Electrochemical method for slicing Si blocks into wafers using platinum wire electrodes
Source abstract
Abstract
Straight grooves were formed in single crystalline Si wafers and poly-crystalline Si blocks in an aqueous solution containing HF by an electrochemical method using Pt wires (φ=50 μm) and a Pt foil as catalytic electrodes and a counter electrode, respectively. The grooves were formed by applying anodic potential of about 2.25 V vs. Ag/AgCl to the Pt wires, which were in contact with Si. The grooving rate and morphologies were dependent on HF concentrations. The grooving rate was also dependent on the pressure applied to the Si/Pt interface. Grooves with a width of about 55 μm were formed at the edge of a 250-μm-thick single crystalline wafer at a rate of 3.2 mm/h by processing in 15 mol dm−3 HF under a pressure of about 54×104 g/cm2. This pressure was necessary to increase the grooving rate. Possibly, an insulating porous silicon layer formed between Si and Pt was destroyed under this pressure. On applying this process to a poly-crystalline Si block, a Si wafer with a size of 1×1 cm2 was obtained by the electrochemical method. However, the slicing speed was lowered as the depth of grooves increased and it took 120 h to obtain the wafer. The slow exchange of HF solution in the groove was thought to be the main reason for the slow speed of slicing the Si block.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Nanostructures and Photoluminescence · Advanced Surface Polishing Techniques · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
2. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
3. Wafering of silicon crystals10.1002/pssa.200564508 ↗
4. Wafer slicing by internal diameter sawing10.1016/0141-6359(88)90092-X ↗
5. Vibration analysis of ID slicing process and wafer measurement10.4028/www.scientific.net/KEM.315-316.641 ↗
6. Stress analysis of a silicon-wafer slicer cutting the crystal ingot10.1115/1.2919259 ↗
7. Galerkin-based modal analysis on the vibration of wire-slurry system in wafer slicing using a wiresaw10.1016/j.jsv.2004.04.018 ↗
8. A finite element analysis of temperature variation in silicon wafers during wiresaw slicing10.1016/j.ijmachtools.2007.07.009 ↗
9. Study of electrical discharge machining technology for slicing silicon ingots10.1016/S0924-0136(03)00718-0 ↗
10. High-quality cutting of polished single-crystal silicon by wire electrical discharge machining10.1016/j.precisioneng.2004.12.004 ↗
11. Novel silicon wafer slicing technology using atmospheric pressure reactive microplasma10.1143/JJAP.47.5648 ↗
12. Morphology of nanoholes formed in silicon by wet etching in solutions containing HF and H2O2 at different concentrations using silver nanoparticles as catalysts10.1016/j.electacta.2007.01.035 ↗
13. Boring deep cylindrical nanoholes in silicon using silver nanoparticles as a catalyst10.1002/adma.200401681 ↗
14. Helical nanoholes bored in silicon by wet chemical etching using platinum nanoparticles as catalyst10.1149/1.2109347 ↗
15. Pore formation in silicon by wet etching using micrometer-sized metal particles as catalysts10.1039/b715639a ↗
16. Electrochemical grooving of Si wafers using catalytic wire electrodes in HF solution10.1149/1.3033735 ↗
17. Acceleration of groove formation in silicon using catalytic wire electrodes for development of a slicing technique10.1016/j.jmatprotec.2009.09.019 ↗
18. Direct-write patterning of microstructured porous silicon arrays by focused-ion-beam Pt deposition and metal-assisted electroless etching10.1063/1.1806992 ↗