Measurement of contact surface photo-voltage from forward bias C-V characteristics of P3HT:PCBM based BHJ solar cells
Source abstract
Abstract
Abstract The surface photovoltage (SPV) and carrier accumulation in open circuit conditions are sensitive indicators of the contact quality and band bending. However, these are not accessible directly in experiments. We analyze the capacitance-voltage (C-V) characteristics in P3HT:PCBM based bulk heterojunction to investigate SPV for both conventional (transparent anode) and inverted (transparent cathode) architectures. The C-V characteristics under dark conditions are analyzed using drift-diffusion model to extract built-in voltage, while under white light illumination it yields SPV. The SPV and the corresponding carrier density at the anode are quantified as a function of light intensity for conventional structure and compared with those of inverted structure to distinguish between the mechanisms in the two cases. The inverted structure with higher open circuit voltage is marked with less SPV compared to the conventional one. The technique of obtaining SPV as described here and the underlying mechanism can be used to suggest modifications in device architecture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Organic and perovskite solar cells: working principles, materials and interfaces10.1016/j.jcis.2016.11.021 ↗
2. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules10.1039/C5NR07426F ↗
3. Review: fullerene based acceptors for efficient bulk heterojunction organic solar cell applications10.1016/j.solmat.2016.11.024 ↗
4. Characterization and modeling of organic (P3HT:PCBM) solar cells as a function of bias and illumination10.1016/j.solmat.2016.06.001 ↗
5. Codependence between crystalline and photovoltage evolutions in P3HT:PCBM solar cells probed with in-operando GIWAXS10.1021/acsami.6b15661 ↗
6. Transient photocurrent and photovoltage mapping for characterisation of defects in organic photovoltaics10.1016/j.solmat.2016.11.029 ↗
7. Charge carrier generation, recombination, and extraction in polymer–fullerene bulk heterojunction organic solar cells
8. Simulating charge transport in organic semiconductors and devices: a review10.1088/1361-6633/80/2/026502 ↗
9. Enhancement of organic photovoltaic device performance via P3HT: pcbm solution heat treatment10.1016/j.tsf.2017.01.047 ↗
10. Model of organic solar cell photocurrent including the Effect of charge accumulation at interfaces and non-uniform carrier generation10.1109/JEDS.2016.2602563 ↗
11. Direct determination of defect density of states in organic bulk heterojunction solar cells10.1063/1.4962827 ↗
12. Study of charge carriers’ transport in organic solar cells by illumination area shifting10.1016/j.solmat.2016.11.011 ↗
13. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
14. Achieving a high fill factor for organic solar cells10.1039/C6TA00126B ↗
15. Effect of non-ohmic contacts on the light-intensity dependence of the open-circuit voltage in organic solar cells10.1063/1.4960151 ↗
16. Increasing polymer solar cell fill factor by trap-filling with F4-TCNQ at parts per thousand concentration10.1002/adma.201601553 ↗
17. The role of space charge effects on the competition between recombination and extraction in solar cells with low-mobility photoactive layers10.1021/acs.jpclett.6b02106 ↗
18. Open circuit voltage decay transients and recombination in bulk-heterojunction solar cells10.1063/1.4879278 ↗
19. Wurfel · 2009
20. Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells10.1063/1.1889240 ↗
21. Origin of open circuit voltage in planar and bulk heterojunction organic thin-film photovoltaics depending on doped transport layers10.1063/1.2973199 ↗
22. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
23. Surface-charge accumulation effects on open-circuit voltage in organic solar cells based on photoinduced impedance analysis10.1039/C3CP54908A ↗
24. Surface photovoltage characterization of organic photovoltaic devices10.1063/1.4827104 ↗
25. Band bending in conjugated polymer layers10.1103/PhysRevLett.106.216402 ↗
26. Open-circuit voltage loss in annealed P3HT: perylene diimide bulk heterojunction solar cells10.1063/1.4980842 ↗
27. Work function and interface control of amorphous IZO electrodes by MoO3 layer grading for organic solar cells10.1016/j.solmat.2015.05.036 ↗
28. Overcoming electrode-induced losses in organic solar cells by Tailoring a quasi-Ohmic contact to Fullerenes via solution-processed alkali hydroxide layers
29. Band unpinning and photovoltaic model for P3HT:PCBM organic bulk heterojunctions under illumination10.1016/j.cplett.2008.09.035 ↗
30. Dielectric interface effects on surface charge accumulation and collection towards high-efficiency organic solar cells10.1063/1.4871466 ↗
31. Sensitivity of the Mott–Schottky analysis in organic solar cells10.1021/jp300397f ↗
32. Adding 0.2V to the open circuit voltage of organic solar cells by enhancing the built-in potential10.1063/1.4936367 ↗
33. Kelvin probe force microscopic imaging of the energy barrier and energetically favorable offset of interfaces in double-junction organic solar cells10.1021/am302235w ↗
34. Water-soluble polyfluorenes as an interfacial layer leading to cathode-independent high performance of organic solar cells10.1002/adfm.200902386 ↗
35. Controlling charge injection in organic electronic devices using self-assembled monolayers10.1063/1.120381 ↗
36. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
37. Coulomb barrier for charge separation at an organic semiconductor interface10.1103/PhysRevLett.101.196403 ↗
38. Built-in potential and validity of the Mott-Schottky analysis in organic bulk heterojunction solar cells10.1103/PhysRevB.84.153201 ↗
39. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
40. Negative capacitances in low-mobility solids10.1103/PhysRevB.72.235204 ↗
41. Negative capacitance caused by electron injection through interfacial states in organic light-emitting diodes10.1016/j.cplett.2006.02.060 ↗
42. Negative capacitance in organic semiconductor devices: bipolar injection and charge recombination mechanism10.1063/1.2752024 ↗
43. Effects of bulk and interfacial charge accumulation on fill factor in organic solar cells10.1063/1.4805053 ↗
44. Diffusive capacitance in space charge limited organic diodes: analysis of peak in capacitance-voltage characteristics10.1063/1.4812487 ↗
45. Limit of Voc in polymeric bulk heterojunction solar cells predicted by a double-junction model10.1016/j.solmat.2012.08.005 ↗
46. Origin of the open-circuit voltage in multilayer heterojunction organic solar cells10.1063/1.3027061 ↗
47. Molecular and Morphological Influences on the Open Circuit Voltages of Organic Photovoltaic Devices10.1021/ja9007722 ↗
48. Open-circuit voltage limit caused by recombination through tail states in bulk heterojunction polymer-fullerene solar cells10.1063/1.3358121 ↗
49. Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells10.1103/PhysRevB.84.075210 ↗
50. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗