The influence of wrinkled ZnO on inverted low bandgap thin film solar cells
Source abstract
Abstract
Abstract We discovered that fringe structures of ZnO film in solar cells of inverted structures penetrate through the active layer made of low bandgap polymers. The ZnO penetration leads to leakage current of the solar cells. To prevent the ZnO penetration, the thin film morphology was modified. By changing the solvent and inserting TiO 2 nanorods between ZnO film and the active layer, penetration can be avoided, so Rsh is improved from 110.3 Ω cm 2 to 374.7 Ω cm 2 and V oc from 0.36 V to 0.66 V. This result provides a promising route for employing low bandgap polymers to air-stable inverted structures with solution process. It is possible that inverted low bandgap polymer solar cells can achieve the goals of high performance and air stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
3. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
4. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
5. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
6. Improvement of inverted-type organic solar cells by mild oxygen plasma etching on polymer thin film10.1016/j.solmat.2010.05.028 ↗
7. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
8. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
9. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
10. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
11. Morphology evolution of spin-coated films of poly(thiophene−phenylene−thiophene) and [6,6]-phenyl-C71-butyric acid methyl ester by solvent effect10.1021/ma1000157 ↗
12. A low bandgap poly (2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
13. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
14. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
15. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
16. Inverted bulk-heterojunction plastic solar cells
17. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
18. Wrinkling of a two-layer polymeric coating10.1063/1.2043255 ↗
19. Wrinkling of a sol–gel-derived thin film10.1103/PhysRevE.71.011604 ↗
20. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO hole selective layer10.1063/1.3039076 ↗
21. ZnO nano-ridge structure and its application in inverted polymer solar cell10.1016/j.orgel.2009.08.011 ↗
22. Highly efficient polycarbazole-based organic photovoltaic devices10.1063/1.3182797 ↗
23. Dewetting of a sol–gel-derived thin film10.1021/la0519655 ↗
24. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
25. Fabrication, optical modeling, and color characterization of semitransparent bulk‐heterojunction organic solar cells in an inverted structure10.1002/adfm.201000176 ↗
26. Phase imaging and stiffness in tapping-mode atomic force microscopy10.1016/S0039-6028(96)01591-9 ↗
27. Imaging of polymers using scanning force microscopy: from superstructures to individual molecules
28. Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): fullerene10.1063/1.1929875 ↗
29. High-efficiency inverted polymer solar cells with solution-processed metal oxides10.1016/j.solmat.2011.05.005 ↗
30. Electronic transport through individual ZnO nanowires10.1063/1.1759071 ↗
31. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗