETs: from diffusive to ballistic regimes at room temperature10.1021/nl4038399 ↗
4. InGaAs/AlInGaAs THz quantum cascade lasers operating up to 195 K in strong magnetic field10.1088/1367-2630/17/2/023050 ↗
5. Recent advances in avalanche photodiodes10.1109/JLT.2006.888481 ↗
6. Techno-economic analysis of three different substrate removal and reuse strategies for III-V solar cells10.1002/pip.2776 ↗
7. Reuse of GaAs substrates for epitaxial lift-off by employing protection layers10.1063/1.3684555 ↗
8. High efficiency GaAs thin film solar cells by peeled film technology10.1016/0022-0248(78)90449-9 ↗
9. Extreme selectivity in the lift‐off of epitaxial GaAs films10.1063/1.98946 ↗
10. Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics10.1038/ncomms2583 ↗
11. 26.1% thin-film GaAs solar cell using epitaxial lift-off10.1016/j.solmat.2009.03.027 ↗
12. Highly efficient single-junction GaAs thin-film solar cell on flexible substrate10.1038/srep30107 ↗
13. Solar energy materials and solar cells epitaxial lift-off (ELO) of InGaP/GaAs/InGaAs solar cells with quantum dots in GaAs middle sub-cell10.1016/j.solmat.2018.05.016 ↗
14. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
15. B.M. Kayes, H. Nie, R. Twist, S.G. Spruytte, F. Reinhardt, I.C. Kizilyalli, G.S. Higashi, 27.6% Conversion efficiency, a new record for single-junction solar cells under 1 sun illumination, in: Proceedings of the 37th IEEE Photovolt. Spec. Conference, IEEE: 2011: pp. 4–8. 〈doi:10.1109/PVSC.2011.6185831〉.10.1109/PVSC.2011.6185831 ↗
16. Optimum atomic spacing for AlAs etching in GaAs epitaxial lift-off technology
17. High rate epitaxial lift-off of InGaP films from GaAs substrates10.1063/1.126276 ↗
18. Diffusion and reaction related model of the epitaxial lift-off process10.1149/1.2779968 ↗
19. Etch rates of Ge, GaAs and InGaAs in acids, bases and peroxide based mixtures10.1149/1.2986802 ↗
20. Strain relaxation in lattice-mismatched epitaxy10.1016/0254-0584(95)01485-3 ↗
21. Flexible thin-film ingaas photodiode focal plane array10.1021/acsphotonics.6b00042 ↗
22. High-speed InP/GaInAs photodiode on sapphire substrate10.1049/el:19891108 ↗
23. Multiple growths of epitaxial lift-off solar cells from a single InP substrate10.1063/1.3479906 ↗
24. Superlattice AlAs/AlInAs-oxide current aperture for long wavelength InP-based vertical-cavity surface-emitting laser structure10.1063/1.122738 ↗
25. Increased lateral oxidation rates of AlInAs on InP using short-period superlattices10.1007/s11664-004-0271-y ↗
26. Sacrificial etching of AlxGa1-xAs for III-V MEMS surface micromachining10.1007/s00339-007-4032-7 ↗
27. Hydrolyzation oxidation of AlxGa1−xAsAlAsGaAs quantum well heterostructures and superlattices10.1063/1.103759 ↗
28. A method of highly efficient hydrolyzation oxidation of III–V semiconductor lattice matched to indium phosphide10.1063/1.124662 ↗
29. Defects in epitaxial multialyers
30. Misfit strain relaxation in GexSi1-x/Si heterostructures: the structural stability of buried strained layers and strained-layer superlattices10.1063/1.345613 ↗
31. Gaalas-based micromachined accelerometer10.1080/08957950008202576 ↗
32. Application of spectrally resolved scanning photoluminescence to assess relaxation processes of InGaAs and InAlAs layers strained in compression and tension10.1016/S0921-5107(96)01696-0 ↗
33. Design rules for dislocation filters10.1063/1.4892162 ↗
34. Design criteria for structurally stable, highly strained multiple quantum well devices10.1063/1.111111 ↗
35. Molecular beam epitaxy of strain-compensated InGaAs/GaAsP quantum-well intersubband photodetectors10.1016/S0022-0248(96)01007-X ↗
36. D.M. Hwang, R. Bhat, S.A. Schwarz, Y. Chen, Partial Dislocations and Critical Thicknesses for Strained Layer Relaxation, in: Mat. Res. Soc. Symp. Proceedings Vol. 263: 1992: pp. 421–426.10.1557/PROC-263-421 ↗
37. Influence of radius of curvature on the lateral etch rate of the weight induced epitaxial lift-off process10.1016/S0921-5107(02)00240-4 ↗
38. Etching AlAs with HF for Epitaxial Lift-Off Applications10.1149/1.1690293 ↗
39. 40% efficient metamorphic GaInP/GaInAs/Ge multijunction solar cells10.1063/1.2734507 ↗
40. J.L. Cruz-Campa, A. Tauke-Pedretti, J.G. Cederberg, C.A. Sanchez, G.R. Girard, C. Alford, B.A. Aguirre, I. Luna, M. Okandan, J.S. Nelson, G.N. Nielson, Power maximization in III-V sub-millimeter, radial front contacted cells for thin micro-concentrators, in: 2014 IEEE 40th Photovolt. Spec. Conference, IEEE, Denver, CO, USA: 2014: pp. 471–475. 〈doi:10.1109/PVSC.2014.6924961〉.10.1109/PVSC.2014.6924961 ↗
41. Analysis of perimeter recombination in the subcells of GaInP/GaAs/Ge triple-junction solar cells10.1002/pip.2501 ↗
42. I. Mathews, D. O’Mahony, A. Gocalinska, E. Pelucchi, K. Thomas, A.P. Morrison, B. Corbett, InAlAs and InGaAs solar cell development for use in monolithic triple-junction solar cells with improved sprectrum splitting, in: 28th Eur. Photovolt. Sol. Energy Conference Exhib., EUPVSEC: 2013: pp. 356–360. 〈doi:110.4229/28thEUPVSEC〉. 2013-1AV.2.40.
43. Material studies regarding InP-based high-efficiency solar cells10.1016/j.jcrysgro.2005.10.121 ↗