journal article·2017-05

Efficient nanostructured quasi-single crystalline silicon solar cells by metal-catalyzed chemical etching

Qiang Wang, Chengfeng Pan, Kexun Chen, Shuai Zou, Mingrong Shen, Xiaodong Su

Publisher page

Abstract

Abstract Seed-assisted cast quasi-single crystalline silicon (Qsc-Si) technique allows the production of efficient, low-cost solar cells. However, most of the Qsc-Si wafers still consist of single- and multi-crystalline silicon grains, which lead to difficulties when attempting to achieve high efficiency by using conventional acid or alkali texture processes. This paper highlights the fact that nano-textured Qsc-Si solar cells can reach efficiencies ranging from 18.4% to 18.9% by using the same metal-catalyzed chemical etching technique, along with a depressed color difference. A parallel sub-cell model is proposed to explain how to enhance the performance of Qsc-Si cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Solar photovoltaic energy policy and globalization: a multiperspective approach with case studies of Germany, Japan, and China10.1002/pip.2560 ↗
2. Large area tunnel oxide passivated rear contact n-typeSi solar cells with 21.2% efficiency10.1002/pip.2739 ↗
3. T. Kinoshita, D. Fujishima, A. Yano, A. Ogane, S. Tohoda, K. Matsuyama, Y. Nakamura, N. Tokuoka, H. Kanno, H.M. Sakata, M. Taguchi, The approaches for high efficiency HIT™ solar cell with very thin (<100μm) silicon wafer over 23%, in: Proceeding of the 26th EU-PVSEC, Hamburg 871-874, 2011.
4. The passivated emitter and rear cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
5. Review of light-induced degradation in crystalline silicon solar cells10.1016/j.solmat.2015.11.047 ↗
6. Growth and characterization of multicrystalline silicon ingots by directional solidification for solar cell applications10.1016/j.egypro.2011.06.152 ↗
7. Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells10.1016/j.solmat.2012.01.024 ↗
8. Advantage in solar cell efficiency of high-quality seed cast mono Si ingot10.7567/APEX.8.062301 ↗
9. Optimization via simulation of a seeded directional solidification process for quasi-single crystalline silicon ingots by insulation partition design10.1016/j.jcrysgro.2014.04.011 ↗
10. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
11. Local design of the hot-zone in an industrial seeded directional solidification furnace for quasi-single crystalline silicon ingots10.1016/j.jcrysgro.2012.07.039 ↗
12. Performance of solar cells fabricated from cast quasi-singlecrystalline silicon ingots10.1016/j.solener.2014.09.047 ↗
13. N. Stoddard, R. Sidhu, J. Creager, S. Dey, B. Kinsey, L. Maisano, C. Phillips, R. Clark, J. Zahler, Evaluating BP Solar’sMONO2™ material lifetime and cell electrical data, in: Proceedings of the IEEE Photovoltaic Specialists Conference 001163-001168, 2009.10.1109/PVSC.2009.5411225 ↗
14. V. Prajapati, E. Cornagliotti, R. Russell, J.M. Fernadez, R.F. Clark, N. Stoddard, P. Choulat, J. John, High efficiency industrial silicon solar cells on silicon MONO2 ™ cast material using dielectric passivation and local BSF, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg 1171–1174, 2009.
15. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
16. Nanomaterials and nanostructures for efficient light absorption and photovoltaics10.1016/j.nanoen.2011.10.002 ↗
17. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
18. Yuan · Appl. Phys. Lett. · 2009 · 95 · 12350110.1063/1.3231438 ↗
19. Microstructuring of silicon with femtosecond laser pulses10.1063/1.122241 ↗
20. Large-area multicrystalline silicon solar cell fabrication using reactive ion etching (RIE)10.1016/j.solmat.2010.03.029 ↗
21. Multi-scale surface texture to improve blue response of nanoporous black silicon solar cells10.1063/1.3636105 ↗
22. Black multi-crystalline silicon solar cells10.1002/pssr.200600064 ↗
23. Black nonreflecting silicon surfaces for solar cells10.1063/1.2204573 ↗
24. Bastide · Phys. Status Solidi C. · 2009 · 6 · 153610.1002/pssc.200881016 ↗
25. 18.45%-efficient multi-crystalline silicon solar cell with nano-scale pseudo-pyramid texture10.1002/adfm.201401589 ↗
26. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
27. Influencing factors on the formation of the low minority carrier lifetime zone at the bottom of seed-assisted cast ingots10.1016/j.jcrysgro.2014.05.015 ↗
28. About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots10.1002/pip.2344 ↗
29. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method10.1016/j.solmat.2014.08.022 ↗
30. Analysis of mono-cast silicon wafers and solar cells on industrial scale10.1016/j.egypro.2012.07.036 ↗
31. Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells10.1002/pip.1221 ↗