Effect of inner coatings on the stability of chloride-based phase change materials encapsulated in geopolymers
Source abstract
Abstract
Abstract In the current study pre-formed geopolymer half shells were fabricated from a combination of fly ash and black slag. Five (5) geopolymer shells were filled with a chloride-based phase change material (PCM) with a melting point of 540 °C for use in a high temperature thermal energy storage system (TESS). Additionally, three (3) of these shells contained an inner coating of alumina (various manufacturers) while another geopolymer shell was pre-fired at 610 °C. The half shells were cycled around the melting point of the PCM (500–580 °C) for five (5) cycles, with the mass change of the samples recorded. Of the five (5) samples only the Aremco-coated sample suffered less PCM loss than the control. Furthermore, the melting point and latent heat of PCM samples from the geopolymer half shells were measured by differential scanning calorimetry (DSC) to find if degradation occurs. In all samples the PCM melting point was not affected while the latent heat was significantly affected. Additionally, the Aremco-coated sample resulted in PCM segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. United Nations. The Paris Agreement, 2016. Available at: 〈http://unfccc.int/paris_agreement/items/9485.php〉.
2. J. Jenkins. A look at wind and solar, Part 2: is there an upper limit to variable renewables? The Energy Collective, 2015. Available at: 〈http://www.theenergycollective.com/jessejenkins/2233311/look-wind-and-solar-part-2-there-upper-limit-intermittent-renewables〉.
3. Quanta Technology. Grid Impacts and solutions of renewables at high penetration levels, 2009. Available at: 〈http://quanta-technology.com/sites/default/files/doc-files/Grid-Impacts-and-Solutions-of-Renewables-Executive-Summary.pdf〉.
4. International Electrotechnical Commission. Grid integration of large-capacity renewable Energy sources and use of large-capacity Electrical Energy Storage, 2012. Available at: 〈http://www.iec.ch/whitepaper/pdf/iecWP-gridintegrationlargecapacity-LR-en.pdf〉.
5. IEA-ETSAP, IRENARenewable energy integration in power grids- technology brief, 2015. Available at: 〈http://www.irena.org/DocumentDownloads/Publications/IRENA-ETSAP_Tech_Brief_Power_Grid_Integration_2015.pdf〉.
6. US Government. Incorporating Renewables into the Electric Grid: Expanding Opportunities for Smart Markets and Energy Storage, 2016. Available at: 〈https://www.whitehouse.gov/sites/default/files/page/files/20160616_cea_renewables_electricgrid.pdf〉.
7. NREL. Concentrating Solar Power Projects, 2017. Available at: 〈http://www.nrel.gov/csp/solarpaces/index.cfm〉.
8. Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage10.1016/j.rser.2015.03.038 ↗
9. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
10. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
11. Exploratory corrosion tests on alloys in molten salts at 900°C10.1007/BF02833573 ↗
12. Storage of thermal energy for effective use of waste heat from industries10.1016/0924-0136(94)01723-E ↗
13. Solomon · 2013
14. Encapsulated phase change materials for energy storage – characterization by calorimetry10.1016/j.solener.2012.10.003 ↗
15. High temperature calorimetry and use of magnesium chloride for thermal energy storage10.1016/j.renene.2012.08.036 ↗
16. Bhardwaj · 2015
17. C. Wickramaratne, F. Moloney, T. Pirasaci, R. Kamal, D.Y. Goswami, E. Stefanakos, J. Dhau Experimental study on thermal storage performance of cylindrically encapsulated PCM in a cylindrical storage tank with axial flow. in: Proceedings of the ASME 2016 Power Conference POWER (2016), June 26-30, 2016, Charlotte, North Carolina.10.1115/POWER2016-59427 ↗
18. H. Susskind, F.B. Hill, L. Green, S. Kalish, L.E. Kukacka, W.E. McNulty, Wirsing E. Jr. Corrosion studies for a fused salt-liquid metal extraction process for the liquid metal fuel reactor, in BNL 5851960, Brookhaven National Laboratory. Available at: 〈https://www.osti.gov/scitech/biblio/4023508〉.
19. Corrosion mechanism of aluminum in a molten mixture of lithium and potassium chlorides
20. Castable cements to prevent corrosion of metals in molten salts10.1016/j.solmat.2016.04.009 ↗
21. Geopolymer encapsulation of a chloride salt phase change material for high temperature thermal energy storage