journal article·2017-11

The impact of the oxidation on the optical properties of TaC

Ludovic Charpentier, Cyril Caliot

Publisher page

Abstract

Abstract A major challenge in the development of high-efficiency high-temperature solar receivers for concentrated solar power plants is the development of high-temperature materials with an ideal spectral selectivity (high solar absorptivity and low hemispherical total emissivity). TaC could be an interesting candidate due to its very good spectral selectivity, which could be increased by surface treatments and microstructuring. However, Ta2O5 presents the opposite selectivity. Therefore, we investigated the oxidation of TaC in air and in helium at 1100 K and determined the impact of this oxidation on the optical and thermal properties using reflectivity and bidirectional reflectance distribution function (BRDF) measurements and laser flash analysis (LFA), respectively. We observed that the oxidation in air was too severe. Additionally, the samples treated in helium were sufficiently oxidized by the residual oxygen to lose their spectral selectivity. Therefore, despite its promising optical properties, TaC cannot be used for high-temperature applications in air or even in helium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Semiconductor materials and devices · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Technology Roadmap: Concentrating Solar Power, International Energy Agency, 2010.
2. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
3. Central tower systems using the Brayton cycle
4. Impact of thermal energy storage integration on the performance of a hybrid solar gas-turbine power plant10.1016/j.applthermaleng.2016.05.175 ↗
5. Solar power towers using supercritical CO2 and supercritical steam cycles, and decoupled combined cycles
6. Thermomechanical behavior of a plate ceramic solar receiver irradiated by concentrated sunlight10.1016/j.solener.2014.08.039 ↗
7. Effect of directional dependency of wall reflectivity and incident concentrated solar flux on the efficiency of a cavity solar receiver10.1016/j.solener.2014.08.028 ↗
8. Influence of receiver surface spectral selectivity on the solar-to-electric efficiency of a solar tower power plant10.1016/j.solener.2016.02.008 ↗
9. Process and composition dependence of optical properties of zirconium, hafnium and tantalum borides for solar receiver applications10.1016/j.solmat.2016.06.028 ↗
10. Ultra-refractory Diboride Ceramics For Solar Plant Receivers10.1016/j.egypro.2014.03.050 ↗
11. Tantalum diboride-based ceramics for bulk solar absorbers10.1016/j.solmat.2014.07.012 ↗
12. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
13. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
14. Optical properties of dense zirconium and tantalum diborides for solar thermal absorbers10.1016/j.renene.2016.01.068 ↗
15. Ultra-refractory ceramics for high-temperature solar absorbers10.1016/j.scriptamat.2011.07.033 ↗
16. Experimental study of ceramic foams used as high temperature volumetric solar absorber10.1016/j.solener.2016.06.066 ↗
17. Heat and mass transfer in ceramic lattices during high-temperature oxidation10.1111/jace.13658 ↗
18. Oxidation of ultra-high temperature transition metal diboride ceramics10.1179/1743280411Y.0000000012 ↗
19. Oxidation behavior of ZrB2–MoSi2–SiC composites in air at 1500°C10.1016/j.ceramint.2010.09.034 ↗
20. Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi210.1557/jmr.2009.0232 ↗
21. Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds10.1016/S0955-2219(99)00129-6 ↗
22. Oxidation of ZrB2- and HfB2-based ultra-high temperature ceramics: effect of Ta additions10.1023/B:JMSC.0000041693.32531.d1 ↗
23. High temperature oxidation of Zr- and Hf- carbides: influence of matrix and sintering additive10.1016/j.jeurceramsoc.2013.05.022 ↗
24. Influence of surface roughness and temperature on the oxidation behavior of ZrC/SiC samples10.1016/j.ceramint.2016.03.236 ↗
25. High-temperature radiative properties of an yttria-stabilized hafnia ceramic10.1111/j.1551-2916.2010.04336.x ↗
26. S.A. Neyco Vacuum & Materials, 30 avenue de la Paix, 92170 Vanves, France.
27. E. Sani, L. Mercatelli, L. Sansoni, L. Silvestroni, D. Sciti, Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants, J. Renew. Sust. Energy 4, 033104.10.1063/1.4717515 ↗
28. 〈http://www.perkinelmer.com/product/lambda-950-uv–vis–nir-spectrophotometer-l950〉.
29. 〈https://surfaceoptics.com/products/reflectometers-emissometers/soc-100-hdr/〉.
30. 〈http://sms.schmitt-ind.com/products/casi-scatterometer/〉.
31. 〈https://www.netzsch-thermal-analysis.com/en/products-solutions/thermal-diffusivity-conductivity/lfa-457-microflash/〉.
32. Ultra high temperature ceramic composites
33. Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride10.1111/j.1551-2916.2005.00396.x ↗
34. Raman spectroscopy studies of carbide derived carbons10.1016/j.carbon.2008.08.004 ↗
35. Amorphous to crystalline transformation in Ta2O5 studied by Raman spectroscopy10.1002/jrs.3142 ↗
36. G173-03 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, ASTM International, West Conshohocken, 2012.
37. Composition design, phase transitions of a new polycrystalline Ni-Cr-Co-W base superalloy and its isothermal oxidation dynamics behaviors at 1300°C10.1016/j.matdes.2017.05.028 ↗
38. Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner10.1016/j.ceramint.2016.07.159 ↗