High efficiency concentrated solar power plant receivers using periodic microstructured absorbing layers
Source abstract
Abstract
Abstract This study presents a rigorous modeling approach for 1D microstructured absorbing multi-layers for Concentrated Solar Power (CSP) receivers, taking into account both the absorption of the incident solar energy as well as the emissivity for the desired receiver temperature. Based on an optimized multilayer structure achieving high absorption, the authors demonstrate that 1D sub-wavelength period gratings can further increase the absorption and thus the efficiency of the CSP system. The C-method (Chandezon Method) is used to theoretically optimize the 1D grating profiles. An experimental demonstration of the combination of lithographic grating fabrication and absorptive layer deposition using standard silicon wafers as substrates is also presented. Experimental results show 96.5% absorption in the visible and UV range, representing an enhancement of almost 2% in comparison to non-structured coatings. Those results are promising for the design of future and competitive solar absorbers for CSP, especially since the microstructure fabrication approach can be applied to non-planar substrates such as tubes typically used as receivers in CSP plants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Submicrometer gratings for solar energy applications10.1364/AO.34.002476 ↗
2. Angle-dependent ray tracing simulations of reflections on pyramidal textures for silicon solar cells10.1016/j.solener.2014.09.025 ↗
3. Reflection of normally incident light from silicon solar cells with pyramidal texture10.1002/pip.1050 ↗
4. Flexible n-i-p thin film silicon solar cells on polyimide foils with textured ZnO:Ga back reflector10.1016/j.tsf.2014.09.026 ↗
5. Optimization of Si solar cells with full band optical absorption increased in all polarizations using plasmonic backcontact grating10.1016/j.ijleo.2013.07.079 ↗
6. Theoretical investigation on the absorption enhancement of the crystalline silicon solar cells by pyramid texture coated with SiNx:H layer10.1016/j.solener.2010.12.020 ↗
7. 1D trilayer films grating with W/SiO2/W structure as a wavelength-selective emitter for thermophotovoltaic applications10.1016/j.jqsrt.2015.02.002 ↗
8. Wavelength-selective and diffuse emitter enhanced by magnetic polaritons for thermophotovoltaics10.1063/1.3684874 ↗
9. Solja, Evelyn N. Wang, Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters10.1016/j.solmat.2013.12.012 ↗
10. Optics of solar central receiver systems: a review10.1364/OE.24.00A985 ↗
11. Solar thermal collectors and applications10.1016/j.pecs.2004.02.001 ↗
12. Optical modeling of multilayered coatings based on SiC(N)H materials for their potential use as high-temperature solar selective absorbers10.1016/j.solmat.2013.06.030 ↗
13. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
14. Kennedy · 2002
15. Tungsten black absorber for solar light with wide angular operation range10.1063/1.2936997 ↗
16. Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion10.1016/S0927-0248(02)00364-1 ↗
17. Microstructural optimization and extended durability studies of low-cost rough graphite– aluminium solar absorber surfaces10.1016/j.renene.2003.11.008 ↗
18. Periodical surface structuring of metals by laser interference metallurgy as a new fabrication method of textured solar selective absorbers
19. Spectral selective surfaces for concentrated solar power receivers by laser sintering of tungsten micro and nano particles10.1016/j.solmat.2013.07.013 ↗
20. Experimental methods for the preparation of selectively absorbing textured surfaces for photothermal solar conversion10.1016/0165-1633(80)90028-3 ↗
21. Directional selectivity, emittance, and absorptance properties of Vee corrugated specular surfaces10.1016/0038-092X(63)90036-7 ↗
22. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
23. High performance solar-selective absorbers using coated sub-wavelength gratings10.1364/OE.18.005525 ↗
24. Design of selective coatings for solar thermal applications using subwavelength metal-dielectric structures10.1117/12.826803 ↗
25. Multicoated gratings: a differential formalism applicable in the entire optical region10.1364/JOSA.72.000839 ↗
26. Rigorous coupled-wave analysis of planar-grating diffraction,10.1364/JOSA.71.000811 ↗
27. Maximizing concentrated solar power (CSP) plant overall efficiencies by using spectral selective absorbers at optimal operation temperatures10.1016/j.solener.2015.07.023 ↗
28. Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications10.1016/j.apsusc.2007.07.109 ↗
29. MCGrating, Diffraction Grating Design and Analysis Software, 〈www.mcgrating.com〉
30. A comparative study of optical designs and solar flux concentrating characteristics of a linear fresnel reflector solar concentrator with tubular absorber10.1016/0927-0248(94)90302-6 ↗
31. Lattice Monte Carlo models of thin film deposition10.1016/S0040-6090(99)01057-3 ↗